Partnered Output Coils - Free Energy

[hyiq]

I want to thank Itsu and Partzman for doing the replications they have! This is some excellent work!!!

We did start of with: "All normal nothing strange" until I pointed out a few things. I would like to point out, Itsu has now done 5 Videos, each better than the one before.

   MrPreva replication 1 : https://www.youtube.com/watch?v=GHA6hnKziAU&feature=youtu.be
   MrPreva replication 2 : https://www.youtube.com/watch?v=mm6K-3O8rM0
   MrPreva replication 3 : https://www.youtube.com/watch?v=30oujoUF2Uc&feature=youtu.be
   MrPreva replication 4 : https://www.youtube.com/watch?v=SgH5rl3TIAM
   MrPreva replication 5 : https://www.youtube.com/watch?v=PwkncpQs70g

Now something I am a bit concerned about, is the lack of views! We are getting very few people actually watch them! 17, 15 36... Really this is not a very good effort at all...

@Itsu - When you have time, please don't forget my suggestion, please take note of the Coil Winding direction, remove one and wind it back on, the other way. CCW/CW, to CW/CW in this circuit, one way gives a better result than the other. Still not OU, but all the same an interesting result.

You know what, I am very happy that these experiments have been done, I am very sure they have been of benefit to the Experimenters involved!


@Itsu - Do you see where the second two Elephantines might be situated now?

   Chris Sykes
       hyiq.org

[hyiq]

Chris Sykes
       hyiq.org  500+ Pages and 50+ YouTube Videos a Small Book




how about your recent point.

  Chris Sykes
      hyiq.org
Quote
Magic I should add, my input, as does others, will actually go down when adding a Load.
end quote

Why would you call this  magic ?

happens with any transformer when played with outside of the circuit it was designed for ?
and even in Cheap motor speed control circuits?

From your infomercial

darediamond quote
But MY LOAD WHICH IS A DC MOTOR DID NOT AFFECT THE INPUT WATTAGE AT ALL. I REAPEAT AT ALL

No  Magic just a typical Motor speed controller....

Chris Sykes
      hyiq.org

you invited experimenters to your party

first you thru out Luc [bad result nothing special

Now Partzman did too good a job [extra bad result nothing special

Chris Sykes
      hyiq.org
Quote
Partzman WOW, what an amazingly, throughly dedicated, very specific focus on accuracy Partzman... I know some of your background, but really, is this because Tinman was caught, again, Miss-Leading the masses? Come on, be honest, do you work for, take orders from or have you had any kind or direction from Chet K or any Minion that does the said biddings for?
end quote

Chris
your burning through all the guys who know how to measure here !!

maybe you'll just have to fall back to measurements and how its done properly?

I know it did not work out too well your first and only time  two years  ago .

Please teach us how to properly measure your  work


How you taught the lostFox to do this
from your infomercial

quote
WOW That's 2028% difference..
end quote

yes I know wistiti and Lostfox now spend countless hours and dollars working for Bruce in search of OU
oh yes and darediamond seems very busy searching too....

you've given sooo much

please teach us how to measure

Chet K - This is a LOT of very POOR behaviour!!!



I will ask you again, Chet K Please leave and don't ever come back!


   Chris Sykes
       hyiq.org

[barbosi]

I asked a simple question: WHY YOUR OUTPUT IS NOT AFFECTING YOUR INPUT?
And this is your answer?

As all ways and as expected... 500+ Pages and 50+ YouTube Videos a Small Book and Barbosi still does not get it...


Comprehension issues!!!

As I said before, what you call Partnered Output Coils, is an old coil combination used by Tesla. Here is the picture from his lecture:
https://upload.wikimedia.org/wikipedia/en/9/9b/Tesla-DisruptiveDischargeBox.png
He called it something-yada-DISRUPTIVE-yada-something.
DISRUPTIVE dude!!! you get it?

Apparently not because when one of the followers publishes a picture (like this http://overunity.com/15395/partnered-output-coils-free-energy/dlattach/attach/162537/image// ) you praise him:

Thank You for posting something sensible and of use!!!


A very quick look over your figures, I would see no immediate problem there.

Chris, it is not me with comprehension issues. I raised the ball for you to score, all you had to do was to explain WHY YOUR OUTPUT IS NOT AFFECTING YOUR INPUT.
All you had to say was in page #1 of this thread, the rest of it confuses the hell out of your followers.
Please stop using the "magic" with elephant pictures, use fields instead.
Can you?

[partzman]

Hi Partzman - Thank you for taking the time to replicate and share your results.

Question, none of the waveforms show an exact 180 Degree Phase Shift like was in Itsu's Wave forms. Itsu's wave forms showing a very clear 180 degree phase shift. I was also able to get the 180 degree phase shift.

Your results on your MrPreva circuit are better than mine. I got 82% - Like I have said on many occasions now, the MrPreva Circuit by itself is not OU!


   Chris Sykes
       hyiq.org




Edit: Must be the Colours, yes I see now: Teal and Pink Wave Forms... Nice Work - So, what next then, what's the next step?




P.P.S: WOW, what an amazingly, throughly dedicated, very specific focus on accuracy Partzman... I know some of your background, but really, is this because Tinman was caught, again, Miss-Leading the masses? Come on, be honest, do you work for, take orders from or have you had any kind or direction from Chet K or any Minion that does the said biddings for?

Chris,

Thank you for your comments above and I would like to follow with comments of my own.  First, I will return to my own research efforts that include magneto electric induction, nonlinear electromagnetics and a few other things.

Second, I don't see Tinman mis-leading anybody as he simply experienced measurement errors.  This is very easy to do as I'm sure you know.  When any of us "finds" OU in any particular device, we tend to rush and publish our findings only to maybe discover later that we have an error in logic, connections, measurements, etc.  Been there and done that many times!

Lastly, do I take orders, etc, from Chet and his minions?  Let me try to explain it this way- I work with Chet and his minions (including many you have mentioned here) toward one common goal, that is, to achieve development of a device that safely can supply power in an independent form to release the world from the tyranny of the PTB.  Maybe you don't see it this way, but I even try to work with you.  I have never received any compensation from anyone in my FE efforts over the past 35 years but I have received ideas, encouragement, correction, critcism, and the comfort knowing others suffer thru this journey like myself.  As we all progress together in this effort, we only create delays and harm by devouring each other for whatever reasons, and this is exactly what the PTB wish us to do.

There are many in this research area that claim this and that and some no doubt really do have something.  But honestly, this is way bigger than any one individual and will require the efforts of many to achieve overall success if that is possible!  Maybe we all should try to chill out a little and focus on the real problems at hand.

Respectively,

pm

[partzman]

Very impressive indeed PM.

In my updated last post here:   http://overunity.com/15395/partnered-output-coils-free-energy/msg500436/#msg500436 
i also included the input / output measurements (156.8mW / 146mW) for a cop of 0.93, so very close.

The 1 Ohm resistors i use are Metal film 0.6W 1% resistors.

What strikes me as odd is that in resonance your secondary currents (blue and pink) are not either 0 or 180° phased compared to the input voltage/current like mine.

Thanks,   itsu

Itsu,

Yes, our results do reasonably agree with the exception of the output phase shifts.  This may be due to the fact that I used a power amplifier with a very low output impedance as compared to your Rigol generator with it's 50 ohm source impedance.  I still have the test setup in place so I'll do a little checking on this.

pm