Reactive Current - Parallel RCL

[nix85]

You said "Reactive energy rise can be converted into real power when there is a source of additional energy." which is wrong cause there are many who used reactive power to do real work. Now you say it is possible but not with ordinary transformer. Well, according to some who did it you do NOT need a special transformer.

Some claim REAL overunity in ordinary transformer just by making primary and secondary resonant (with caps) and then putting the output through another same but non-resonant (no caps) transformer.

There is also Flynn method using magnets to divert lenz and many variations of.

Then there is ferroresonance which is usually a loss, has been a big word in OU community for 30+ years and many had apparently moderate to great success with it.

Remember Don Smith's small transformer which allegedly output about 10kW with 12W input for hours during Tesla tech lecture in 1996. Notice NST is connected to a winding which goes around whole transformer and output is taken from two windings which appear to be normal wound. He clearly says he is using ferroresonance in earlier lecture.

https://www.youtube.com/watch?v=mHhfNjPk7o4

Then we have this example of ferroresonant transformer outputting 100+ Watt from ~10W input Stivep shared. Inventor is using two frequencies, i think 50 and 150KHz.

https://www.youtube.com/watch?v=gbeseiPPCeM

There is also this guy who pumps 2.34kW of reactive power in a big transformer with 105W real input. This should NOT happen according to convention. There is no ZVS here, only passive components, current amplification should produce voltage decrease and vice versa. Yet here we have 130V at 18A.

https://www.youtube.com/watch?v=BVgp-gOBqsg

Etc

[nix85]

The biggest question remains what is with conventional claim that RLC tank cannot amplify power, only voltage or current at the expense of the other, yet i see more and more evidence to the contrary.

Think about it, let's take parallel RLC, let's say Q is 30 and we get x30 current amplification in the tank. According to mainstream voltage in the tank is supposed to go down to 1/30. Hm. How. Half of the time all the energy is in form of electric field in the cap, yet voltage is supposed to be 1/30. Makes zero sense. We got that big x30 current stored in the form of a magnetic field and yet when all this energy is poured into the cap it's voltage is superlow. Remember energy in the cap is CV²/2 and energy stored in an inductor LI²/2. If current is big and voltage low how in the world are they supposed to be equal. So this does not add up. Another thing, parallel RLC at resonance has great impedance, theoretically infinite, HOW could it provide resistance to the driving circuit if it's VOLTAGE was not at least equal to it. Obviously if it was any less, it would not be as an open circuit, yet it is, cause parallel RLC is a band stop filter.

I am waiting for my new multimeter and pocket oscilloscope to arrive. This has to be checked.

[nix85]

I have on previous pages and other threads here already shared that there is a secret very advanced space program. No need to repeat that they been on the Moon at least since late 50s with man made saucers etc. Here is another report along the lines.

In December, 1999 (on a Monday - actual date not known),
Engineer Jeremy Clark Packer working with several coworkers
on an oil rig about 30 miles offshore in the Gulf of Mexico near
Corpus Christi, Texas, saw at about 8 p.m. a UFO (or USO)
emerge from the sea. It was calm with no clouds. The UFO
was sighted for about 30 minutes during which time a rumbling
sound was heard and their watches stopped working!There
were no alerts to military maneuvers but out to the west they
saw 25-30 helicopters on maneuvers. Packer describes what
happened next. "All of the helicopters stopped in mid-air, and
something large - very large - surfaced beneath them. "It was a
huge metal object, about the size of our platform! It just came
straight into the air! It hovered over the helicopters for about
two minutes - enough for us to use the telescopes to check it
out!
"It was as large as about two football fields, concave
underneath, with four large bulbous domes in the concave part
of the bottom of it.
"It turned on its side and we saw that it looked like a huge
flying cigar which was tapered at both ends. On the top of the
thing was another concave indent that had lights circling within
in - every color you could possibly imagine! It was beautiful!
We heard the soft rumbling all throughout the sighting.
"Then something amazing happened as we stood there in
disbelief. Like someone turning off a light switch, it was gone.
One second we were all looking through binoculars, telescopes
and through just our eyes. ... It was close enough you didn't
need the devices! Then it was gone...
"The helicopters headed our way and passed us overhead,
again never making a sound. We could see that they had
absolutely no markings. Familiar with the stuff the military
does around here, we knew they weren't military craft. Some
looked like they were stainless steel, almost invisible; some
were jet black." (NEXUS NEW TIMES, Vol. 5, No. 4,
June/July, 1998, "The Twilight Zone: Huge UFO Emerges
From Sea Near Oil Rig," pp 53-54. Emphasis in the original).
All 250 members of the dayshift crew witnessed this. They
noticed afterwards, their watches were all 30 minutes later than
the actual time when they returned to the mainland. One other
curious and astounding fact: The bore that is used on the oil rig
to drill holes in the ocean floor is 140.65 feet thick, solid steel.
It was bent into a V shape!

More in the book THE APOCALYPSE UNFOLDS by Diamond Star
PDF available for free online

[hermesatar]

Hi nix85,

"When resonance occurs in a parallel RLC circuit, a local current circulates between the inductor and the capacitor. This current can be very high, while the circuit current as seen from the source can be low."

Now I have made the first schematic of Hermes RLC-amplifier: It has a squarewave adjustable frequency generator and a constant current transistor. The transistor will be on when 4 is high and off when 4 is low. The 2k2 resistor is a current limiting resistor. The 100k potentiometer adjust the frequency. C Hertz capacitor alternativly charge and disharge. A big capacitor lower the frequency, while a small capacitor increase the frequency.

The transistor can be any small signal transistor with a safe output power of 625 milliwatt. The 22 ohm is a current limiting resistor limiting the transistor collector current to 0.75 Volt/22 ohm = 34 milliampere. The potentiometer that is connected between the 22 ohm resistor and the transistors emitter can be of any value. The higher value the less collector current. The transistor maximum output power is 9 Volts*34 milliampere = 300 milliwatt. The primary [/size]output between the collector and +9 volt source can be short circuit without burning the transistor. Also the secondary of the transformer can be short circuit without burning the transistor.

I see that [/size]Hermes RLC-amplifier can be used for three things. First find out if there is any larger current circulating between the capacitor and transformer in the RLC circuit. Second a frequency generator for free energy studies and third as a tester for suspected malfunctioning transformer.

[/size]Best Wishes, Hermes[/size]
[/size]http://gratisenergi.se/RLC-amplifier.jpg[/size][/size]

[nix85]

@Hermes

I seen you asked the same question about ZVS induction heaters on energetic forum. No one replied you for a reason, that source you quoted is false. Loading the circuit dampens the resonance and causes input to increase proportionally.

As for your schematic, i am not sure what you imagine to achieve. RLC amplifiers are an old and common thing, for example below is shown parallel RLC as part of intermediate frequency radio amplifier, RLC increases the gain at the resonant frequency because gain of a common emitter stage is proportional to RL/RE.