Dr Ronald Stiffler SEC technology

[PositronFlow]

In this thread Dr. Stiffler's experimental methods are used (kind of) toward applications such as leds arrays using RF in wireless open media.
Other topics include exciter trouble shooting, static field modulation experiment, Stiffler loop, sec, psec.

The scope of the question is extremely large. accelerated mass, nope. also not covered here
Basics of P and N junctions exposed to static or electromagnetic typically focus on lorentz, miller and hall effects within the semiconductor media.
However the list of keywords found in discussions can expand profoundly in various applications, patents, medical, biological, nuclear, hard drives ect ect ect.
https://ntrs.nasa.gov/archive/nasa/casi.ntrs.nasa.gov/19690027332.pdf
recent scientific discoveries July 22, 2015 
http://www.andrewfyfe.com.au/editorial-cartoons/recent-scientific-discoveries/

Thank you for the information.
It is not quite what i am seeking,but most likely my very broad description was not defined enough.

When i asked about static magnetic fields in relation to P/N junctions,i was referring to the likes of photovoltaic cells,where magnetic fields are used to knock electrons through the P/N junction rather than photons.

Once again,thanks for the help.
I will see what i can locate on the subject matter through the search feature here.

Christie.

[mikrovolt]

i was referring to the likes of photovoltaic cells,where magnetic fields are used to knock electrons through the P/N junction rather than photons.

Christie.

Several variations have been made and finding increased MC magnetocurrent developed out of magic angle spintronics using various materials.
This particular experiment is interesting of all materials the C60 has been an ecclectic curiosity with some less defined crystal energy shungite.
https://d2ufo47lrtsv5s.cloudfront.net/content/sci/357/6352/677/F1.large.jpg
ref: http://science.sciencemag.org/content/357/6352/677.full.pdf

In Dr Stiffler's SFM experiment he describes the normal magnetic field and the modulated. SFM is unique and requires attention to detail and study of his previous videos
on SFM. It is a separate animal from his SEC and Loop. He explains some of it in this video. It should be noted that Dr Stiffler's methods test set up must be followed very carefully
in order to get same results requires much patience and skill like building a ship in a bottle.
https://youtu.be/FFhRx8PgK8c

[NickZ]

   Guys:
   Looks like the Doc has gone off in a different direction, again.   Nothing more about the ground transmission... as Lidmotor had suggested, it probably didn't work as expected.   Now, he has come out with this new "Cloud coil" charging a big capacitor, and lighting a car tail light bulb, for a few seconds. 
WTF?   https://youtu.be/c5uAA2ieTnY
   Gyula:  To your suggestion I am now working on a series connected led bulb set up. But, not really getting any better light output than with the parallel led bulb placements.
  I can now light several ( leds in series, from a 120v led bulb, but not really getting any more lumins, than I was before. I have not taken a reading on the individual bulbs, yet, but I will.  Still working on all this. 
   I am getting 4  8.5w 120v led bulbs brought to me from the U.S., but will have to wait about two more weeks to get them. They are not the Cree bulbs, so I'm not sure they will have the metal back plate. I hope that they do, but I won't know until I gut them.
   Itsu:  How are you making out?  Are you getting good light output from your series connected leds ? It's hard to tell from your video. Did the MPSA06 transistor actually work better, to produce more lumins than your previous transistors, or not?
   I'm still struggling to obtain any kind use able light from this type of set up. Hopefully the 120v bulbs that I've ordered will work better in this respect. 

[itsu]

   Guys:
   Looks like the Doc has gone off in a different direction, again.   Nothing more about the ground transmission... as Lidmotor had suggested, it probably didn't work as expected.   Now, he has come out with this new "Cloud coil" charging a big capacitor, and lighting a car tail light bulb, for a few seconds. 
WTF?   https://youtu.be/c5uAA2ieTnY
   Gyula:  To your suggestion I am now working on a series connected led bulb set up. But, not really getting any better light output than with the parallel led bulb placements.
  I can now light several ( leds in series, from a 120v led bulb, but not really getting any more lumins, than I was before. I have not taken a reading on the individual bulbs, yet, but I will.  Still working on all this. 
   I am getting 4  8.5w 120v led bulbs brought to me from the U.S., but will have to wait about two more weeks to get them. They are not the Cree bulbs, so I'm not sure they will have the metal back plate. I hope that they do, but I won't know until I gut them.
   Itsu:  How are you making out?  Are you getting good light output from your series connected leds ? It's hard to tell from your video. Did the MPSA06 transistor actually work better, to produce more lumins than your previous transistors, or not?
   I'm still struggling to obtain any kind use able light from this type of set up. Hopefully the 120v bulbs that I've ordered will work better in this respect.

Hi Nick,

well, i now have 3 sources to drive the L3 coil / ledstrip (Xtal Oscillator with tank, SEC 18-x and my FG), but
all 3 will light the ledstrips in a similar matter, it just needs some tuning here and there.

Also the used transistors are no making a hugh difference.

So just kind of waiting for the next step (ground transport), which is somewhat delayed according to Stifflers
latest video (health problems).

I was trying to replicate his old 3 coil oscillator (https://www.youtube.com/watch?v=JIIhgHTEoM0&t=7s)
but was not able to get something from nothing  :-(

Itsu

[NickZ]

   Itsu:   Ok, thanks for the reply.
   
   On that linked video above, I think that if the Doc did not connect to what he calls the "earth ground", he would not see the tiny 2v output at the leds.  As he is actually connected to the stray AC, from the house ground wiring source,  and that is the "interaction" he is seeing at the coils.  That is my opinion.
   I've asked him to do the test outside, and he refused my request, along with some other guys asking for the outside test.
   And, I've shown just what that stray AC source can do to red, or white led,  on one of my previous older videos, to prove my point. 
   That is just stray AC, not free energy from the Aether, medium, or whatever...   
Try to light the Cree bulb like that, and you'll see what I mean. 
   Tapping something from the surrounding ambient, is another thing, me thinks.
   The "Cloud 2" video is also out now, if you haven't see it.