Overunity.com Archives is Temporarily on Read Mode Only!



Free Energy will change the World - Free Energy will stop Climate Change - Free Energy will give us hope
and we will not surrender until free energy will be enabled all over the world, to power planes, cars, ships and trains.
Free energy will help the poor to become independent of needing expensive fuels.
So all in all Free energy will bring far more peace to the world than any other invention has already brought to the world.
Those beautiful words were written by Stefan Hartmann/Owner/Admin at overunity.com
Unfortunately now, Stefan Hartmann is very ill and He needs our help
Stefan wanted that I have all these massive data to get it back online
even being as ill as Stefan is, he transferred all databases and folders
that without his help, this Forum Archives would have never been published here
so, please, as the Webmaster and Creator of these Archives, I am asking that you help him
by making a donation on the Paypal Button above.
You can visit us or register at my main site at:
Overunity Machines Forum



Partnered Output Coils - Free Energy

Started by EMJunkie, January 16, 2015, 12:08:38 AM

Previous topic - Next topic

0 Members and 213 Guests are viewing this topic.

hyiq

Quote from: tinman on February 10, 2017, 07:20:43 AM
I am referring to the current flow within a PM,that maintains the PMs powerful magnetic field.

Look at the magnet as a pump,where the virtual photons are ejected out one end,and sucked back into the other-just like a water pump draws/sucks water in one end,and forces it out the other.

How do we access this current/energy, that continually pumps these virtual photons in a continual loop.


Brad



I am a little surprised to see so little posts! So little activity!

I have been away for a couple of days, attending to some things, and there is only 4 Posts. but: 7324 thread reads in the last 4 days.

Often when something is discovered, time is needed, to understand and figure out where the absolute most fundamental concepts lay, to "Understand" exactly how a device works. I understand that some will be taking time to go through these steps...


   Chris Sykes
       hyiq.org




P.S: Have you ever seen a more simple, more straight forward, Simple to construct, Cheaper to construct, Free Energy Machine? Three Coils, One Input Coil, Partnered Output Coils, Energy Above Unity!!!

tinman

Quote from: hyiq on February 13, 2017, 12:55:39 AM


I am a little surprised to see so little posts! So little activity!

I have been away for a couple of days, attending to some things, and there is only 4 Posts. but: 7324 thread reads in the last 4 days.

Often when something is discovered, time is needed, to understand and figure out where the absolute most fundamental concepts lay, to "Understand" exactly how a device works. I understand that some will be taking time to go through these steps...


   Chris Sykes
       hyiq.org




P.S: Have you ever seen a more simple, more straight forward, Simple to construct, Cheaper to construct, Free Energy Machine? Three Coils, One Input Coil, Partnered Output Coils, Energy Above Unity!!!

I have ordered a larger toroid transformer,so as we can reduce measurement error,by upping the power levels being measured.

Also started my new job-back into the truck's.

Will be doing east/west runs this time,so will be away for weeks at a time.


Brad

hyiq


Quote from: tinman on February 13, 2017, 07:25:02 AM
I have ordered a larger toroid transformer,so as we can reduce measurement error,by upping the power levels being measured.

Also started my new job-back into the truck's.

Will be doing east/west runs this time,so will be away for weeks at a time.


Brad



Hey Brad - You're quite right, the CSA or Cross Sectional Area is a factor where we can improve the over all Induction. Because in Transformers: N = E 108 / 4.44 B A F


Of course this Equation can be rearranged to return another variable if required: E = 4.44 N F B / 108


Where:
   N = number of Turns
   E = EMF or Voltage
   B = Magnetic Field in Gauss
   A = Cross Sectional Area
   F = Frequency (Sinusoidal Hz)


Enjoy the Country Side! Nature's Beauty s breath taking!


   Chris Sykes
       hyiq.org




hyiq




Brad, we talked about some time back, how a Magnetic Field may not be bound to the local region it appears to be confined to, and that it may extend past the local boundary:

Quote from: EMJunkie on September 21, 2015, 06:53:13 PM

@Shylo - No, its Induction!!!

See: http://www.overunityresearch.com/index.php?topic=2760.msg45207#msg45207


Quote from: EMJunkie link=http://www.overunityresearch.com/index.php?topic=2760.msg45207#msg45207


For Everyone: Asymmetric Fields! Next to no Pushing, but at the same time opposition, allowing a force to Attract another Force. An addition to Newtons Third Law! How could this possibly work? Does a Magnetic Field extend past the Repulsive Force of another? Where is it that interaction of Fields are Really Occurring?



   Chris Sykes
       hyiq.org



I really don't like to advertise Over Unity Research because of their behaviour when I went over to them after being hammered by the OU Goons here, they were just as bad as the OU Goons!!! Changed the name of the Thread, demanded Proof, and were not willing to put any effort at all into learning anything of value!!! Just a bunch of spoiled children!!! Who has egg on their faces now??? Independent Replications


I put the top bit about the Fields in quotes because it was important.

Here, in Partnered Output Coils, we see Magnetic Field Interactions well beyond where we would expect to see them. Many Magnetic Fields at the Same Time in the same region of Space, eg: Inside the Core material.

Floyd Sweet, in the Lab Notes, it says:

Quote


Once moving, the flux grows and decays at the excitation frequency and apparently induced, by Flux Linking, a current in the output Coils which was in this case measured at 4.6A x 24.2V = 111.32 Watts – measured twice, observed by 3 persons.




This is exactly what we see, Flux Linking, with some Flux Cutting at the same time, and yes of course the Flux has to be moving, this is the Magnetic A Vector Potential! Also, Importantly, we see: "the flux grows and decays at the excitation frequency" exactly as was said!!! In other words, we control the devices with our input Frequency.


   Chris Sykes
       hyiq.org

woopy

Hi Chris and all

As i had a toroidal transformer at disposal, i decided to replicate Wistiti's experiment

Good and encouraging results so far. I hope there is no mistake in the measurement, but i try to be very carefull when we get such efficiency. Of course feel free to correct me if you notice some error.

https://youtu.be/Z3RQkQEv59k

Will reread this thread to better understand what is going on here. But not so much time at the present.

Hope this helps

Thank's to all of you for your work

Laurent


Edit: please read itsu's comment and my answer (next 2 posts). It is very likely that the results on the video is erroneous due to a faulty clamp meter.