Kapanadze Cousin - DALLY FREE ENERGY

[GeoFusion]

TinselKoala:

hmm, I really wish not to be rude but where does that negativity, ignorance, come from? Do you understand the schematics??
I just know and saw many of your vids on youtube and you have awesome Tesla Coils.
So you must somehow understand what is going on with the circuits.
or are you afraid something bad happens to us.
Would be nice if you could also share some positive thoughts to see and analyze the schematics and circuits.

Btw who is elecar  , gurangax ??
Or is it because I haven't shown nothing yet as pics or video such that makes you go like that?   tell me.

[dllabarre]

Nick:

No problem man , yes these are the schematics we need to work on and understand And get self running devices ready to use.
But, won't be easy when tuning.
Uh I never tried a other HV pulsing circuit on the RMG befor, but it could be done, see what it could possibly do. you never know (=.
But one thing I can say is that When the RMG is working, The output voltage drops every time you connect more load to it.
It still has a potential to light up 1.5 to 2Kw power like that but unstable and output was last seen on 23~24Khz HV oscillations.

When working with frequencies on the yokes and flyback pieces, you hear them sing, when they are to be tuned by different frequencies.
You will somehow hear a very high pitched sound from the yoke but depending the driving frequency too.
The higher the frequency the less you will hear of tones. Is what I have experienced my self.


Well We are dealing with Radio frequency waves, Scalar waves for sure since  it's all Tesla tech with Tesla coils, Gravitational well in a way see it as a pulsed toroidal field.
Remember that these particular pulsed mosfet circuits can be used to operate tesla coils to on high power without spark gaps.

Thank you

[dllabarre]

Hi guyz .
good day to you all.

   Nick:
Alright , you could try anything but be careful, you might blow up some components,
but it could be also the case that it could work so it's all experimental.
Yeah, you could try the flattened copper tubing too.
But mines is a 1.5mmsquar wire or 2.5mmsqaur for the kacher a like circuit.

Nick try to build the Schematic !, If you can and willing go for it, it's an opportunity that is givin here so anyone willing could replicate it.
Try to build the Sqaur wave induction Mosfet pulser. But be carefull if you do.
Yes the yoke needs the two gaps  insulated and  alright has been changed.


   Acca:
Welcome aboard the journey,
Thank for the videos and pictures are super interesting and new video of Ruslan and his device .
you can see now he is powering If i'm right 2.3kw of power in total with it.

I also have that particular schematic too.
But the schematic is a bit more complicated with the Nanosecond pulser circuit. The circuit is being fed 150Vdc+ to pulse from a Coaxial cable inside.

Great video of leader jane channel, he also has a nanosecond impulse system there with Fets or IGBT's.
as you can see the power is great! and .


magpwr:
thank you for the specs and pic and Vidoes provided on  LC resonance . In the video the guy is using a nanosecond generator pulser which is what we need to work on to and who is willing to work on it. 
Yes you will need some measuring equipments to move forward in development of these devices but You could without but only than it's pure luck making it work too.


   Wesley:
Thank you for the translations once again, really helps !


   to all:
We work together to share and point out to what we should be focusing on,
One consciousness, work together as the ppl of planet earth.
Take time to study the Schematics I posted, I will provide small ones soon.

Cheerz~

Thank you

[dllabarre]

Hi Guyz

   Nick:
There is nothing to be confused about here man, take a good look at these schematics, try to understand.
the circuits you see in the schematic are very essential to this system. Yes Heterodyning is used here, Radio signals.
You need to make the Circuit  "beat" like a heart is beating.
Example.  Just like a Motor generator have pulsed rotor that keeps the voltage constant.

You need this to work and tune it correctly, you will need measuring equipment to measure the outputs and what input the circuitry needs to stay alive. and you will see you can Self feed it back to the circuits without a battery!

Yes that particular circuit you see in the schematic I have build that circuit and also modified ti too, also have build one that can have more than 120Vdc+.
Just need to try them out without fear, That is how I do, I really don't mind passing thru many circuits as what I have done allot, but this is the reall McCoy ideas.
The primary winds that is connected in the L/C is bifilar and the output windings are bifilar but you could also try out single layer output coils.

   
   Hoppy:
Yes, soon enough I will post some pics and videos as promised but it's best to investigate the circuit and understanding it. But I really don't want to be in the spot light just yet.
But I will slowly show parts that I use within the circuitry.

Btw, it does and can run without a battery,  this circuit setup and the entire device makes sense now why I couldn't get my older experiments to self feed , just as my RMG  circuit. it misses Radio frequency pulses, beating heart. A pulse.
it also has a ground connection too.

   Jeg:
yes It somehow does, but the 2.2nF cap is to the part of protection of the circuit called a " Snubber".
the Zeners faced eachother If I'm correct that is a Overvoltage protection.
And no, 190khz is not there. that can be around the kacher part.  but the part of the circuit with TL494 is where you must be tuning in between 15- 17-27- 37- 50Khz in the range. for the L/C resonance. Depends your coils and  cap for the frequency.


Thanks for the help Meno .

For the schematic:
The Choke is around 47-100uH is what I used.
You also have at the mosfets, Overvoltage protection, and a snubber, They are essential, thinking when tuning it with capacitor for the L/C resonance.

Thank you

[dllabarre]

The TL494 outputs square wave. For push-pull circuit to get sine wave you need capacitor across entire primary coil (also it has to handle high amperage and voltage) and adjust to same resonant frequency as another capacitor in series to the output transformer.
The rest of circuit is induction heater part with single function - to create maxed magnetic field on output transformer primary. The output canceling bifilar coils are in series need to be similar to http://realstrannik.ru/media/kunena/attachments/630/aquarium-1.gif ( http://realstrannik.ru/media/kunena/attachments/630/aquarium-2.png ) then the load does not affect primary so much...

Good luck in experiment, hopefully you will try and see yourself

P.S> If you manage to make it and tune to resonances, the next step is to add Tesla coil influennce into play for interrupting magnetic field on output transformer primary...

Cheers!

Thank you