Partnered Output Coils - Free Energy

[EMJunkie]

Yeah it's about energy from the vacuum

http://www.borderlands.de/Links/ZPEPaper.pdf

Raycathode, well yes, but to be a little more specific, its about Work in the System.

Asymmetrical Regauging can enable a machine to have an Asymmetrical Work Period. When your input is On, say its a 50% Duty, then one would expect to see a 50% work Period. These machines do not work like that, we can very easily have a 10% Duty, Input On Time, and a 90% Work Period after the Input Period Work Period. Thus giving a 100%, or very close to work period for only a 10% Initially. An Asymmetrical Work Region for the Input you supply to the system.

Getting your Potentials up, alone, is not enough! The System must all for the use, to provide Work with these potentials, Work is M.M.F vs M.M.F, or Ampere Turns vs Ampere Turns. A Potential is required for this to occur however, no Potential, No Work. One can have Potential but the System can do no Work!

There is some work to make this work properly, but I gave an example, one is a very basic machine above, now again below. Thx for the link, I had not seen that before.

Best Wishes,
   Chris Sykes

[EMJunkie]

Can I see the electrical circuit of this experiment?

Yes, it is posted to many pages on this thread, from this page:  http://overunity.com/15395/partnered-output-coils-free-energy/msg453309/#msg453309 on.

Best wishes,
   Chris Sykes

[EMJunkie]

Kolbacict To be honest I haven't bothered going into Tinmans Vacuum cleaner motor thing
A because I don't have one to hand and for another, ever wondered why that sort of motor draws so much current
and is so speed restricted ?

In saying this to get round the above you will have your work cut out and you would have to start your own thread on how it's done, as the BEMF is fed back into the com, that's why it gets so hot and draws so much current.   

and it's not Don Smith.

Chears

I always advise against jumping to conclusions that can very easily be proven to be incorrect.

You could easily do a few experiments to learn more, I have after all shown how easy this is and what exactly the simple circuits to use to get you started:

See: http://www.aboveunity.com/thread/non-inductive-experiment/ for some simple experiments to make progress in the right direction.

You will notice, there are many on my forum that have replicated these experiments, all successful but all getting varying results.

Not everyone gets Above unity first time around, this is why some work is required, I cant mathematically predict these machines, they all work a little different. Core, the Wire, small things make a difference.

Everyone does get results, if they stick at it.

Best wishes,
   Chris

[EMJunkie]

The saw tooth wave form, it's the charge of the dump or boost capacitor has to be charged before it's
it's energy is pulse dumped into the Tesla or Katcher primary winding just like is done in an old tube style TV LOPT fly back. I expect your going to ask me what significance there is in doing just that next.

Unfortunately that is top secret and requires a men in black visit sorry

Hahaha funny, what if I told you I am a MIB?

I think you would be surprised, there is a lot to be learned here, but its not top secret and I am only a Man In Black some days. Depends what I get out of my draw on the day.

Assume nothing, base all posts on fact, speculate only when one asks and specify that speculation - Its really easy, you will be very surprised once you reach the goal, looking back, you will think to yourself, wow what was all the drama about, its so easy...

Part of the answer is in this video: https://www.youtube.com/watch?v=5BeFoz3Ypo4

Best wishes,
   Chris Sykes, you have the link to the data.

[EMJunkie]

I like to work with compareable units specially if in the multi,-pulse range:
to measure ≤ -unity or ≥- unity is sometimes difficult without simple formula - knowledge



1 W- h ~ 3,412141 BTU     1 W-Hz ~ 0,0009478 BTU   h/Hz here : 3600/1

First problem  : 1 Wh DC ~ ? Wh RMS( Root Mean Square) AC ? Hz  ( by fixed relation : 1 Hz = 2 pulsations)



Seconds : 50 Hz ~ 3000 RPM and 60 Hz~ 3600 RPM
                 James Murray III dynamotor : 50 Hz ~ 1500 RPM   TORQUE in Nm  ?

Now entering into PWM with the circuit process " designing",pulse duty cycle period/duration/frequency/......                                                                 embeding into
em/ em or em-pm/em or em-pm/pm repulsion or attraction forces in linear/static or rotative devices
with conventional materials or permalloys ( saturation degree) and capacitive dielectric


The great problem : if h/Hz = 3600/1  ergo  sec/Hz = 1/1
but PWM technology was introduced as power on/off technique and not "all time on"- process ,especially in stepper-motors as drive( printer et cet.)
Power on = formula on power off = formula off ≤ 0 consume ( only  circuit standby consume)

little more complicated : PWM in displacement current circuit and feedback

Reading your post LancaIV, your'e thinking about this correctly. Nice to see!

Best wishes,
   Chris Sykes