Holcomb Energy Systems:Breakthrough technology to the world

[onepower]

bistander

Hubbard device, interesting. Something like this, I presume.

No, that is fake 2nd and 3rd hand information which bears little if no resemblance to the actual device by the inventor

Any proper investigation must obviously start with the real inventor. All the inventors work, there history and associations, actual photographs, patents and sketches. 99% of what you see on the internet is usually misguided opinions, fake or misdirection. In fact, people not seeking credible facts from the real inventors is why 99% fail.

If you read the literature about what Hubbard actually claimed he had an outer solenoid winding, 8 inner solenoid cores switched individually, sequentially through an old 8 cylinder ignition distributor and an inner iron solenoid core. Contrary to the misinformation being peddled the input was not AC but switched DC producing an AC output.

For example...
http://rexresearch.com/hubbard/hubbard.htm
This webpage looks credible but realistically most of the information is 2nd or 3rd hand information and not correct. The supposed radioactive material narrative requiring radium was misinformation by the oil owned shell company which bought Hubbard's patents. There was no radioactive material used in the device and none is needed. It's also kind of comical that Hubbard was a basically a teenager when he invented the device. As the story goes, Hubbard was a bellhop for the hotel where Nikola Tesla was living and received the information from him.

AC

[SolarLab]

From some old notes:

LinGen Physical Structure with B and H Fields
LinGen Simplified Block Diagram

> Simplified_LinGen_BLOCK_DIAGRAM - for reference (attached) {472KB}
------------
LinGen Rotor and Stator Side View

> LinGen_Brassboard_SideView_RotorTop_StatorBottom (attached) {155KB}

LinGen Rotor (top) and Stator (bottom). Gray is Magnetic Metal,
Copper is Wire Coils and Lap Winding.
Eight poles per module are shown. Four North and four South.
Either group can be North or South or both per design requirements.
Rotor has individual driven Wire Coils for each Pole. Phased as required.
Stator is Lap Wound - N1 to S1, N2 to S2, N3 to S3 and N4 to S4.
---------
This gif viewer is good for stopping or slowing the animation:
https://sourceforge.net/projects/gifviewer/

=========== new post ========= due forum limits =======

Sliding Magnetic Field Intensity (Amp/m) depicting intensities seen by the Lap Winding.
The field is created by the Rotor Poles via their individual Wire Coils (N x 4 and S x 4).

> Magnetic Field Intensity - 2_Animation_0-17 (attached) {3319KB}
---------
=========== new post ========= due forum limits =======

Magnetic Field Roll (only 4 Poles out of the 8 Poles are shown)B-Field eminating from the Rotor Poles and Coil Windings (only 4 shown).

> Bf-Zp-CS-b_HES_LinGen_4Coil-ST37_03LO_01 (attached) {510 KB}

B-Field Saturated - shows the rolling magnetic field more clearly (only 4 poles shown).

> Bf-ZXmid-Cont_HES_LinGen_4Coil-ST37_4msON-Time_1ms_SeqLO_01 (attached) {1276 KB}

----------
This gif viewer is good for stopping or slowing the animation:
https://sourceforge.net/projects/gifviewer/

Looks like you have to open the "Simplified_LinGen_BLOCK_DIAGRAM.gif" seperately

[SolarLab]

Sliding Magnetic Field Intensity (Amp/m) depicting intensities seen by the Lap Winding.
The field is created by the Rotor Poles via their individual Wire Coils (N x 4 and S x 4).

> Magnetic Field Intensity - 2_Animation_0-17 (attached) {3319KB}

SORRY - now I remember why I never posted the LinGen stuff here - animated gifs, etc. won't work

       

Anyway, most of this is posted on OUR.

[SolarLab]

again - no go...
Oh well... Hard to show the interactions if they can't be
shown through animations.

Anyway - its long past time to get the website completed and
open sourced to the public internet!

[Dog-One]

I respectfully request to anyone who is successful building some sort of HES derivative, please create a torrent with all pertinent information and share the link on this thread.  I will most certainly make sure it is well seeded for others.