Moon Walkers.

[picowatt]

So i have found a site that has all of NASA's high res pictures--with large zoom capabilities.
This is a treasure trove to the researchers out there.

Below is a couple of high res close up's of the lunar landers of Apollo 16 and 17.
I mean ,just have a look at these wrecks . Are you truly trying to tell us that these wrecks carried man to and from the moon?-->i mean REALLY lol. This has to be some sort of joke
Square cut unfinished corners of sheet metal--the flooring base looks like corrugated zincalume sheeting from some farmers hay shed--all the seems are coming apart-->i mean,just look at the wrecks.
And you have the balls to say that i couldnt design and build a vehicle that could opperate in the vacuum of space.
All NASA's millions to build the best of the best -yea right--looks like it.

The inner and outer walls of the LEM were very thin.  Between the inner wall and the outer wall, which is actually the micrometeorite shield panels seen on the outside of the LEM in the images posted, was a thermal blanket.  The outer micrometeroite shield and thermal blanket were supported away from the inner skin by standoffs.  On the way to the moon, the outer micrometerorite shield of the LEM saw large temperature variations which caused thermal expansion and contraction of those outer panels.  They were intentionally mounted to allow for this (and reduce thermal conduction to the inner skin). Even so, being attached at the standoffs produced some degree of inconsequential buckling. Keep in mind the LEM never saw aerodynamic loads, needed to be as light as possible, and in the end was disposable.

Astronauts have remarked, somewhat tongue in cheek, about how thin even the inner walls of the LEM were and that they were a bit concerned over how easily they might be punctured.  Nothing was made any heavier than it absolutely had to be.  Anywhere weight could be saved it was.  Space is not easy.

Here is some cool design info, wall construction is around page 7 and 8 or so:

http://www.hq.nasa.gov/alsj/LM04_Lunar_Module_ppLV1-17.pdf

Just for grins, check out the explosive devices discussed toward the end of the document.

PW

Added:  From the linked document, those outer micrometeorite panels, minus additional thermal coatings (i.e., paint) were made from aluminum that varied between .004" and .008" thick, which is similar to the thickness of a beer can.  I believe I read somewhere that the inner skin was only on the high side of those thickness numbers or just a tad bit more.

[Nink]

So i have found a site that has all of NASA's high res pictures--with large zoom capabilities.
This is a treasure trove to the researchers out there.

Below is a couple of high res close up's of the lunar landers of Apollo 16 and 17.
I mean ,just have a look at these wrecks . Are you truly trying to tell us that these wrecks carried man to and from the moon?-->i mean REALLY lol. This has to be some sort of joke
Square cut unfinished corners of sheet metal--the flooring base looks like corrugated zincalume sheeting from some farmers hay shed--all the seems are coming apart-->i mean,just look at the wrecks.
And you have the balls to say that i couldnt design and build a vehicle that could opperate in the vacuum of space.
All NASA's millions to build the best of the best -yea right--looks like it.

No offense Tinman but I can't believe NASA built that.  This looks like something you through together with some mates in the back paddock after a couple beers. That is really a rough job and you need to learn how to use a rivet gun cause you buckled the crap out of sheet metal. If I was your high school metal work teacher I would have given you an F for that piece of garbage. 

Is that duct tape ?

[joel321]

I have seen some disturbing videos disclosed anonymous on the wed that have already been deleted showing landing on the moon and hidden "man made" caves on the moon.

In my beliefs, I do believe they went there. BUT they only managed it to do it with "stolen" technology. This goes back to Einstein, Nikola, Hiddler (I miss spelled it on purpose), and others that are not US born. Just look at the history of the rocket...I forgot his name but he is not a US born (like many) that made it possible for the rocket to break from the earth's "gravity"...Einstein was not US born but he was a great thinker and founder of great thoughts.

At any rate, I do believe they managed to go to the moon by spending lots of money building non-US citizens stolen ideas. The great minds always come from poverty! Or the occasional genetically born person with a different brain than the average...but most come from the poor and not the rich.

Eisntein = foreigner.

Nikola = foreigner.

Hiddler = foreigner.

Wright brothers =   German, Dutch, English, Swiss

That dude that made the rocket posible to go outside the earth's atmosphere = foreigner.

The US is guilty of stealing ideas and not crediting where they come from?

At any rate, I do believe they managed to get to the moon. The is no purpose on going back there again?

The conspiracy? The Chinese will surpass the US eventually! They are even taking over tools. I am a big tools fan. Like from the store sears. They use to be USA made and proud tools. Now they are made in china. Many sears have closed. Radioshack has closed many US stores too. One of the major tool brands right now is Milwaukee which is own by china. That company has surpassed sears and has bought other US tool companies too. Makita (Japanese) is another major brand tool company and is not even US either.

Shyt, now that I think about it, not a lot of innovative things come from the US...they just "steal" innovations from others. O.0 There is this INCOMPREHENSIBLE ideology where the thinkers give the ideas to the US and the US use those ideas and think their citizens came up with those ideas..which history shows that is 100% false. IMO.

Now I need to go take my medication lol

[MileHigh]

Think about this...  If the moon landings were faked then presumably the entire LRO design team and operations team would have to be in on the conspiracy.  We can guess that half to two-thirds of the personnel on both teams weren't even born when the first moon landing was made.  So that means you had to sign fresh engineering students out of college into secrecy into a nefarious criminal government plot.  Once you just tell them that they have to sign they are bound to not tell anyone that you asked them to sign even if they aren't hired.

The criminal conspiracy is unworkable and doesn't make any sense.  Whenever a new space probe is developed that images the moon you have to sign the new team into a criminal conspiracy.

It makes about as much sense as stating that the WTC towers were wired with explosives ahead of time.

[Johan_1955]

Balcony is always crying for a: Third-party validation.


The stones are Third-party , oops a half ton!?!?!, but so that we can check and proven phoney!


All the rest is not Third-Party and so Disney, why is Dansing not reacting?