How does overunity 'suppression' work if everyone knows about it ?

[F6FLT]

I wish you were just a little bit smarter than that, just a little bit!

Have you finally studied "U=RI"?

[Mr.Miyagi]

Have you finally studied "U=RI"?

U  R  N O T  V E R Y  S M A R T  BECAUSE R IS USELESS > 2MHz when it is wire wound.

Hi Void

Yes,turns out these !so called! non inductive resisters become quite inductive after 2MHz-ok below that.

Swapping it out for a 1/2 watt carbon resistor made all the magical OU disappear 


Brad

You should be able to do better than this if you wish to make headway!

Do better next time, alright!

[Mr.Miyagi]

How does suppression work today?

Small Energy Companies are formed, work with community leaders and small groups in the community, stopping the small guys, sucking up un-educated inventors that strike the jackpot first turn, tie them up in legal agreements to the cows come home, company goes belly up, agreements still stand, inventor has nothing and can not talk about it at all because of NDA's.

How does suppression work, the un-educated fools working for these small companies are unknowingly the problem.

Half the problem is psychological, meaning, if you have no idea, led to believe you're doing the right thing, legally, then you get a pat on the back. Sheeple!

How does suppression work? Its right under your nose and its all legal loop holes, small groups here names you know, all working, some unknowingly, some knowingly, to subvert the flow of information, to stop those getting close by padlocking their voice.

Open your eyes, look at the relationships of those here!

Open your eyes, study those before us!

Money, Greed and Legal Agreements with Organised Business Failures at the right time, tied in with small groups of people, planted, having a purpose, are how it works!

[SolarLab]

 F.Y.I. 

============  copy/paste from a recent SAEC EEG Project Proposal paper ============= 

ALTERNATE ENERGY DEVELOPMENT - TIME FOR A PARADYNE CHANGE   

For the last 100 years or so we have pursued new polution free energy sources. Recent solar, wind and
tide generation have developed to a great extent but the utopia has yet to be reached. Each of these
schemes have their drawbacks and linitations - weather and distribution being the most significant
drawbacks.

2019 is poised to see a significant paradyne shift in alternate energy discovery. A number of "self running"
electronic excess energy generators have been demonstrated over the last few years and our initial
research of these devices shows great promise. Replicating one such device to a point where the self
running claims were varified in the laboratory; however the device was unstable.

While attempting to mitigate the stability problem, it was quickly realized that without fully understanding
the operational theory; mitigating this anomaly with any degree of confidence was simply not possible.
We needed to know how this device technically functioned. We would have to better understand the theory.

After discussing a wide variety of the possible operational mechanisms of this device with a number of
learned scientists and engineers; that is, those that would even risk discussing the subject of excess energy,
there were many possibilities but nothing conclusive. This meant, we would have to develop this theory
ourselves, from scratch. Thus began our search to find the best way to do it. 

Recent capabilities in the areas of worldwide networking and Computer Aided Engineering (CAE) have
reached a level where it is now possible to employ skilled energy developers throught the world by linking
them all together to collectively engineer solutions through the use of a coordinated, modern, analysis and
simulation engineering tool set. 

By bringing these individuals together through an intera-networked platform, with coordinated goals backed
by state-of-the-art design capabilities, will significantly reduce the time to market of viable polution free
systems.

One primary component involves communications and organization. Again, CAE is the key to leveraging
existing advanced alternate energy individual knowledge bases found worldwide. Utilizing the CAE program's
built-in server, application files, documentation, information data base and web based development; a single
CAE platform provides an powerful, integrated, networked environment anytime, anywhere. 

Engineers, Scientists and Technologists share a common set of tools, while also being provided
up-to-the-minute design knowledge and technilogical development status; allowing a truely team focus
on the design, development, simulation, optimization, test, and manufacturing tasks. This unique architecture
also allows intra and inter net matrixing which provides any combination of cluster sharing, compilers,
servers, remote access or stand alone workstation capabilities.

Since the CAE developer serves a variety of industries and customer applications; they provide training,
support and other general information thus allowing the development team to fully concentrate on their
design and not be plagued with any technical or security issues.

An initial goal is to concieve and field viable systems that can easily integrate with existing industrial and
household appliances as well as transport platforms with low to moderate power requirements. Distributed
CAE is one of the key facilitators allowing designers to work together from concept through final product in
one environment.

Much of the fundamental non polluting excess energy generation "knowledge base" is, as yet, non existant.
This presents a very unique challenge; that is, finding people with a rather sophisticated set of skills. A mix of
in-depth conventional expertise combined with a strong desire to excplore beyond the limits without fear
while still maintaining pragmatic insight and determination. A rare combination indeed. Several "search"
ideas are presented in a seperate section. 

-------------------- clip -------------------- 
-------------------- paste ------------------ 

It is suggested that a search for individuals with an "excess energy" knowledge base might be found in selective
pockets such as alternate energy forums and other discussion groups. This step should first involve a study of
several current Forum group discussions, or threads, in an effort to determine if there is, in fact, a resource worth
exploring; and, if so, how best to integrate this "knowledge base" into a CAE focused development program.

Of prime importance are any individuals with the unique target skills and abilities. These might be identified by
reviewing that persons posting contributions over a period a time. 

The next question is to how best to formulate and promote incentives while still maintaining individuality and
creativity. Since this is an "Open Source" GNU type initiative, consider carefully the conflict of intellectual property
conpensation versus a collective, shared team, environment. 

A Caution: Human nature, being what it is, starts off open and freely-giving initially; however things change
quickly when, over time, there becomes "a real something of value" involved. Evaluate with extreme care; if
any hint of doubt surfaces, note it and move on. 

First, however, a review of several Energy related Forums should be conducted and their contributions, if any,
be evaluated and analyzed. 
-------------------- clip -------------------- 
-------------------- paste ------------------ 
=======================================================================   
FORUM:  "overunity.com"  ----- several months study of most active Threads and individual contributers.
Recommendation:    NO FURTHER ACTION BE TAKEN.   Observations and Notes attached.  (Appendix H) 
=======================================================================

FIN   

[Turbo]

Problems hide in the lazyness of people to try something, as well as in the people who claim up front that something shown by another builder can not possibly work for x and y reasons.
There is also an issue with very dedicated builders who have all of the necessary hardware, but who do not know what to build or are working on things that will never work.
Then there are attention seekers for example like BRUC_TPU who have nothing to offer but are looking to stroke their ego's.
Followers should be quick in verification of the proposed method and move on quickly when no positive result has been found.
It helps when the proposed experiments are of a simple nature and the steps to a positive result are presented in a step by step fashion with an endpoint a positive outcome.
The Bit tube can help, because the most promising technique would receive the most donations, but this is still hypothetical, because it could be well the case that charlatans like BRUCE_TPU find ways to inspire followers with fake protocols, caution has to be taken.
As a footnote i can assure everybody here that the positive results, when they surface,will be simple and they can be build, and the technique verified by using simple house hold items.
Cheap prototypes can be build by virtually anyone who wants to give it a go, and when the group of followers grows, development will speed up.
The early prototypes will be mechanical, and about least resistance and very small overhead output, but they will be of utmost importance to have the followers see with there own eyes.
That event is critical, and without it the examiner will move on.
After that stage the mechanical parts will be removed, and the development of the real, more powerful solid state models will surface.
The mechanical prototypes will still be made but merely as a desktop gadget or toy that shows the basic effect.
What happens after that is unknown, There can be build generator buildings that will power the already in place distribution networks, or some company would have to revolutionize the current situation by mass production of stand alone units, prepare for some resistance in that case.