Secret Of Back EMF

[darediamond]

At Resonance, Back E.M.F is SPECIAL.

My coil of 940inches when tuned to it resonant frequency uses maximum of 8W (24V/8W) to generate 560Vdc X 36mA.

[darediamond]

You do not seem to understand Tom at all.

First of all know that there is Electrity in the Air and Earthcrust or Material Ground.
When you energised a coil at High Frequency, you are on your way to Overunity or taping cosmic power.
Now,energise or pulse that coil at it resonance frequency you get more power out than in FOR SURE WHETHER THE COIL IS OF HIGH RESISTANCE OR LOW RESISTANCE.

But the best is to tune an high resistance coil to it Resonance's frequency or better pad the coil so as to enable it to get pulsed at high frequency.

You can further boost the back e.m.f by collecting the power in a Series-Paralled capacitors the exactly matches the Back E.M.F Voltage. That is provided your back emf voltage is 500V, just get 25v 4700uf or 10000uf DC caps and get 40 pieces of High Voltage High Frequency Diodes like HER208 or FR607.
Connect the caps is series with Jump Wire. Thereafter, solder the forward of the diode to the positive terminals of the capacitors in series and solder the backward part of the diodes to the negative points on the serially linked caps.

Now, parrraled the diodes points that are negative
Then parallel the points that positive.

What you have done is to leverage the power in High frequency to amplify the Back emf current. If you connect 20pieces of 10000uf Caps in Parallel, the charging period will be high. But now that you Series the caps to 1000uf at 500V,  it will take low time to get repeatedly charged and recharged.

Your best bet is reduce the capacitance further by making sure you use thin wire to make your coil and thus generate at resonant frequency of the high resistance coil High voltage.

Let say you generate 2500v back emf, that means you need maximum of 100pieces of 25Vdc rated electrolytic caps and 400pieces of H.V H.F Diodes.
Let say the each cap is 10000uf.In series, that makes 2500v at 100uf. And this level, the amassed current will be high as the capacitance is  now further lowered by 100times.

Back E.M.F recirculation, high pulsing frequency, high resistance coil and capacitor trick makes the magic Power in BEMF.