Kapanadze Cousin - DALLY FREE ENERGY

[AlienGrey]

This place really does need a moderator.

Just as long as it's not you! haven't you already tried that one ?

Stop it Void now!

Hmm does any one remember that guy who was on here trying to get every everyone's identity said his real name was Richards also selling shares in QEnergy generator? well if you were stupid enough to buy them you ended up paying negative equity penny dropped ? and countless other aliases. Don't say i didn't warn you.

Notice the pad lock top left it's not secure.

[NickZ]

   Itsu:
   Here's a short video of my set up now. If I hadn't touched the snubber caps at the end of the video, the device would still be working. But, the peaks and spikes without both snubbers on, was enough to blow one of the two fets.  Test ended there.
So, now I know what can happen without the snubbers on, and mounted properly ...
   Here's the video: https://www.youtube.com/watch?v=S-QHmCrq6DE
 
     I replaced the single burnt out fet, and the device is working again. The caps were just touching the fets, and were not soldered into the board.
    The new fets have not been mounted yet, as this was just a test of the voltage spikes with the full 24v input, and with NO 24v 18w bulb on. And, also testing using 3 200w 130v bulbs on the load, while still using the older junk fets. So, no need to try to take any readings, yet. Unless you want to, of course.
   I'll look for some smaller value snubber caps. Such as a 102, or so, out of my recycled parts bin, if I can find any.
But, I notice that adding the snubbers does not change the light bulbs lumin level output at the bulbs, by much.

  PS.  EDIT.
  Void: This is not the Kapanadze thread. We are working on replicating the Akula/Ruslan/Dally, no spark gap type of devices, instead.
There's already 1500 pages or more, of stuff on the Kapanadze thread about fakes, and possible layouts used on his device.
You should post your comments concerning the TK devices, there. But, NO ONE will replicate TK's devices, because they can't. There's not enough info on them to do so. He made sure of that.
Nor will you end up doing so, either, most likely.

   However, and it's getting to be a big however,  both you and AG are now disrupting this thread. So, please control yourselves. Especially AG, with his insults. Which are NOT allowed here.

[AlienGrey]

 
   However, and it's getting to be a big however,  both you and AG are now disrupting this thread. So, please control yourselves. Especially AG, with his insults. Which are NOT allowed here.

Nick I share your concern but I merely pointed out a certain persons selectivity in their selectivity in fakes to prove a point, and he came back with insults and slanderous remarks concerning my mental health and that means he is a layman illegally practicing to be a psychiatrist, which is illegal and I'm not about to accept that kind of treatment from a person with a cads attitude whom I shared information with to try and help them, you haven't in the past so why should I ? and if you look at his record in posts you will find the same sort of exchange with people on prophets channel which is also and called for and illegal in this country and so is following me on threads and making statements of collective agreement that speaks for you all, I should remind you this is a public thread and not Voids personal data base, as I said this reminds me of the QEG guy.

I think he should creat his own thread for his own road he wants to follow and leve us allown

[Void]

Void: This is not the Kapanadze thread. We are working on replicating the Akula/Ruslan/Dally, no spark gap type of devices, instead.
There's already 1500 pages or more, of stuff on the Kapanadze thread about fakes, and possible layouts used on his device.
You should post your comments concerning the TK devices, there. But, NO ONE will replicate TK's devices, because they can't. There's not enough info on them to do so. He made sure of that.
Nor will you end up doing so, either, most likely.
However, and it's getting to be a big however,  both you and AG are now disrupting this thread. So, please control yourselves. Especially AG, with his insults. Which are NOT allowed here.

Hi Nick. Well, first of all, I have already stated my reasons why I was looking at Kapanadze's 
2004 setup. I think it should be pretty clear that the 2004 bare bones Kapanadze setup is what Daly
most probably based his own device configuration on (inverter driver and high voltage pulser and coils),
and Akula's second self runner appears to be a variation of this same type of approach as well.

Secondly, a person has the right to respond and say something when someone is directing rude
and insulting comments at them for no reason. I was hoping someone might indicate
if there is a way to contact a moderator here when this sort of thing happens, so I don't
think I am 'disrupting' this thread or being off topic in any way. 

This all being the case, I will continue to comment in this thread as I think is appropriate
for this thread. Nick, one might also say that a two year or so build of a very basic PWM controlled inverter
driver circuit is off topic here as well, as such technical details of how to build and improve basic inverter driver circuits
and pulser circuits etc. could easily have gone in another thread to keep this thread on the topic of
Daly's apparent OU setup.    I am not saying that at all however because I know that this thread
has been the general go to thread for any topics related to Kapanadze and apparent similar devices and circuit details, and possible
theories of operation for a very long time now.

It seems at least very possible if not probable to me that the sparkgap in Kapanadze's older devices played
the same role as Daly's HV 'nano' pulser circuit and Akula's pulsed tesla coil circuit, so that is
something really worth pondering I think. My comments are directed at people here who might have an interest
in trying to figure how the Kapanadze/Daly/Akula/Ruslan and possibly other related builds might really work, rather
than just endlessly playing with building and burning out very basic circuits.  If anyone wants to discuss
more about what is common to all the Kapanadze/Daly/Akula/Ruslan devices and how they might really work, do not
let Nick's ongoing off topic posts about building very basic circuits and how to continually keep burning them out
discourage you from discussing the topic of this thread.  (Just ribbing you Nick! The build details of how to build those
basic circuits and improve on them is no doubt useful info for others as well here.) 

P.S. At this point, I have to wonder why anyone who may have some good practical ideas or promising experimental results
on how Kapanadze and related devices might really work would ever even bother to post that info here. A lot of what I see here
is people either just doing their own thing and sharing very little info about their own experimental results, and some people who
get bent out of shape if someone expresses some ideas or approaches that don't fit in with their own personal point of view. 
In others words, I think this thread has pretty much ground to a halt a long time ago. I can say for sure that if I got something really
promising on my workbench at some point, I would have to really wonder why I would post info on it here in this thread, to only have
people jump all over you and/or declare it fake or off topic while at the same time trying to take any info they can
squeeze out of you to go and try to replicate something for them self, and then keep it for them self and try to make a fortune off it.
Realistically, that is most likely what would really happen in most cases I think.  Remember Magpwr? As soon as he thought he had something
promising, he gave everyone here the finger and said he was going off to make his fortune...  

[Hoppy]

I have commented a few times in the past that I do not consider that this thread should specialise on one or two particular topics and I certainly see discussion on Kapanadze devices as being relevant to the Daly device, which this thread was named. Furthermore, there are many, many posts on this thread relating to Kapanadze devices, so I fail to understand why Nick now, after thousands of posts, sees it necessary to change things. Howevewr, it could be argued that basic electronics teach-ins should not be a feature of this thread and would be best covered on a thread dedicated to this. Of course, rudeness should not be tolerated on this thread or any other thread. Long may this thread stay popular through its discussions on a diversity of kapanadze type devices.