New permanent magnet motor on youtube from Roobert33

[wings]

 :'
(

Maybe I have not explained me well ...
In the previous comment I wrote that I made a copy of the first V-gate in two days.
It understands very well that this my new V-gate is not the original one, even a child would understand.
The first V-gate I have sold it to a person long ago, as a way of mechanical beauty and I couldn't do the photos to it, in addition I can't  make a new video with the breath of the air that turns the toy, I would be certainly bombarded by criticism of YT users.

However, I have already explained you that the V-gate can't just work alone, if so, it would be the perpetual motion, you realize it or not? I would do the most sensational discovery of the millennium ...
And you think, I would be now here at the Forum to waste time arguing about it?

[Arrow]

Next in line, for me, is to map out the V-Gate on a paper stencil that can be transferred to my aluminum rotor.
I also plan to fabricate a brass rocker and still looking for additional materials to accomplish this.

That is all for now.

}:>

Dear Scorch, thanks for your comments and video, if someone need to read about this video go  and read this - http://www.scribd.com/doc/242432/Ed-Leedskalnin-Magnetic-Current-Illustrated

I am not already focused on sold things like this motor on video etc "basta".We are loosing time with all these long explanations because perpetual motion is NOT possible. If people still can "see" it then they have to study phisics better to find out  the real things why they can see  such  behaviour from physical things. If study phisics not brings result - it means we still need to develop fundamental phisics to understand things better and deeper. Actually, Man has to be not smart and/or intelegant to claim such patents from officials if "it" is not supported by fundamental phisics.

Simple and short advise to anyone here to protect their new inventions - find relevant fundamental phisics words to explane your inventions and protect yourself and your inventions.Dont try to elevate the Earth mass to your shoulder - just do your best for people with new inventions, start trust to your eyes and knowledge  to trust people. Start allocate money to put your inventions into mass production if you trust to things that you can see as working cakes of sweet:) Avoid all crazy words about free energy and God will open mind of mass people to accept your inventions.Up to now nobody in the world knows exactly why planes are flying.
There are billions of pages and innovations about aerodynamics, but when you want to construct new airplane by its structure all fundamental guys asking 1 thing - construct, fly, if everything will go OK then we will support you and find relevant words for your invention with million pages of base even if it is argue with aerodynamics rules:)... good prove of my words is here http://www.youtube.com/watch?v=ONIsc1zRWpA

See also NASA new concept below - it is now already flying in my apartment in small scale:) Do I need to know exactly why it is flying? No! Dose anybody need to write million pages to explane it's flight? It is fling good and I dont care else:) I am just creating staff and giving to relevant guys as the gift!If they will to share money from new OK, if not, I will live further with my new inventions... I will change guys who took my new and did not pay to me - no problem, I am able to earn money from air because I have friends, good friends:) Patents are sucks...sick and tired of that papers...

http://www.youtube.com/watch?v=uSPgAdHPWoU


Nothing is free in our space and galatics guys because there was 1-st big boom that starts all in our universe and universe itself and it is the only overunity energy! If some one not agree with unic universe and God overunity - go and kill yourself to find God "secrects" and make your own univers:) I dont care personally.... I am not able and dont have such wish to argue with God if you are Gods here!You are too big as sky to see you personally and talk to argue:)

Stop using empty words - words are weapon to make our life better!
------------
I want to be helpfull to you in fabrication works and deduct all those many words here to get our own result:)
So dear Scorch, to help you go forward faster with drawings mapping - here below I upload video of one Russian RC champ - very easy technology, that show how we are putting laser toner lines from paper to metal or wood to make RC plane models, I guess there is no matter where it can be used It is really good mapping technology of scaled drawings even to metal for further fabrications in  1:1 scale. You need aceton and mirror laser prints on paper.

http://www.youtube.com/watch?v=VwxKE63QkMI

Thank you for your communication with me.I really appreciate it!!!

Truly
Rob

[Arrow]

:'
(

Dear wings, please, explane your emotions Sir?

