Confirmation of OU devices and claims

[a.king21]

   a.king:  Interesting that you placed the coils inside of the main coil. Can you show a video of your set up working?

I don't do videos. This resonance business is just the starting point to replicate Don Smith.  All you have to do is get some cheap Chinese frequency generators and make a gate driver  and MEASURE THE COILS.  You need a damn good LCR meter and I use the same one Rick uses.
Then you can do it yourself very cheaply. How many people tried to replicate Kapanadze and never measured the coils or learnt about 1/4 wave relationships?
Listen up very carefully:  The most important thing Kapanadze said to me personally was and I quote, " YOU HAVE TO MEASURE THE COILS".

[a.king21]

,

[Hoppy]

Well, he shared the other day that he hasn't bothered to read what I have written and I returned the compliment.  So who knows? I looked at around 20 or more posts early on before I was writing on this forum a few weeks back and noticed too many mistakes and differences with what we were doing to have any hope that this would go anywhere. I've looked at a few videos and posts more recently and still found similar differences. However, I'm thinking he is trying some new things that may show him curiocities. Nevertheless, I can see that Itsu and G are not getting the basics yet of this. It still looks like G is just trying to find some kind of remote disproof of anything I may be saying and trying to confirm mainstream understanding of these things. So that is the difference. They are limiting themselves to mainstream understandings and using their own parts to try and accomplish something unknown to themselves. That could go on for years I suppose. It is really an attempt to confirm an unknown claim at this point. Just more of the same for these forums, where some mainstream "expert" is directing someone with no OU experience to try this and that and hopefully stumble across some interesting result (maybe with Itsu the hope of OU, and with G some greater efficiency). It has the appearance of trying to replicate something A.King posted, or what I have done, but there was only really a commitment from Itsu to deal with A.King. So he will have to share what he see's as the differences. He was very optimistic about Itsu with me, and that was why I looked at his early postings. But then I saw the problems and told him that there were no real grounds for this going anywhere under the circumstances. I can see years of the same sort of thing trying to replicate the eastern Europeans and being no better for that. That is unfortunate that so much time has been spent without any success. I couldn't imagine spending years of my time doing that with no success. As Mario wrote the other day, there comes a point where this is either going to work for you or it is time to move on to something else. This is why this weekend I'll be starting a new presentation that should help people from the ground up giving the principles of free energy in a very condensed format. That way you can understand what to know and do and what is mistaken and what not to do.

Rick,
Interesting post. You have expended much time and words attempting to show the mainstream experts the error of their ways by applying conventional electrical thought and measurement processes to their experiemnts. Some time back, I mentioned Peukerts Law in respect of battery capacity. I'm sure that you like me have run Bedini wheel energisers for years on end using the same source and charge LA batteries in rotation, (as taught by John), whilst doing work charging batteries and doing mechanical work. By studying Peukerts Law, it can readily be appreciated why this is possible and on the surface appears surprising and exciting to the unitiated. So, in this respect, I understand why you are excited, as I was to experience what could be done using this type of tech. Also, like you, I have applied this to practical uses running modified motors with more powerful mechanical and solid state setups. The only difference between us is that I understand that conventional principles still apply and what we are really doing is exploiting the vagaries of batteries by carefully tuning loads to the device and as John correctly told us, use decent batteries that are well desulfated by conditioning. We are on a similar page Rick but I choose not to conduct a sermon on the issue. 

[apecore]

Then you can do it yourself very cheaply. How many people tried to replicate Kapanadze and never measured the coils or learnt about 1/4 wave relationships?
Listen up very carefully:  The most important thing Kapanadze said to me personally was and I quote, " YOU HAVE TO MEASURE THE COILS".

Good day a.king21,

Could you be more specific about that Kapanadze statement?
I m in here for a vew years, working on one of the kapanadze setups and such a post make me curious.

Is it just the measuring with the LCR?...  or did Kapanadze pointed to some more details regarding adjusting the coils?


Thanks in advance,

Greetings

[baudirenergie]

Hi a.king21,
thanks a lot for your comments.
I have a question about the DSE to earth ground and loop back. Can you explain your grounding in a little bit more detail? Has it something to do with drawing (bottom right) on Page 329 in Ricks Book?
Is your TX Coil directly grounded or do you use Diodes or/and so called "blocking Device" like a variable Capacitor or Resistor? Are your RX Coils simply grounded on one side?
Sorry for all this questions.
I know I miss the point here, but can not figure out, where I am wrong. I don't know, if I made mistakes with retuning, or in general with the proper grounding setup.
Also didn't understand the reason for the so called "blocking Device". Did they simply prevent from to much power, or did they have a another reason?
I can clearly see the gains, if I use the ground with the resonance kit, but in the same time I have more power consumption on the input side. Something must be wrong with my grounding.
Don't want distract from this important tread, but I would be very happy, if you can give me a idea, what I should looking for. If this is crossing a red line, you can also send me a PN if you like. Thank you.

I have a tap on my coil at 180khz going down to 137 khz, so I run my set up at 137 khz so that the cheap Chinese frequency generators can be used.
I also  use the DSE to earth ground and loop back. Also insert coils inside the big coil to lower the input wattage on the gate driver.
I am  also in the process of tuning a 1/4 wave coil which is out by 1/2 a turn but still unexpectedly lights an led to brightness.
I noticed when Itsu used the relay coil his input went down and his output went up. So that is worth investigating.
As I have said before I have had  the gate driver voltage unaltered at input voltage for 3 hours whilst powering the load although the frequency gen was separately powered.
I am also using batteries on input to take advantage of the Heavyside component.
I would use a 1/4 wave wire to power the setup but they would be too long.  You need to be up in the 400 mhz range to get your wire lengths down to a few feet  (4 or 5 feet).
EDIT:  I also use ferrite inside the satellite coils to fine tune them for maximum magnetic output.
I also use a gauss meter to ensure the total magnetic output is increased by correct placement of Rx coils.  I place the gauss meter directly against all the coils and check the gauss both wth led on and off - so it's a give and take situation as every coil affects every other coil.