Quantum Energy Generator (QEG) Open Sourced (by HopeGirl)

[MileHigh]

Jbignes5:

You are welcome to link to someone doing something useful with a Rodin coil.  Spinning a magnetic ball and making an audio speaker are just parlor tricks.

I can certainly speculate, but I don't make outright lies.  You should be ashamed of yourself for repeatedly making that allegation about me.

You speculate yourself.  People can read threads and get differing opinions.  That is a good thing and I am always concerned about people wasting money on unproven and sometimes ridiculous free energy propositions.  That's just my thing.  I strongly disagree with the laissez faire attitude where people don't care about that.  What do you think the Consumer Reports magazine is all about.  It's to inform people that can't possibly be experts in everything so that they don't buy crappy cars or crappy appliances and instead they can spend their money wisely and get good value.

The electric field inside of a wire is normally incredibly weak because there is no electric field inside an ideal conductor.  A wire is close to an ideal conductor hence the electric field is very weak.

And this is why we have ignored this Electric field for over 100 years.

You are showing the readers how limited your understanding is.  I am sorry, but I must point it out because it explains the backdrop behind your attitude and world view.  You consume "supermarket tabloid trash" about electronics and energy and believe that it is real.  That's not a good position to be in and it results in you giving advice and rendering judgments that are way off the mark.  If you are really leaving, and you are truly interested in this subject matter, then do yourself a favour and educate yourself.  If you just say, "conventional electronics and engineering is all crap that they want to program into you" then you lose big time.

Now resonance is a process of selective openness. This means it has been designed to be more open on one small band. It rejects or filters a good amount of the rest of the band and in this process it amplifies the selected band through resonance.

I suggest that you learn what resonance really is.  Start with a bell ringing.  Why does a bell ring?  What's really happening there?  How do you explain a bell ringing in scientific terms?  Then move on to electrical resonance and you will see that they are one in the same.

Tesla was a very smart man and an electrical pioneer.  But from what I can see there are no hidden Tesla secrets that will free us all.  That is the "Tesla tabloid trash" industry that has taken advantage of his name and exploited him and what he did for their own reasons.  Look  at HopeGirl and her group, they are doing it also.  That may be upsetting to you but it's the truth from my perspective.  There was no free energy Tesla car, there was no magic Tesla shaker that almost destroyed a big building.  The whole era that Tesla lived in was a time when journalism was out of control and the public had not yet wised up and incorporated cynicism into their world view.  In other words, the vast majority of the public believed what they read and newspaper men and others exploited this fact for their own personal gain or to advance an agenda.

There are some facts that we can all agree on.  HopeGirl made definitive statements that the QEG works.  Nobody has verified that the QEG works.  HopeGirl and her entourage are running around the world to allegedly teach people how to make their own QEGs.

Good luck in your future endeavours.

MileHigh

[wattsup]

@gotoluc

About the solenoid, I decided to save hassles and did a quick test myself.
https://www.youtube.com/watch?v=YD-m0ujg88U

Basically there is no effect worth mentioning. I could only pulse the thing up to around 9Hz - hehehe - that was lame but fun to do anyways. I needed a break from my FTPU studies. At least that is coming along well and I have learned  so much with the FTPU.

I could see on the scope some peaks that were pretty good but no output to talk about. Just not fast enough. This would require something with much more speed like a small motor turning a camshaft or an off centered wheel type arrangement and much more precision worksmanship then my hastily made set-up. 

So back to my bench and more FTPUing.

wattsup

PS: Now lets see, an alternator coil and a Rodin coil. Hmmmmmm.

[gotoluc]

@ GOtoluc


Luc ,I want to ask your opinion on your earlier test with the MOT s and the rotating end plates.
If there was no issue with added motor load and slapping of the end plate on the core do you think that it could have generated usable power?


