Kapanadze Cousin - DALLY FREE ENERGY

[Dog-One]

P.S> What struck there was like you have 3 layers of wire on the edge then continuing with just single layer over coax cable.

So that becomes the three-plate capacitor.  Ah hah!

See, now we are getting down to brass tacks here.  Once the principal is fully isolated and understood, one can make any derivative of it and have a working device.

I am surprised Akula is willing
to give information on this setup, as I thought Akula had stopped giving out much details on his
devices a long time ago, since he apparently wanted to market his devices commercially.

...

If ever there was a time for Kapanadze to step forward and make a real effort to
start getting his devices into full R&D and eventually production by coming to a deal with some government or corporate interest,
now may be his last chance. It seems to me the secret behind his devices may be very close to coming out in the general public.

If these guys haven't figured out by now that they are being strung along like puppets, no one can help them.  They need to "turn states evidence" and help us get this technology on the loose.

[Hoppy]

So that becomes the three-plate capacitor.  Ah hah!

See, now we are getting down to brass tacks here.  Once the principal is fully isolated and understood, one can make any derivative of it and have a working device.


If these guys haven't figured out by now that they are being strung along like puppets, no one can help them.  They need to "turn states evidence" and help us get this technology on the loose.

Another possible clue is that the Kapanadze blue coil cable appears not to be co-axial. It has two thin bare copper conductors spaced apart in an overall plastic insulation. There should be a reasonable amount of capacitance over the full length of the coil.

[Void]

If these guys haven't figured out by now that they are being strung along like puppets, no one can help them. 
They need to "turn states evidence" and help us get this technology on the loose.

Hi Dog-One. I don't know that Akula is being strung along, but it never hurts for a person to keep their eyes open
and be very careful when it comes to business arrangements.   At any rate, I think we actually have all the
main pieces of the puzzle already to get this device to work. It is just a matter of some persistence now
in working out the finer details. Assuming these devices are not just fakes, which I think there is a reasonable
possibility they are not fake. I continue to experiment. 

[Void]

Hey guys. Just curious. When I try to look up the current status of Kapanadze's patent applications,
I can't tell what the current status of the two patent applications are. The two patent applications
just seem to have gone dormant since about 2009, or at least there does not seem to have been any further
updates since about 2009. How can you tell for certain if a patent application has been abandoned or denied/accepted?
It seems to me there should have been some official update to the status of these patent applications since 2009, but I can't
seem to find any indication of what the official status is at this point...
https://patentscope.wipo.int/search/en/detail.jsf?docId=WO2008103129&recNum=1&maxRec=&office=&prevFilter=&sortOption=&queryString=&tab=PCT+Biblio
https://patentscope.wipo.int/search/en/detail.jsf?docId=WO2008103130&recNum=1&maxRec=&office=&prevFilter=&sortOption=&queryString=&tab=PCT+Biblio

[itsu]

I build the verpies loss-less clamp circuit and after some initial problems, it works rather well.

I used the same MOSFET module which was driving the normal yoke setup, and added an interface to the 12 turn double layer primaries.
No 28 turn secondary installed yet, just the 3 turn to link with the wima cap/inductor series LC.
The Grenade has the 40W bulb connected to check for resonance.

I rewound the Grenade to be ALL layers in the same direction.
No difference is seen up till now.

I do not yet use the MOSFET drivers pin 3 (enable) protection, instead these pin 3's are hardwired to its Vdd (12V).

Screenshot shows the resonance situation.
Yellow MOSFET 1 drain voltage
Blue MOSFET 1 gate voltage
Green MOSFET 1 drain current
Purple MOSFET 2 drain voltage

Video here:  https://www.youtube.com/watch?v=LoSwOlOpU3Y


Regards Itsu