Kapanadze Cousin - DALLY FREE ENERGY

[MenofFather]

@ Itsu

Basicaly as I've understand there are two main frequencies:

1. Grenade natural freq must match kacher freq.
2. Series resonant circuitry = F grenade / 50. Push-pull driver must drive yoke on this freq.

PS. With 3 layer inductor, coil assembly look too bulky than what I see in all Ruslan's videos. I'm convinced Ruslan use just 2 layers (Tesla mode), and  18.5m for inductor is obvious not true, maybe 1/4 from grenade length, but not 1/2.

Ruslan use on inductor about 11 meters. He only to others recomendate use 18 meters. 

[skywalker66]

Ruslan use on inductor about 11 meters. He only to others recomendate use 18 meters. 

Now we are in business !  11meters may fit in 2 layers as can see in videos. Thanks for that.

[skywalker66]

Hi Jeg !

Yes in deed, a big pain in the ass ! But it may not be so big after all.

Itsu scanned his grenade with  inductor left free. Its (free coil, line) equivalent circuit is an LC parallel, which at resonance have big impedance, but big internal current which induce upon grenade. In schematic setup there are a 0.47uf or such in series with inductor which kill high frequency free oscillation of inductor, and force resonance of inductor to lower freq (34KHz let say) depending of external capacitor value which is much bigger than internal interturn capacitance. 
For finding final correct resonant freq of grenade, inductor must not left free oscillate, but short circuited (or put a 0.47uf or such across it) , and put to ground, thus you are free from its influence in scanning for grenade frequency.

It's also possible to have match free oscillating freq of grenade with free oscillating freq of inductor, and after that with kacher, and so on, then god help us if that is the case.

I hope I managed express my self correctly in this mater.
Regards.

[itsu]

Ruslan use on inductor about 11 meters. He only to others recomendate use 18 meters. 

11m he, could it be somewhat more,  like 12.5m as it would be 1/3 of the grenade wire length (37.5m)

This 12.5m will fit nicely as 2 layers.

Regards Itsu

[skywalker66]

11m he, could it be somewhat more,  like 12.5m as it would be 1/3 of the grenade wire length (37.5m)

This 12.5m will fit nicely as 2 layers.

Regards Itsu

I have a hunch that inductors length is not mater at all, even inductor itself is not so important across grenade, can be made separately, but please don't tell anyone, people do not like that, they get nervous if inductor haven't exactly 18.5m