The Kapanadze, Equipment to TEST your builds and testing ideas.

[electricme]

Bill:

I'm OK, don't worry, I'm being very careful, all my Hi Voltage leads are covered in special tubeing.

In my Auto Electrical days I have been hit with 15Kv off a spark plug coil once or twice, I am not about to repeat this.
The secret to success is knowledge, so I have been looking at quite a few Tesla sites, as they have knowledge that most people haven't a clue about, anyway I been waiting to see how interrested folks are in responding here.

Maybe the Kapanadze has died and fell off their radar!!!!!

I have a few sheets of perspex that I need to press into service.

Got myself a spark plug timing test set, the leads are copper cored and quite flexable and rated way above 2Kv.

Bought myself 4 X tall glass containers, these would make beautiful leaden jars, might try them in series or parallel, or not use them at all.

I have a question though for anyone who might know the answer.
When the electrodes are placed in the ground, what would be the best electrode to use, it's geometry, how deep? Would some perform better than others.

Say if someone has a working Kapanadze, what happens if the electrodes were moved to 90 degrees to where they were originally placed?
Is it possible to "tune" the Kapanadze by electrode placement.
Do Telleric currents flow in one direction one day, then flow in a different direction the next day? A bit like the direction clouds move overhead, to the east, or west etc

jim

[TEKTRON]

Bill:

I'm OK, don't worry, I'm being very careful, all my Hi Voltage leads are covered in special tubing.

In my Auto Electrical days I have been hit with 15Kv off a spark plug coil once or twice, I am not about to repeat this.
The secret to success is knowledge, so I have been looking at quite a few Tesla sites, as they have knowledge that most people haven't a clue about, anyway I been waiting to see how interrested folks are in responding here.

Maybe the Kapanadze has died and fell off their radar!!!!!

I have a few sheets of perspex that I need to press into service.

Got myself a spark plug timing test set, the leads are copper cored and quite flexable and rated way above 2Kv.

Bought myself 4 X tall glass containers, these would make beautiful leaden jars, might try them in series or parallel, or not use them at all.

I have a question though for anyone who might know the answer.
When the electrodes are placed in the ground, what would be the best electrode to use, it's geometry, how deep? Would some perform better than others.

Say if someone has a working Kapanadze, what happens if the electrodes were moved to 90 degrees to where they were originally placed?
Is it possible to "tune" the Kapanadze by electrode placement.
Do Telleric currents flow in one direction one day, then flow in a different direction the next day? A bit like the direction clouds move overhead, to the east, or west etc

jim

Dude, MOTS are nothing like like an auto ignition. 21 years ago I was working on a double cell wall oven with a micro in the top cell. We removed it from the wall and set it on the floor. While it was installed, the unit had no HV output. Now top removed, I pulled the filament (4 Vac) leads from the tube, inserted my 750 v test leads. I was holding them like chopsticks in one hand and the meter in the other. I told my partner to turn it on...There was a big arc flash.. it jumped through the leads, burning a hole through my middle fingernail, burned off the finger print, jumped into my left hand, down my arm across my heart and came out my belly. Burning a 1/2 inch hole in my sweatshirt. They said after about 2 full seconds I jumped away. The arc then came out of my chest at the center of my ribs. I thought I blew my hand off. I was screaming and I could not see. After a few minutes my vision returned. I picked my self up and quickly left the customers house as I thought I would vomit. I sat down on the curbside and completely locked up (shock). The ambulance came, they pried me onto a gurney. They started an I.V. And let the catheter bleed out on the ground to see if they were in a vein.  Clear plasma was pouring out of my vein on to the ground. The medic said "OH MY GOD!!! your blood is separated!!!" then started pushing ringers lactate. I nearly died that day! BE CAREFUL !!!!   

[electricme]

Dude, thanks for the yarn and welcome to the thread.

First TEKRON I am sorry you got injured through fault testing a microwave oven, seriously I hope you will be OK.
However what a dum thing it was to use the method you used to fault test it, I'm talking about using a 750 volt rating DMM and trying to heave (an ubnexpected) 2000 odd volts and current through it, no wonder the energy jumped out of the test leads and into your thumb, turning you into a lighting bolt in the process, it also must of had the HV Capacitor in circuit. Maybe a interlock switch was sticking somewhere in the works originally.

I know you were expecting just the filament voltage from the small coil inside the MOT to show up on the DMM.
I bet that DMM was bug eyed after that lot going through it.
If you are up to it, take a look at this site here, there is a ignitin coil that puts out more sparks that I ever seen a MOT do. http://members.iinet.net.au/~pterren/Other_HV_stuff.htm#Voltmeter you will need to browse up a little and you will see it, nice.

I get up and move a good distance away before applying power to any project I am working on before switch on, wether it's powered by batteries or otherwise.

Hope your thumb, blood plasma and the holy shirt are fixed up now.

jim

[Pirate88179]

Jim:

Are you going to use any caps with your multiple MOTs set-up?  Or, are they not needed?

Bill

[Pirate88179]

Hello I am a funeral director hahahahhahahahahahahh Now what on this earth is the purpose and reason for such a high starting voltage to power a few lights ohh I see its the high frequency to stimulate the emission of photons  hahahahhahahah One day very soon its going to go very badly wrong !

Why not normal operating current ?? ITS SAFE LEGAL AND IF YOU KNOW WHAT YOU ARE DOING IT WORKS IN THE SAME WAY BUT MUCH BETTER !

But I get it the death zone is what you like ok hahahahahahhahahahahaahahahhahaaaaahahahahahahahahahaahahahahaha

What a load of rubbish and why do you keep thinking up new ways to kill yourself ? My science team are watching in fact we are placing bets on the ones we fill will die first ! The real ma-coy starts with a 9 volt battery ! Do you see my point ?

Also in the death zone is the term nut-jobs oh yes this is a real term but its ok dont worry you only become a nut-job when you are dead as the job is done hahahahahhahaha !!!!!

So how many 10 year olds are going to give this a try hahaha ohh that's nor funny !!!!! So you want free energy how much does the parts cost hahahahahhahaahahahah .

Ohh ITS OVERUNITY HAHAHAHAHAHAHA THAT IS EVEN MORE FUNNY THAN A NUT-JOB AHAHAHAHAHAHAHAHAHAHAHAH
What is the full amount of energy in the system ? count all the electrons and protons newtons dont forget each proton is 1kw of pure energy ! So how many do you have ahahhahahahahahahahahahahahahhahahahahahahahahahhaahhahahaha

Now your want over-unity ok could you let me build a bunker first I am only 3000 miles away from you hahahahahahahah

good luck and hope that when you get cooked you use a few vegetables to go with the meal maybe you will find them here hahahahahahahahhahahahahahahahahahahahahahahahahahahahahaahahahahahhahahahahahhahahahahahahhahahahahha

ATOMMIX

Was this post intended to bring something intelligent to the topic being discussed here?  If so, I dare say you have missed the mark by a few miles, possibly more.