Confirmation of OU devices and claims

[seaad]

 Rick was able to lit some 12V LED's in [below] 5 Watt realm total power [as we 'think'] with his gate driver. The voltage across the primary coil/ cap. was 5000 Volt.
If we want to achieve 5000 Watts gathered output power to deliver to our house e.g. . Then the voltage across the .coil/ cap. has to be around
150 000 volt. If I'm right.
Just think that the distances between the plates of the primary  [1 nF]  air capacitor has to be about 16 mm [2/3 ''].

Arne

[WhatIsIt]

Forget about Rick and check yourself if there is energy gain in simple LCR tank circuit.Look - if there is energy gain then the seup of many coupled coils is just overcomplication of this simple LCR tank circuit.

Fair enough!

I did. With every added coil ouput splits more and more.
I concluded it is radio station which was invented long before Rick.

What about your find? Do you did any measurements which showed more that input?

I would not write all of this things if I did not tried.
Or there is something different in your setup which I am not aware.

One question: How many of Rick coils do you need to power TV. 1000+ ??
If he had something, he did not perfected that.

Maybe you can show how to do it. With measurements off course.
I dont have nothing against it!

Otherwise you can post all day in vain.

Your post showing me like you detected energy gain. Please instruct me how to do it, so I can detect energy gain as well!

[WhatIsIt]

Rick was able to lit some 12V LED's in [below] 5 Watt realm total power [as we 'think'] with his gate driver. The voltage across the primary coil/ cap. was 5000 Volt.
If we want to achieve 5000 Watts gathered output power to deliver to our house e.g. . Then the voltage across the .coil/ cap. has to be around
150 000 volt. If I'm right.
Just think that the distances between the plates of the primary  [1 nF]  air capacitor has to be about 16 mm [2/3 ''].

Arne

First of all. Driving mosfet without gate driver is like forcing horse to run on one leg.
Nothing magical in it. With gate driver mosfet has speed as it should by specs.
With proper pull down resistors.
Without gate driver it is nothing. Only for child play.

Second. Power consists of  2 variables. Voltage and current. Only voltage is nothing.
You can do it with flyback more efficiently, if you need only voltage.

And if you want real speed. SIC diodes and mosfets. Future!
SIC diodes has no reverse time recovery.
SIC mosfets are drived with 20V, you should look their performance.
Silicon Carbide is speed! Low resistance.

I looked at Ricks mosfets, they are medium speed one.
After his 15 years of experience he choose very poorly mosfets and he talks how speed is important.
I can only laugh at his choice. Period.

[Vortex1]

First of all. Driving mosfet without gate driver is like forcing horse to run on one leg.
Nothing magical in it. With gate driver mosfet has speed as it should by specs.
With proper pull down resistors.
Without gate driver it is nothing. Only for child play.

Second. Power consists of  2 variables. Voltage and current. Only voltage is nothing.
You can do it with flyback more efficiently, if you need only voltage.

And if you want real speed. SIC diodes and mosfets. Future!
SIC diodes has no reverse time recovery.
SIC mosfets are drived with 20V, you should look their performance.
Silicon Carbide is speed! Low resistance.

I looked at Ricks mosfets, they are medium speed one.
After his 15 years of experience he choose very poorly mosfets and he talks how speed is important.
I can only laugh at his choice. Period.

You are right on It is good to see someone telling the real story about how to switch rapidly and other points you made.

From reading your posts, you are obviously well versed in the art,

But it us frustrating to deal with, or try to teach "the man of the hour".

Regards

[Vortex1]

Today Rick F gave a gift to the world that will Change our world forever ,tomorrow is the dawn of a new era where wars for oil and resources famine ,drought ..mass extinctions will be in our past ,air pollution Global warming etc....Our children and......Oh
Oh wait ,I'm sorry Rick F has more important things to do
quote  I have too much business to attend to to worry about these little children.end quote
see you in Church I suppose Rick ? here in these forums a few hundred thousand people working to teach and change the world ,to save many lives and stop much suffering to end oil wars Mass migrations Starvation Famine mass extinctions and ....
We Wait......
Chet K

Rick never had any gift to give. Period. End of story.

His only gift to this forum was his exit.

Now maybe serious work can commence without the profuse verbiage.

Itsu made a beautiful replication and accurate measurements that showed no excess power to be had.