Kapanadze Cousin - DALLY FREE ENERGY

[Enjoykin]

Magpwr - He got a power from "Grenade" coil (Ruslan terminology) and Earth not from that small capacitor.

I do know very well all type of markings and conversions of electronic components and formulas.

Analyse this Anapa man picture with great attention. It show DC output of 176Veff on D1 and D2 anodes. This volatge was than filtered with 10uF/630V bipolar type capacitor without Line-Choke as is in mikmur schematic Tr14. Watch on waveform on catodes of diodes. It is "cutted" sinusoid with frequency of 33Khz. Anapa man push-pull half-bridge oscillator work on that frequency. He was shown a self runner  His Inverter - modified PC power supply work from 176V DC.

His final step is to connect a Tesla transformer or Katcher circuit and get 3-4 KWatts of Free Energy out of his system and watch TV or computer in long winter evenings in nice hot and comfortable living room. 

He was changed all input and output diodes in his PC power supply (based on TL494), all electolitic capacitors to HV rate (400V-600V) and made filters and chokes on both input and output. He has also changed switching transistors for much higher voltage and current. And as we can see it work fine.

Quote: "
Эксперимент №2
Подключил Инвертор 220 – 14,5 V переделанный из БП от компа, (на TL494) Кто будет делать, то не забудьте поменять входные диоды, на высокочастотные, и фильтры входящие нафиг!!! закольцевал схему, запарился настраивать, но единственное огромный плюс этого БП в том что он начинает работать от 176 вольт."

Reg.

[magpwr]

magpwr - He got a power from "Grenade" coil (Ruslan terminology) and Earth not from that small capacitor.

I do know very well all type of markings and conversions of electronic components and formulas.

Analyse this Anapa man picture with great attention. It show DC output of 176Veff on D1 and D2 anodes. This volatge was than filtered with 10uF/630V bipolar type capacitor without Line-Choke as is in mikmur schematic Tr14. Watch on waveform on catodes of diodes. It is "cutted" sinusoid with frequency of 33Khz. Anapa man push-pull half-bridge oscillator work on that frequency. He was shown a self runner  His Inverted - modified PC power supply work which from 176V DC.

His final step is to connect a Tesla transformer or Katcher circuit and get 3-4 KWatts of Free Energy out of his system and watch TV or computer in long winter evenings in nice hot and comfortable living room. 

He was changed all input and output diodes in his PC power supply (based on TL494), all electolitic capacitors to HV rate (400V-600V) and made filters and chokes on both input and output. He has also changed switching transistors for much higher voltage and current. And as we can see it work fine.

Reg.

Quote: "
Эксперимент №2
Подключил Инвертор 220 – 14,5 V переделанный из БП от компа, (на TL494) Кто будет делать, то не забудьте поменять входные диоды, на высокочастотные, и фильтры входящие нафиг!!! закольцевал схему, запарился настраивать, но единственное огромный плюс этого БП в том что он начинает работать от 176 вольт."

hi Enjoykin,


May i ask do you have any youtube video of your own which you can show us "any electronics circuit video" which you have created in the past.Thanks.

I prefer to speak to someone i know whom got some level of creditbility and i can tell just by looking at the youtube video to determine your estimated level of experience.
"I am just being very straight and honest that's all"

[Enjoykin]

Straight and honest - I don't have youtube channel not facebook or twitter channel. 

Maybe it seems a little strange but i also have prefer to speak with someone which i know and have great level of creditbility in "my eays". Honestly the first one on my list is Great Nikola Tesla, than Edwin Gray, and many more great and respectable in " my eays" inventors but it's currently impossible to make contacts with them on present "high" technology level today. 

Reg.

[d3x0r]

Straight and honest - I don't have youtube channel not facebook or twitter channel. 

Maybe it seems a little strange but i also have prefer to speak with someone which i know and have great level of creditbility in "my eays". Honestly the first one on my list is Great Nikola Tesla, than Edwin Gray, and many more great and respectable in " my eays" inventors but it's currently impossible to make contacts with them on present "high" technology level today. 

Reg.

should be ...

[/font]but it's currently impossible to make contacts with them today. Reg.

[/font]




but ya, with a post count of 6?  you need a resume before anything can be more than glanced at.
.... but this isn't the place to discuss that... but you piqued enough interest that someone asked you for more so maybe it is for a moment

[Hoppy]

hi itsu,

I am a little lost on why you wish to with the circuit diagram which i mentioned many times over it is intentionally made flawed.

I have attached once more the Ruslan version which is similar to my version 6.2 of the nanopulser.Just the additional 1n4148 at the igbt driver input to prevent noise for ver 6.2.

I will attach my Nanopulser version 6.2 and version 7(5k pot->2k pot to be changed) for the last time."Please save it".

---------------------------------
I have also attached igbt driver models review and pasted the delays which comes with it.(This is just additional info not part of device.More relevant for nanosecond driver stage)
TC4420 was used in Ruslan circuit as a guide.

Mag,

Have you decided how to interface the nanopulser toroidal coil to the Karcher primary in versions 6.2 and 7.0?