Confirming the Delayed Lenz Effect

[twinbeard]

Yes we have.  This is the basic premise of the "flowerpower device" I created:  Bifilar starship coil as prime mover, Bedini style.  I tend to like the smaller rotors (1/8" to 3/8")... while they are hard get started, they achieve incredible RPMs.  In any case, I documented the effect on some of the earlier videos on my youtube channel.  The inductor (pickup coil) I used to accelerate the frequency of operation was indeed an aircore inductor... the first was around 150ohms of #26AWG, and the second around 230ohms of #24AWG.  The key is taking advantage of the parasitic capacitive property of the coil to delay the creation of the "cogging" field in the pickup coil.  This creates a phase shifting of the temporal relationship between the rotor pole passing the inductor and the cogging field by temporarily storing the induced energy from the rotor electrostatically on the surface of the wire, instead of allowing current to flow to load immediately.  This delay is long enough for the next pole to rotate into position, and be accelerated by the decaying field as the current finally flows out into the load.

Both Pirate Twinbeard and myself harvested "Lenz Propulsion" spinning neo spheres inside the air cores of Tesla wrapped bifilar output coils. I just posted a video of a 1/2" sphere that was charging it's own power battery this way. Once again we're spinning neo sphere rotors "INSIDE THE AIR CORE'S OF TRUE BIFILAR PICKUP COILS", and accelerating the rotor spheres using "Lenz Delay" with no ferrite core anywhere near the output coils.

[DeepCut]

Excellent !

Hats off to you both

Here's a short video of my baby rotor, now passing 40,000 RPM

All set to make a coil that overspeeds the rotor, just waiting for my plastic to arrive.


All the best,

DC.

[crazycut06]

Excellent !

Hats off to you both

Here's a short video of my baby rotor, now passing 40,000 RPM

All set to make a coil that overspeeds the rotor, just waiting for my plastic to arrive.


All the best,

DC.

Hey DC,
You forgot to paste the link of your video 


Sound scary thou, thinkin the neo might explode with that 40k rpm, cool! 
Regards
Cc

[DeepCut]

Doh!

Sorry about that

https://www.youtube.com/watch?v=LKTRu9Q659U


Cheers crazy,

DC.

[synchro1]

Alphcentauro, 300,000 r.p.m 400vpp output at 5000 Hz He's levitating a tiny diametric neo cylinder inside the Tesla bifilar pickup coil:


https://www.youtube.com/watch?v=V1oFzXOZnE8