Kapanadze Cousin - DALLY FREE ENERGY

[lost_bro]

Hi,

I had conversation with Oleg (who made circuits for Ruslan) yesterday and he shared some links to forum (pass through Google translate):
http://realstrannik.com/forum/dosae-initiative/228-foreigner-skhemy-2-2.html
http://realstrannik.com/forum/ustanovka-kulabukhova/213-skhemy.html?start=108#9074

His nickname in that forum is Foreigner, you can ignore other people there.

Also here is offline copy of his circuits and PCBs:
http://filebin.net/84mauc7noc/Kapanadze_replica_-_Ruslan.zip

Hopefully that helps with electronics part.

Cheers!

Good day T-1000

Thanks a million for the Ruslan/Allega file.....
This Allega character looks like he has some experience with SMPS design/ layout.
Not sure how many experimenters here have experience with PLL design and all the fun *details* involved but least to say that entire volumes books and university classes are dedicated to it....... poles, zeros,negative feedback loops, etc.
Needless to say that SMPS design is another art unto itself, let alone XRFMR design!  (many engineers dedicate their entire professional career  to SMPS) and it seems like this Allega character has design expertise in both fields.

I like the fact that his designs have a simple, straight forward layout ..... ground planes included.
Without proper board layout and design, these circuits will *not* perform according to plan.  No breadboard monsters here....

I am not really surprised that no-one has been able to duplicate what Ruslan has presented so far, especially that it is not his own work and because he has a *professional* designing/fabricating some interesting and detailed prototypes.

I would think the most reliable manner to experiment with these circuits would be to reproduce some of the pcb designs contained in the Zip file.  With the boards produced and populated, one could then dedicate time to experiment with the coil winding, types of toroidal material used, etc.   

From my experience with SMPS, depending on the inverter topology, (inductor or transformer) you must select the core material first according to your design parameters ( D/C, Frequency, eddie losses, hysteresis losses (core losses), copper losses (I2*R),  power conversion efficiency, size/weight considerations, output/input voltages, costs, etc) which all go hand in hand with the  core material's power handling capabilities, operational quadrants, flux density, winding ratios, window utilization, inductance, wire gauges, etc. ....... Actually, only to wind a decent *coil* is an Art unto itself, definitely not about just guessing.  Sorry for restating the obvious.

Basically what I am saying is that we are missing some *critical* information as to the core material used on the push-pull inverter.
The green feedback toroidal (in one of the photos from zip file) core looks like a high frequency common mode choke core.

I for one am interested in the replication of some of the included pcb designs.... from experience I would assume * a lot* of  hard work went into those prototype designs.

take care, peace
lost_bro

[Bat1Robin2]

https://youtu.be/NVUc8pPjcaU

https://youtu.be/9yOgAVN4B5M

In the second video the red meter is not accurate i  switched it over to fluke for a more accurate measurements. so ignore its over reading the amp is really lower.
Second video : notice the spike of the tesla coil shuts off the yoke drive fet, which by the way will allow the bemf of the yoke to assist the tesla drive.
This is part of the design i did not plan this, this is part of how the yoke power is being reduced during tesla drive. Honestly im lucky i stumbled onto this because i noticed adding 2 large caps on the 24 volt supply will stop the unit and not light any bulbs.

Nick,
The goal is to follow the resonance up the line of efficiency 70, 80, 90 % then achieve overunity.
I have followed the schematic exactly and see the bulbs lighting and how the tesla assists the output.
Im telling you this thing is 70% efficient as shown on schematic, i have an excellent ground i assure you, i have switched to battery drive still same results. Adjusted capacitor up and down following the most efficient path and even tho my caps are slightly off from original design. I spent over 3 days 8 hours per day switching caps and adjusting top loads, playing with frequency and centering of pulse all roads lead to lower efficiency. At this point the only serious power i can still harvest is from the Bemf R26 which is only 7 watt.  It might bring me to 80% but wont help alot.

Let me show you a couple pictures from the ruslan videos which by the way i have watched all that i can find probably around 5 times each in detail.
Please remember i am not being skeptical but and I want this thing to work. i have seen first hand every single piece that goes into this device and tool needed to assemble it. Those pieces do not belong in those locations. Also why does he bother putting these circuits into boxes, does anyone ever wonder that. Then the video labeled open internals we only get a tiny peak into the second box. Just seems suspicious to me. i hope im wrong but look at the pictures. I can easily run this on my drill battery pack and stick it in a box. scale up my fets and throw in a drone battery and i will have an exact replica video.

Anyone have open boxs video with unit running?

[Bat1Robin2]

Ar 109??

[Hoppy]

Let me show you a couple pictures from the ruslan videos which by the way i have watched all that i can find probably around 5 times each in detail.
Please remember i am not being skeptical but and I want this thing to work. i have seen first hand every single piece that goes into this device and tool needed to assemble it. Those pieces do not belong in those locations. Also why does he bother putting these circuits into boxes, does anyone ever wonder that. Then the video labeled open internals we only get a tiny peak into the second box. Just seems suspicious to me. i hope im wrong but look at the pictures. I can easily run this on my drill battery pack and stick it in a box. scale up my fets and throw in a drone battery and i will have an exact replica video.

Anyone have open boxs video with unit running?

You are catching on fast! 

[NickZ]

  Ruslan originally put the drivers crt, caps, and connections into the boxes, to replicate as best as he could the Akula second video devices. There are videos that show all that is in those boxes, but each device is different.  In the next video you may not see what may look like a battery to you. His self running devices show an input reading of 10+ amps from it's own feed-back loop.
  Would he be showing that image of the box, and let you see what's in the box, if he were really trying to hide a secret battery?
I don't think so.

  Any way, those that have decided that this particular devices is a fake, are free to do so, but, I'll continue on, even as discouraging as it may seam, at times.  Until that AH Ha!  moment comes.  And,  it will...