Partnered Output Coils - Free Energy

[Raycathode]

Yes lets try again on friendlyy terms with out the nit pickking
Sohow about getting the eye glass out and asking Cris to look at whwhere we are going wrong as he is the only man
we can ask this question too and expect the truth in the use full answere.

I'm not trying to lead him upthe Orinoko with out a padle, if he nows nothing say so or heven sake tell us what is not being disclosed.

Raymondo

Ps is Cris in Oz or Nzld ? the wife says he doesn't sound like Paul Hogan to her as she watches a lot of NZ Tv stuff she gets sent links to.

All the best eah!

Raymondo

[ramset]

Chris I am confused a bit ....  perhaps for clarity ...will discussions about  measurements and results be allowed ?
that is where things got off the rails in the past ...most builders here have boxes they check off towards a result they expect.[typical protocols for building almost anything]

HOWEVER.... it seems you infer a surprise overlooked my most [All ?] other EE's
and this is where I hope this goes.
an awareness and understanding heretofore hidden from common man.
There is one builder in particular I will be approaching who is completely unaware of this topic
however ..in fairness he does use measurement to advance his understanding ...will that be OK ?
Note to Raymundo in fairness  ...you have shown no experiment in this topic or reason to embrace your efforts.[me too]
So with zero effort "shown [replication]"....you demand what ?
Chris has set a "minimal"criteria for engagement here ....do something besides write words and he will help .

seems fair to me ...and I am working towards that goal.
also not sure why it matters where anybody hails from...here we are all earthlings... IMO.

[Raycathode]

Chris I am confused a bit ....  perhaps for clarity ...will discussions about  measurements and results be allowed ?
that is where things got off the rails in the past ...most builders here have boxes they check off towards a result they expect.[typical protocols for building almost anything]

HOWEVER.... it seems you infer a surprise overlooked my most [All ?] other EE's
and this is where I hope this goes.
an awareness and understanding heretofore hidden from common man.
There is one builder in particular I will be approaching who is completely unaware of this topic
however ..in fairness he does use measurement to advance his understanding ...will that be OK ?

Note to Raymundo in fairness  ...you have shown no experiment in this topic or reason to embrace your efforts.[me too]
So with zero effort "shown [replication]"....you demand what ?
Chris has set a "minimal" criteria for engagement here ....do something besides write words and he will help .

seems fair to me ...and I am working towards that goal.
also not sure why it matters where anybody hails from...here we are all earthlings... IMO.

Well if your referring to me I don't mind but them I'm trampling over poor Chris
and to be honest I haven't been too well just right at the start of the G5 role out now there is a coincidence. Perhaps a aluminium RF brain shield
I don't believe in coincidence.

What I have at the moment is a dual winding mono pole driver Neo device it's not really a motor  but similar to JB's
window motor with two Hall device's . The problem with that was it was just a motor one hall was on for 180 deg
and the other coil was on the rest of the 180 deg.........so no BEMF from that device I then used an OPTO with on time cut outs as I want an impulse !
with far better on of time results and digitised it with logic, which is what I'm playing with now.

I  originally hadn't got my tech stuff names right, as I think i did Chris's head in !

Raymondo

[Atti2]

Hello everyone.
First of all, I apologize for the google translation.
I don't want to protect this man, but I think Chris is basically kind! Your intention is good. Because he works to give everyone a machine that is usable. You put a lot of effort into these jobs. Of course, you also need the help of others. But he's just another man who can make a mistake. You hold your own forum too strictly. He looks with suspicious eyes at anyone who doesn't do something he originally envisioned. So there is no freedom! No other opinion, he is the boss. Otherwise forum foreclosure is the punishment. This is a mistake.
 For a while I was a member of the forum. I think I've taken my share of the job fairly. I have done quite a few things within my means. While others were just listening.
https://www.youtube.com/watch?v=yhuBlxLktKE&feature=emb_logo
For example. In this video at 7:45 he says he doesn't understand why I did what I did. He didn't ask me personally. She wasn't even curious!
 -I had a personal attack. It is true that I did not report to the forum moderator.
-Also Chris kept calling me a troll because I thought differently. I didn't follow the instructions. But the effect is the same. The ultimate goal is the same!
That's why I got angry with them.

For these two reasons, it seemed to me the best solution was to delete my yt channel. I also deleted some of my posts in the forum. It might not have been, but at the time it seemed like the best solution.
 Therefore, I am no longer a member of the forum. Is Prohibition Right? Viewpoint question.
 From which point of view.
This post may seem like a childish act of betrayal. Indeed.

But what if the purpose is to find out the truth? Do you have extra energy? To what extent? What method?
After all, that's why everyone is here to find out. Everyone is working on this. Just not the same way.
Atti.

[EMJunkie]

Chris I am confused a bit ....  perhaps for clarity ...will discussions about  measurements and results be allowed ?
that is where things got off the rails in the past ...most builders here have boxes they check off towards a result they expect.[typical protocols for building almost anything]

HOWEVER.... it seems you infer a surprise overlooked my most [All ?] other EE's
and this is where I hope this goes.
an awareness and understanding heretofore hidden from common man.
There is one builder in particular I will be approaching who is completely unaware of this topic
however ..in fairness he does use measurement to advance his understanding ...will that be OK ?
Note to Raymundo in fairness  ...you have shown no experiment in this topic or reason to embrace your efforts.[me too]
So with zero effort "shown [replication]"....you demand what ?
Chris has set a "minimal"criteria for engagement here ....do something besides write words and he will help .

seems fair to me ...and I am working towards that goal.
also not sure why it matters where anybody hails from...here we are all earthlings... IMO.

Ramset, lets be clear, I do not and never have "Demanded" anything!

I offer, to those wanting to learn, a path forward, to learn more about Energy Machines if that's what other parties wish? I will not, and never have, twisted anyone's arm! I have stated many times also, that I am also still learning, although I have come a long way, I have a great deal to share if others want to learn? It is optional, not compulsory!

On this thread, we have had many report success!

I use Tinman as a reference simply because his was the best documented. Its a real shame that so many jealous, insane people went loopy and destroyed the opportunity we had!

Tinman's RT V3 was COP = 1.84

_______________________________________________________


in v: 12.80
in amp: 0.722
= 9.2416


out v: 10.40
out amp: 1.639
= 17.0456

COP: 17.0456 / 9.2416 = COP = 1.84

_______________________________________________________
Loaded with Fan:
_______________________________________________________

in v: 12.80
in amp: 1.356
= 17.3568


out v: 10.40
out amp: 1.633
= 16.9832

COP: 16.9832 / 17.3568 = COP = 0.98
_______________________________________________________

If you have proof, that proves me wrong, then please present it!

Regarding Measurements, I have said it before and will say it again, I am not debating measurements, I know this works, I know it can be self looped, on my forum I have provided many scope shots, I provide NO Measurements! None that can be used as proof and I do this deliberately!

Offering others Golden Cookies only creates a rush of Crazy's to the party and that's exactly what happened when Tinman presented his RT, Crazy's came rushing to the party, destroying what this thread had! I have no desire to entertain Crazy's!

People taking on this endeavor, on their own, using educated decision's is the only path forward! We need people that are willing to work, willing to do experiments to learn, willing to have some failures, because there is some failures, its how this research goes. Very few succeed first time!

Ramset, although you may not agree with the way I have done things, I have done what I have done for very good reasons! I made it clear from day one I was doing this my way!

If your'e happy to accept this, then we can continue! If not then best we part ways again.

Best wishes,
   Chris Sykes