Kapanadze Cousin - DALLY FREE ENERGY

[NickZ]

   T-1000:
   Thanks for asking. I think that I'm stumped by the 3 turn coil on the yoke, as the 12 and 12 turns (red wire) on my yoke gets over 1000v input from single transistor pulse circuit, but, what comes out of the yoke's step down 3 turn coil ends is practically nothing. There should be an increase in current while this down stepping is happening, but, I'm not getting much past the yoke.  I still don't have any big ac caps to play with. Maybe the small ceramic ac caps would work to help tune, like the little blue caps that are shown in that picture of the unknown device that we've seen no diagram of, either. 

You got to admit that the newest Akula build (below)  looks hot. And I'm hoping that it works, as shown.

  I've also been spending some time trying to understand the choke.  From looking at what Herdershot did with his inner coil (or choke) that is inside of the two big basket weave air coils.   He made a coil that is wound on top of an aluminum capacitor, and then, connected both wire ends of that coil to the cap that's it's wound on, then in parallel going onto a transformer, that's located outside of the big air coil.  Coil, cap, and transformer, in one circuit.  That's what he did, as far as I can see, but that is not how I have it.
My air coil is earth grounded on the bottom end, and at the top goes to the bulb(s), then I don´t know where it´s supposed to go, so I take it back to earth ground. 
  The 3 turn coil is hogging power, to the rest of the circuit, like a choke. That is where I'm hung on. So,  I've been trying a few things today on the circuit.
  I suspect that the inner choke design is the first thing that got changed on Akula's newest build, as I don't see anything that looks like a choke inside the aircore pvc pipe, on the newest video. So, it looks like no choke on the last version, at least not inside the former pipe.
  I'm also giving more input voltage with higher current, to the center tap of the yoke, as it may take a bit of power to get it going and resonating, especially with the 3 turn coil at the yoke, bottle necking the whole system. I'm still looking for the anomaly though, not just normal induction. 
I may try to apply 30 to 110v Ac to the yoke, to see what it does.  I'm listening for that hum and vibration, that tell mes when the thing kicks in.  A neon sign transformer would be nice to have,also.
There are many things to try, but I want to stay as close as possible to Akula's  "no battery no ground", (1st video), and focus on that build, for now.
 

[T-1000]

   T-1000:
   Thanks for asking. I think that I'm stumped by the 3 turn coil on the yoke, as the 12 and 12 turns (red wire) on my yoke gets over 1000v input from single transistor pulse circuit, but, what comes out of the yoke's step down 3 turn coil ends is practically nothing. There should be an increase in current while this down stepping is happening, but, I'm not getting much past the yoke.  I still don't have any big ac caps to play with. Maybe the small ceramic ac caps would work to help tune, like the little blue caps that are shown in that picture of the unknown device that we've seen no diagram of, either. 

Right, it looks like there are several things to solve in your side so it is better try to solve that on call. Just drop me PM with your skype name so we can talk live about this.
In meantime you most likely got no capacitor in paralel on primary of yoke as you are getting high voltage on transistors.
To start with you need resonance in paralel on primary of yoke then you will have enough of current over time for transformer action in yoke.

Cheers!

[NickZ]

    I have over 1000v pulsed Ac coming into the center tap of the opposite wound 12 turn coils on the yoke.
Maybe you can explain what you mean by resonance in parallel, in my case. Are you talking about making the 12 turn coil resonate with the 3 turn coil, using a capacitor?    Clear picture of my set up (below).
  I don't have Spype,  I use Voxer (walki-talki)on my Galaxy phone, from their free apps.

  I would prefer to continue on the thread as this way others can also benefit. Grumage may also want to participate, and others as well, like Hoppy, perhaps. If he's not too busy looking for who knows what, and Verpies, if not too busy with other things.
  I would like to focus on the Akula 0083 type device, for now, here on this thread.
   Any help is appreciated.

[NickZ]

  @ Cepren B.
     Most of what you have just mentioned at our cousin thread, can also be seen and verified in the movie below.
THRIVE: Foster Gamble (full free movie).      I like the word and connotation - FREE.
             http://www.youtube.com/watch?v=lEV5AFFcZ-s&feature=youtu.be

  For those that don't believe Cepren B, just watch the movie. Or, if you've seen it, watch it again, as we are programed to forget. So,  Re-member!!!

  What do UFOs have to do with FREE ENERGY and the rest of it?  EVERYTHING! As they have the key that we need, while we are stumbling in the dark, trying to light our bulbs. Blind man following the blind man.
   If socio-political information is not your bag, like with Verpies, then skip the first third of the movie. If you already know all about it, then skip right to the chase.

[MenofFather]

One woman, saying, that she have at home free energy generator, she say, that need on tesla coil wound other coils of 300 windings. And made (I say how I understand and not use complicaded things) one it with capasitor parallel LC contur, then it osciliates on it self osciliations. Let say 2,5 kiloherc - it is it self osciliatins, maybe you can use ZVS driver, because it seems use automatic resonance or with generator find frenquency on what self oscilating this LC contur of 300 turns? let say with 12-48 volts put tu mosfets and mosfet pusch with 30 precents let say duty cycle LC contur to not let it stop oscilating after some time. Then need inductor like in tesla coil, and with this inductor let say of 12-300 volts puts very short impuses, She say, that this increase curent. And use free energy maybe from one more windings let say 100-200 turns, or from 300 turns windings conect load to it ends. And on load-output must be more energy than input, that I understand. She also say what if conect ground (I asume to one end of coil who have many windings like in tesla coil, let say 1000 windings), then this increase curent. She not want show photo, that we not try replicate exatly, but understand principe. I say that she not enouth information give, but if you want, you can try replicate. So I say that this is looks similiary to Dally divice, then on 1-2 kiloherc frenqency is going 1000 volts very short pulses.