Kapanadze Cousin - DALLY FREE ENERGY

[NickZ]

  If Nelson won't disclose the complete details on just how to make his circuit self run, I'm afraid the we'll just have to continue with what we were doing, the Ruslan device replication, as before.
 
   The fact that Nelson's previous oscillator can light small bulbs, or light the neon just off of the stray capacitive link from the grid AC to the house, is nothing new, or very exciting. As I mentioned, he should turn off the house breakers, to see just where that input is coming from, as I have done, to confirm the source, as well as the ground connection to the signal generator, refrigerator, etz...
  If the feed back path is isolated from the input by the use of a mechanical relay, as mentioned by some, the question is how long it will hold up, when using higher amperage bulbs, motors, etz...
   So, before I try to build something that is not finished, incomplete, and missing key items or information, I would rather wait and see what else will develop, first. Or, perhaps Nelson will give us more to go on...

   My new 120v-220v to 24v, 10 amp DC power supply has been delivered to me now. So, I can continue with the 24v inputs, to both Kacher as well as the induction circuit oscillator.  This new PS has an adjustable 24v, 36v, 48v outputs, but no instructions as to how to connect it up. Any help with that would be appreciated. I can upload a picture of it, it that would help.

[nelsonrochaa]

Hi Nelson,

You keep calling me Woop when I'm Hoop. You got the wrong man. 

I'm more than happy to build and study the operation of your circuit to observe the 'effect' but only if its exactly the same circuit as demonstrated in your video, which it clearly was not, for the reasons I have given.

Sorry , i made the correction about your name sorry.
what video are you talking ? i show two similar assembled circuits but basically are same thing  .
https://www.youtube.com/watch?v=3S4lCUvzn0E and https://www.youtube.com/watch?v=bY3Mr2pAErw

The circuit can have some little mods but the reason is because i'm everytime improve the circuits and i not draw circuits every time i make a update . But basically is the same .
Normally I do not design schematics , and that schematic i only draw to sent to a friend in USA if he are now watch this topic he knows that is true.

I simple share without ask for nothing Hoppy, but for some people never will be enough .
I'm your youtube subscriber at much time , " this is hoppy speaking ..." and i like see  all you work and tests,
but seems you are like a "cover" singer that just sing maded songs . No offense
With your know how why you do not simple try to design by your own a circuit to traduce your ideas about a subject  without wait only to replicate circuits minded by other author ?

It is what i make ! I Translate my ideas to real things  and i not complain about anyone circuit details because i able to make my own interpretation and make my own designs.

I will repeat what i told to Nick and is the cause of all this :

1-Ruslan use the  "grenade coil"   and i told them that is not need be that style of coil. Can be designed with other coils configurations .
Ever coil have their own resonance harmony stage when is excited , so for me is more important at current stage know a away of make a circuit that make more easy the tune process to achieve this point, and it possible with any coil more easy .
After that , we can study the type of coil configuration it will be more convenient to use based in their characteristics like bifilar configuration , solenoids coils or others to achieve the desired result .

2- Did people learn much with Ruslan videos ? Honestly i think not . Because is almost impossible learn about a work that is not finished . Ruslan understand the ideia ! so do way . But the difficulty is apply that conceptuals ideas in practice, so it's need to test with several configurations like Ruslan or Akula did.  I will do the same almost time .  i only start see now some dim light in end of tunnel ...

3- I share the information that i think is need to make people think with another perspective about this subject .
Thomas Bearden have a valid information and work with some of best researchers of all time like sweet flood .
This information is only valid if we are prepare to receive them . Sometimes i have so much difficulty to express my satisfaction for i rewarded for my persistence and work and be able to understand and see importance in some things where the others simple see nothing .

I hope that you understand the real value of my discourse and not take with any type of offense because i say and repeat , you make a good and valid research work and i appreciate that and i'm grateful for what you share .

i wish you a good luck

Nelson Rocha

     

[NickZ]

  Nelson:
  As far as I know Bearden's theory of operation has not been confirmed by a working third party replication of that type of device.
  Although I happen to agree this Bearden's theory, concerning just where the extra energy is coming from, but, a working device that provides proof of such a theory has not been made, nor shown, yet, at least as far as I've heard.

  I will continue on with the yoke/grenade set up, as it takes me forever just to get up to speed on this, and obtain all the needed parts for it.
  My scope will be delivered to my on Aug. 13th.  I hope.  As of now, I'm without even my multi-meters, as all of them have been fried by HV, and will only work when it they want to.

  Nelson, maybe you should also build up a yoke/grenade system and attach your special oscillators to them, instead.
The result may surprise you. And, it would possibly help to reach a higher output, than what you currently have at this time.
As the output's current limitation, may be related to the size of your small induction coils.

[magpwr]

  Nelson:
  As far as I know Bearden's theory of operation has not been confirmed by a working third party replication of that type of device.
  Although I happen to agree this Bearden's theory, concerning just where the extra energy is coming from, but, a working device that provides proof of such a theory has not been made, nor shown, yet, at least as far as I've heard.

  I will continue on with the yoke/grenade set up, as it takes me forever just to get up to speed on this, and obtain all the needed parts for it.
  My scope will be delivered to my on Aug. 13th.  I hope.  As of now, I'm without even my multi-meters, as all of them have been fried by HV, and will only work when it they want to.

  Nelson, maybe you should also build up a yoke/grenade system and attach your special oscillators to them, instead.
The result may surprise you. And, it would possibly help to reach a higher output, than what you currently have at this time.
As the output's current limitation, may be related to the size of your small induction coils.

Hi Nickz,


If you cherish your future scope you will also need a HV probe as well.

But without HV probe would do but without contacts made.Placing standard probe nearby that is as good as it gets.

Standard free probe are typically rated for around 300volts maybe 600volts.

[Hoppy]

Sorry , i made the correction about your name sorry.
what video are you talking ? i show two similar assembled circuits but basically are same thing  .
https://www.youtube.com/watch?v=3S4lCUvzn0E and https://www.youtube.com/watch?v=bY3Mr2pAErw
   

Nelson,

I refer to this video below which shows an output labelled 'load' that does not appear on the circuit you posted.

"Nick ,
analyse this video , is the exciter of circuit diagram that i share , is more easy to see  and compare with diagram .
https://www.youtube.com/watch?v=bY3Mr2pAErw"

You are confusing me with another person, as I do not have a video channel.