Practical Method for Production of Water Fuel with Piezoelectric

[Slovenia]

Well, I found a transducer supplier in China who will sell you one 40 KHz ultrasonic cleaning transducer for $6.50 but the shipping is still high at $32.00, but I ordered one anyway.  They want to ship them out fast and that's the reason for the expensive postage.  Mine is FEDEX Air.  Anyway, it's a better shipping cost than Mary's.  Hers was $61 shipping for one or ten.  The website I used was: http://www.bjccwy.com

I found this company on Aliexpress.  Aliexpress was one of the sites recommended by Power To Be.

I'm finding that most of the transducer sites won't get back to me for whatever reason.

[Slovenia]

Hi Power To Be,

I hope you are still hanging around.  You mentioned in one of your posts that the transducers needed to be attached in a certain way inside the cell but you didn't explain how.  Would you please elaborate on that.  Thanks!!

Best Regards,
Slovenia

[superman9976]

Hey Solvenia,

Sorry I have been busy this week with my cdi.  My brother and I figured out how to delay the firing of the ignition by intercepting the ecm signal for a few ms.  Since it wasn't running right because it was firing too soon.  Then we wanna change the injector pulse width by intercepting it and make it shorter by 1 - 2 ms to force lean.  I have some krupa plugs on the way now too.  I also am working on my mag heater changing a box fan into a heater.   I wanted to share this link with you it is very similar to what power to be has proposed and it put some new ideas in my head.  I think about this stuff everyday and work on it when I can. 
http://waterfuelcell.org/phpBB2/viewtopic.php?t=210

I'm glad you received your parts so you can start having some fun.    Did you notice power to be hasn't been online here since april 12th?  I wonder what he's up too?

I still can't figure out how to really attach zinc to a substrate.  I draw a blank on what material to use.
chris

[altrez]

Hey Solvenia,

Sorry I have been busy this week with my cdi.  My brother and I figured out how to delay the firing of the ignition by intercepting the ecm signal for a few ms.  Since it wasn't running right because it was firing too soon.  Then we wanna change the injector pulse width by intercepting it and make it shorter by 1 - 2 ms to force lean.  I have some krupa plugs on the way now too.  I also am working on my mag heater changing a box fan into a heater.   I wanted to share this link with you it is very similar to what power to be has proposed and it put some new ideas in my head.  I think about this stuff everyday and work on it when I can. 
http://waterfuelcell.org/phpBB2/viewtopic.php?t=210

I'm glad you received your parts so you can start having some fun.    Did you notice power to be hasn't been online here since april 12th?  I wonder what he's up too?

I still can't figure out how to really attach zinc to a substrate.  I draw a blank on what material to use.
chris

Chris,

I am interested in the Mag Heater can you please post some direct links to how its constructed. I have looked all over but cant seem to find any information.

Thanks!

-Altrez

[Slovenia]

Hi Chris,

Wow, Krupa plugs.  How do some of the rest of us get hooked up with your supplier?  Thanks.

Hopefully Power To Be is still in the wings waiting for us to show him some good results before he will respond.  I know he was very frustrated because everyone wasn't duplicating his stuff quickly and showing positive results.  He gave us much information but with many loose ends, so I hope he will be willing to share some more information with us soon.  My problem is that I'm just as interested in his higher self info as I am in this projects info, so my interests are split in the middle which is slowing me down because I have spent as much time as I could in both areas.  I figure if I figure out how to utilize that power he kept referring to that it would really help me with this project.  Anyway, I've found a lot of dead ends with respect to the higher self thing and so that's caused some frustration for me. 

With regard to my parts, they have all arrived for the JT now and also my function generator has arrived.  My wiring setup is a real mess, so I'm going to have to redo it on some hardboard to tidy it up.

Thanks for sharing your results.

It looks like most of the guys who were interested in this project have either dropped out or decided to go their own way.

Best Regards,
Slovenia

Hey Solvenia,

Sorry I have been busy this week with my cdi.  My brother and I figured out how to delay the firing of the ignition by intercepting the ecm signal for a few ms.  Since it wasn't running right because it was firing too soon.  Then we wanna change the injector pulse width by intercepting it and make it shorter by 1 - 2 ms to force lean.  I have some krupa plugs on the way now too.  I also am working on my mag heater changing a box fan into a heater.   I wanted to share this link with you it is very similar to what power to be has proposed and it put some new ideas in my head.  I think about this stuff everyday and work on it when I can. 
http://waterfuelcell.org/phpBB2/viewtopic.php?t=210

I'm glad you received your parts so you can start having some fun.    Did you notice power to be hasn't been online here since april 12th?  I wonder what he's up too?

I still can't figure out how to really attach zinc to a substrate.  I draw a blank on what material to use.
chris