Overunity.com Archives is Temporarily on Read Mode Only!



Free Energy will change the World - Free Energy will stop Climate Change - Free Energy will give us hope
and we will not surrender until free energy will be enabled all over the world, to power planes, cars, ships and trains.
Free energy will help the poor to become independent of needing expensive fuels.
So all in all Free energy will bring far more peace to the world than any other invention has already brought to the world.
Those beautiful words were written by Stefan Hartmann/Owner/Admin at overunity.com
Unfortunately now, Stefan Hartmann is very ill and He needs our help
Stefan wanted that I have all these massive data to get it back online
even being as ill as Stefan is, he transferred all databases and folders
that without his help, this Forum Archives would have never been published here
so, please, as the Webmaster and Creator of these Archives, I am asking that you help him
by making a donation on the Paypal Button above.
You can visit us or register at my main site at:
Overunity Machines Forum



Color's Kapanadze forum, FE builds circuits and comments

Started by AlienGrey, February 03, 2019, 05:22:13 AM

Previous topic - Next topic

0 Members and 17 Guests are viewing this topic.

color

Hoppy :

Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #160 on: October 01, 2012, 12:01:09 PM »

I have attached a scope shot (x10 probe) taken collector to ground of an inverter MJL21194 transistor operating at 4.6KHz.

Current draw - 2.86A @ 12.3V. Output - 111.7V into a 1K resistive test load.

The transformer is a big mains toroid with 2 x 9.4A primaries.

I have used a P6KE30A (30V) transorbs with 33R series resistors for snubbers across C/E of each MJL21194. A smaller 24V transorb with 33R resistor is also fitted across the TL494 supply rail.

There is ringing on the waveform but I'm reasonably happy with it for this application. However, it is clear to me that given that Dally used bipolar transistors for his inverter, with the circuit as drawn, this would have not delivered very much power to a load irrespective of the transformer type. We need to see the full spec on the toroid transformer he used.

Regards
Hoppy

https://overunity.com/12736/kapanadze-cousin-dally-free-energy/msg338456/#msg338456

color

https://overunity.com/12736/kapanadze-cousin-dally-free-energy/msg338657/#msg338657

When Verpies mentions thyristors, the T-1000 (Wesley) tries to divert the point of view to the trolls, like licorice in the drugstore.
Of course, both are conversations without knowing the principle of the free generator.

color

https://overunity.com/12736/kapanadze-cousin-dally-free-energy/msg338754/#msg338754

Vasiliy Buslaev :

Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #228 on: October 04, 2012, 10:10:30 AM »
Quote from: Сергей Ð'. on October 03, 2012, 05:42:41 PM
You may use bigger ring up to 2 cm outer diameter.  Ðœ6000НМ or better.

I do not agree with Sergei, this fundamental error which began to make in our forums. In this scheme, the core must  to work in saturation mode, otherwise the effect DSRDs diode is not going to happen.
It is necessary to use small-diameter ring, as shown in basic scheme, it is 7 mm outer diameter.
In the scheme, sloping line indicates on the  transformer in  saturation mode.
The larger the size of the ring, the more difficult to enter it into saturation.

Quote
Ferrite is going hot so must be sealed or glued on KT926 radiator.
Yes, the ring will heat up, it will need to be glued on the radiator.

Regards
https://overunity.com/12736/kapanadze-cousin-dally-free-energy/msg338827/#msg338827

color

Работа магнитного накопителя с ТЭНами.
https://www.youtube.com/watch?v=CExkHnGWths&t=0s
Эффект независимости.
https://www.youtube.com/watch?v=ya6vaBRO2f0&t=10s

Russians have similar names, so I can't tell who is who.

color

verpies :

Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #230 on: October 04, 2012, 12:10:57 PM »
Quote from: Vasiliy Buslaev on October 04, 2012, 10:10:30 AM

I agree. The transformer method of driving the DSRD requires the saturation of the ferrite core in order to create asymmetrical currents in the forward and reverse conduction of the DSR diodes.
I think that tunning the saturation point of this transformer is tricky.  That is why I prefer the transformerless method of driving the DSR diodes.
https://overunity.com/12736/kapanadze-cousin-dally-free-energy/msg338833/#msg338833


Vasiliy Buslaev :

Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #231 on: October 04, 2012, 12:47:44 PM »
Quote from: verpies on October 04, 2012, 12:10:57 PM
I agree. The transformer method of driving the DSRD requires the saturation of the ferrite core in order to create asymmetrical currents in the forward and reverse conduction of the DSR diodes.
I think that tunning the saturation point of this transformer is tricky.  That is why I prefer the transformerless method of driving the DSR diodes.

You need not reinvent the bike. This scheme works quite good without complicated settings. The scheme was worked out in the Institute of Nuclear Physics, Academy of Sciences of the USSR. The document is in Russian, sorry. If necessary, can translate the most interesting moments.

Regards
https://overunity.com/12736/kapanadze-cousin-dally-free-energy/msg338834/#msg338834





================





And verpies speak of the principle of free-generator resonance.
Verpies quickly unveiled the generator principle and some members were puzzled.


Later, after I realized the principle of the free-generator resonance, I laughed for a long time when I remembered this article.