[Arrow]

I love this channel guys and want to share it with you to show how nice our Earth from space by on line video cam from MIR space station and why we have to keep her happy with our works and life style.
Also see comments in my YT
http://www.youtube.com/watch?v=GDZMWeSGfV8
link to Johnson Space Center on line space video cam. copy and paste to your browser.
mms://a1709.l1856953708.c18569.g.lm.akamaistream.net/D/1709/18569/v0001/reflecto­r:53708

Truly,
Rob

[Scorch]

I do have hard copies of Ed's books on my shelf as well as the Passels Information Network book, about Ed, titled: "How to read his writings".

I actually have no concern; when the current state of physics says: "Perpetual motion is impossible".
Just as I have no concern; when the current state of physics (of the PAST) says: "Heavier than air, powered, flight is impossible".

None of these things are relevant if I can still tap into the forces of the universe and build a device that gives the APPEARANCE of 'perpetual motion'.

Just because I, and physics, can't explain how Ed built, and lighted, his castle doesn't mean he didn't do it.

You are correct in stating there is no reason to continue such a philosophical discussion. If the orbits of planets, for billions of years, is not considered to be 'perpetual motion' then whats the point of discussing any farther?

On the other hand, Ed could still tap into whatever energy keeps the planets in orbit, and use this energy to levitate, and perfectly balance, 30 ton blocks of coral and also keep his generator spinning.

So WHAT is IT?

If we can't call it "perpetual motion" then lets just called it: "Unexplained Continuous Motion". (Explanation to come at a later date when science finally catches up to what Ed (and the Wright brothers) accomplished.

Thank you for your advice on transferring an image but I am planning a simpler approach.

This device gives me the impression that it really should be a demonstration TOY that anybody can build. Therefore my goal is to try and keep it as simple as possible. This way, if it actually works, anybody else can throw one together and pass on the knowledge.

My plan to "map it out" is to use nothing more than a piece of paper, the width and length of the rotor surface, a ruler, and a little basic math.

Simply based on how many ferrites will fit into a V-Shape pattern with spacing somewhere around half the diameter of the ferrites. It simply needs to look good, and symmetrical, and hopefully replicate whats in the original video.

Once this is drawn on paper, using my pen, I will make a hole for the position of each ferrite. Then simply lay the paper on the rotor and use my pen to place a marks on the rotor. Then I can attach ferrites.

This is all accomplished by 'dead reckoning' with no complicated math or fancy engineering procedures.
A picture, in my mind, I then build with my hands.

Just like your video of the unusual aircraft that doesn't look like it will fly.
All I need to know is that I can create an airfoil shape by simply attaching a board, and all the wiring, on top of a totally flat wing. Doesn't matter if its aerodynamically efficient as long as I create a low pressure differential on top of the wing and build a relatively balanced aircraft. And even balance is not super critical because control surfaces can compensate to a certain extent. Therefore pigs, and lawnmowers, can fly!

And, in the case of this device, all I need to know is that a V-Shape concentrates magnetic force. Which has been in front of my face all my life. Try picking up some nails with a magnet. Ever wonder WHY they always "stick" the strongest at the POINTS of the nails instead of the heads where there is actually more, ferrous, mass?

I see you have added a copy of that video, I showed you the other day, to your youtube page. Glad to see it because, sometimes, these videos disappear and I probably should do the same at my own youtube page.

This video is just another great demonstration of the V-Gate effect.
Just like the V-Gate tracks and cars that many have replicated, it simply uses a series V shaped, ferrous, pieces configured as four, separate, and staggered tracks resulting in a continuous motion as four magnets continuously attract each track of V-gates as they come around.
And it was built using common stuff including a 4" PVC pipe union, CD, CD drive bearing, ceramic magnets and what I assume is just soft iron, V-Shaped, pieces that appear to be some type of horse shoe nails or rail spikes.

See Unexplained Continuous Motion (UCM) video here:
http://www.youtube.com/watch?v=aBIx_bq6f3g

}:>

------------
I want to be helpfull to you in fabrication works and deduct all those many words here to get our own result:)
So dear Scorch, to help you go forward faster with drawings mapping - here below I upload video of one Russian RC champ - very easy technology, that show how we are putting laser toner lines from paper to metal or wood to make RC plane models, I guess there is no matter where it can be used It is really good mapping technology of scaled drawings even to metal for further fabrications in  1:1 scale. You need aceton and mirror laser prints on paper.

http://www.youtube.com/watch?v=VwxKE63QkMI

Thank you for your communication with me.I really appreciate it!!!

Truly
Rob