Kapanadze Cousin - DALLY FREE ENERGY

[Belfior]

   Belfior:  Welcome.
   I can see that you were finally able to post. Good.

   I would start by building a kacher circuit first, and then to wind up the grenade coils. 
   After that, build the TL494 circuit, or buy one from Ebay ready made, for a few dollars.
   Cepren Stalker has one of the simplest TL494 circuit, shown on his last videos, that may be a good one to start with, and to replicate.

   There is no magic to be found in just the Kacher, or the TL494 circuits by themselves. The magic is found by heterodyning their combined interactions. And that is the main trick of these types of circuits.

   It's great that you can afford a new scope.
   Good luck.
                      NickZ

Yes admins were busy so had to wait some time to finally get here.

This scope was something that a polytechnic school abandoned to be replaced with digital ones. I think it is from the 80's. So "new scope" it is not, but for 50€ I think it is a good investment.

If you could fast forward me to the current progress? Kacher and TL494 were used to make these circuits work? This was confirmed by whom? Since Tesla did not have any of these, the principle would have to be simpler?

I'm not trying to a be a dick here. I am just merely trying to understand this. If this process works it has been there since the beginning of time, so howe come you need Kacher, TL494 and parts from an old Russian TV to get it work?

Think Ruslan said Akula was just lucky to get it to work, so is the principle still a total mystery? Everybody is trying to get the circuitry to work first, so they can study the actual principle?

[apecore]

Everybody is trying to get the circuitry to work first, so they can study the actual principle?

Hi Belfior,

Interesting statement,.....  and i must say you are mostly 100% correct.
Could we be all are searching for the unreachable??

But also each functional system should be explainable by logic physics, even Tesla theorie is part of that.
That means it is replicable

Since you've bin talking about Tesla and the ground current, what would be your approach?

Who knows what inspiration or mind blowing effort one different approach could do.


Best regards,

Apecore

[Belfior]

Hi Belfior,

Interesting statement,.....  and i must say you are mostly 100% correct.
Could we be all are searching for the unreachable??

But also each functional system should be explainable by logic physics, even Tesla theorie is part of that.
That means it is replicable

Since you've bin talking about Tesla and the ground current, what would be your approach?

Who knows what inspiration or mind blowing effort one different approach could do.


Best regards,

Apecore

I don't think it is unreachable. Thomas Henry Moray invited all willing scientists to look at his apparatus and it worked in the middle of the desert. You don't do that if you are just trying to scam a few bucks. He let them study his whole device minus one part he kept in his pocket and the device ran for days, so it was not a battery. That means the principle is not "illegal" in this universe. If the device works you can toss all "fundamental laws of physics" into the garbage or they need some tuning. I see no real limits anywhere. Limit is a human concept, so we can make sense of things. Limits are something humans have, but in the Universe I see very little of hard set limits.

People are in a hurry to get their names on a new "fundamental law", so they jump to conclusions. I still don't believe our laws of physics are 100% correct. But then again I studied mostly programming and electrical courses I barely passed. What I have observed is that humans think we did not come from this earth and that we are so much better then the rest of life on this planet. We tend to put all the technology between ourselves and this planet to shield us from it. We used to sleep on the ground that resonates in the same wavelength as our brain does when we sleep. So we build concrete buildings to sleep in and then bitch about not getting good sleep. We eat antibiotics and radiate bacteria from vegetables and then moan when our stomach hurts. Babies get allergies and might not be born at all. What do we do? We eat drugs that cannot be naturally found on this planet and that our body has never seen. This is pure insanity to me. We eat medicine for diarrhea, that gives diarrhea and in some cased death. "Eat a banana and drink some water?", "No I can't! There are carbs in that and I will get fat! I will get rubber tits instead!"

It's late and I'm ranting. You can PM me if you want to read all my rants. I will try to summarize my point, if there was any.

Tesla had coils, caps, spark gaps and resistors. Did he have an analog computer or logic ports? Did he have other pulse generators than the spark gap? Can we just send the pulses to the ground connected coil and pick the resonance back with other coil in the grenade? Resonance is the key to any amplification. Akula's bit of coax cable is just a reflector. Akula's looped LC in the middle of the grenade seems to be a correction of other parameters. Like resonance is off, so that gives more impedance or something. That means the other coils are wrong.

But I think this is now a thread hi-jack. I am going to build the circuit with the Kacher and TL494. I would like to see where itsu and NickZ get to. That will also help me out. I will post here if I find anything related to this thread

[NickZ]

   In this thread, we aren't trying to do what Tesla did. Although a Tesla Coil is part of the device. The HV part or it, only.
The word Kacher refers to the type of Tesla coil that was modernized to include a simple oscillator circuit, instead of a spark gap.
As spark gaps can burn out, cause unwanted smelly ozone gas released into the surrounding, etz...
   
   There are no videos or movies in English, or made by Americans (north, central, or south American, showing devices like the ones we are working on. Such the Akula/Ruslan/Dally type of replications, of motionless free energy devices.
   Mostly only in the Russian language are any videos found of these types of contraptions. Solid State generators, with no moving parts, nor spark gaps. Some versions by Ruslan and Stalker and a few others do show some schematics, diagrams, and such.
Anyway, that type of device is what we are working toward on this thread.
 
   If you want to get on the same page, try reading some previous posts, and watching some of the videos of what this thread is all about.
   We are all just experimenting and testing different circuits, to see what works, and what doesn't. Therefore no one here can tell you exactly how to obtain a self running device, such as the ones we are working on now. So for now, we are all just testing things out.

[NickZ]

   Itsu:
   I've been trying to tune my device as best as I can, but there still seams to be some imbalance in the system, somewhere.
I suspect now that although my fets are showing different resistance readings, like one fet is at 118 ohms and the other fets is 138 ohms resistance. That the actual cause of the imbalance may be also be due to the yoke coils, as well as possibly the fets. So, I've got more fets on order. And I'm wiring up a new yoke, also.
  But, just as apecore found out,  he still had problems with his lossless clamp and had to re wire, or re route the coils on his set up. Or the fets would fire at the same time. But, he did get it working now with hardly no fet heating issues, nor even needing fans.  While Jeg still had spikes on his lossless clamp circuit, showing up on the scope. And could not get rid of them,  that I can recall.

   But, Itsu you were able to obtain fairly good results from Verpies design. Right? The problem seamed to be in obtaining the needed interaction with the HV circuit.
  Maybe you can post the schematic of that Verpies Clamp design, again, for me. As I may have to go that route, myself.
  Can I run the lossless clamp from my TL/UC board circuit. Or not?

   As I mentioned, I'm now rewinding a new yoke. Another yoke, with the primary coil 12 and 12 turns also, but opposite to the 28t coil, and the 3t coils. So that the primaries are opposite to the secondary coils on the yoke.
I'll try that out tomorrow, and see what happens.
 
  I'm still into installing whatever snubbers are needed. As my drain spikes and peaks are OUT THERE. Let me know if you need any more close ups of the "ringing", wave forms and such. And let me know if you have any suggestions, or snubber thoughts, and ideas, please.
   Thanks,
                Nick