Vince

Hi Vince,

I don't know if you saw test 3 video: https://www.youtube.com/watch?v=R-jYPDuueY0

In this test the cores don't rub at any time since I can control the Resonance by having the bulbs on the high voltage coil. It's clear that as resonance builds, so does the need of more input power to the motor. At a stable Resonant point it was about 10 watts more to the motor then with no resonance. If this device was operating at unity the each bulb would have 5 watts and I know these 40 watt bulbs start to glow at 5 watts. They were not glowing and I estimated about 2 watts to each bulb. My guess is the rest of the power (6 watts) is lost in the 160 Ohm series high voltage coils.

My test device is far from Unity.

Luc

[gotoluc]

@gotoluc

About the solenoid, I decided to save hassles and did a quick test myself.
https://www.youtube.com/watch?v=YD-m0ujg88U

Basically there is no effect worth mentioning. I could only pulse the thing up to around 9Hz - hehehe - that was lame but fun to do anyways. I needed a break from my FTPU studies. At least that is coming along well and I have learned  so much with the FTPU.

I could see on the scope some peaks that were pretty good but no output to talk about. Just not fast enough. This would require something with much more speed like a small motor turning a camshaft or an off centered wheel type arrangement and much more precision worksmanship then my hastily made set-up. 

So back to my bench and more FTPUing.

wattsup

PS: Now lets see, an alternator coil and a Rodin coil. Hmmmmmm.

Thanks wattsup for going the extra mile and doing the test yourself. I kind of knew you wouldn't be able to get a frequency higher than 10Hz with a solenoid. That's why I asked you to test frequency and movement (distance)

Also, to get Resonance you would have to connect the high voltage coil to a capacitor. I would think you would need quite a large AC capacitor with your Inductance and frequency being lower then my test device. My guess the capacitor could be in the 25uf to 35uf range.

I also don't know how much of an Inductance swing you need for it to kick in.

Anyways, thanks for giving it your best shot and taking the time to make a video demo on top of it all.

Excellent job my friend.

Luc

[F_Brown]

Without windings on the rotor there would be very little lenz force on it to slow it down.  Only small eddie currents in the rotor lamination would cause any lenz loading, so the dominant behavior of the motor would be to just drop the output voltage and current rather then slow down due to loading.

I just modeled a tank circuit attempting to simulate the parametric drive of the QEG.  The first thing I found out was that LTSpice refuses to compute a time varying value for an inductor.  So, I ran a steady state sim just to see what happens with the voltages and currents in the tank.  Low and behold I got this, see attached image.

The peak voltage and current that built up with a 15 henry inductor with 50 ohms DC resistance and a 10 nano farad capacitor was about 29kV and the current was about 750mA.  Multiplying these values by 1.414, and then multiplying the results by each other yields an RMS value of about 11kW of recirculating energy in the tank circuit.  I chose the value of 15 henries for the inductance because James said his machine was operating between 10 and 20 henries, and 10 nano-farads for the capacitor because that set the resonant frequency at 411Hz.

In my model I1 is being used to drive the tank circuit, and B1 is being used to add some noise into the circuit.  Since the Inductor has 50 ohms of DC resistance it is dissipating energy.  The cap is also dissipating some energy although I set it's equivalent series resistance at 100 milli-ohms so that dissipation negligible.   

I am sure that the energy dissipated by the inductor is equal to the energy being added to the circuit by the current source driving the circuit, I1.

The value I got for the recirculating energy in my tank sim is so close to what James is claiming as peak output, that I'm getting the impression that James reported the value of the recirculating energy in the tank circuit as dissipated energy in the output load of the circuit.  Perhaps he is thinking of this as "generated energy."  A trained engineer would simply know better than to make that mistake. 

By the way this recirculating energy is what Joseph Newman was showing people.  He would say look, I turn the machine on and in just a few seconds it generates all this energy.  The problem is he failed to ever demonstrate a way to get the energy out of the machine on a continuous basis to do something useful.  It was Senator John Glenn that finally put him on the spot, and showed Newman's claim to be false.