Holcomb Energy Systems:Breakthrough technology to the world

[listener192]

In the initial build all the coils are wired in series, with 6 coils forming a pole at a 6 slot winding pitch, as per Pierres diagram of this.


This was the original switch sequence I used.




digitalWrite(1,HIGH), digitalWrite(13,HIGH), digitalWrite(25,HIGH);   // turn the LED on (HIGH is the voltage level)
  delay(x);              // wait for a second
  digitalWrite(2,HIGH), digitalWrite(14,HIGH), digitalWrite(26,HIGH); // turn the LED on (HIGH is the voltage level)
  delay(x);              // wait for a second
  digitalWrite(1,LOW),  digitalWrite(13,LOW),  digitalWrite(25,LOW);     // turn the LED off by making the voltage LOW
  delay(x);              // wait for a second
  digitalWrite(3,HIGH), digitalWrite(15,HIGH), digitalWrite(27,HIGH);   // turn the LED on (HIGH is the voltage level)
  delay(x);              // wait for a second
  digitalWrite(2,LOW),  digitalWrite(14,LOW),  digitalWrite(26,LOW);     // turn the LED off by making the voltage LOW
  delay(x);              // wait for a second
  digitalWrite(4,HIGH), digitalWrite(16,HIGH), digitalWrite(28,HIGH); // turn the LED on (HIGH is the voltage level)
  delay(x);              // wait for a second
  digitalWrite(3,LOW),  digitalWrite(15,LOW),  digitalWrite(27,LOW);     // turn the LED off by making the voltage LOW
  delay(x);              // wait for a second
  digitalWrite(5,HIGH), digitalWrite(17,HIGH), digitalWrite(29,HIGH);   // turn the LED on (HIGH is the voltage level)
  delay(x);              // wait for a second
  digitalWrite(4,LOW),  digitalWrite(16,LOW),  digitalWrite(28,LOW);     // turn the LED off by making the voltage LOW
  delay(x);              // wait for a second
  digitalWrite(6,HIGH), digitalWrite(18,HIGH), digitalWrite(30,HIGH); // turn the LED on (HIGH is the voltage level)
  delay(x);              // wait for a second
  digitalWrite(5,LOW),  digitalWrite(17,LOW),  digitalWrite(29,LOW);     // turn the LED off by making the voltage LOW
  delay(x);              // wait for a second
  digitalWrite(7,HIGH), digitalWrite(19,HIGH), digitalWrite(31,HIGH);   // turn the LED on (HIGH is the voltage level)
  delay(x);              // wait for a second
  digitalWrite(6,LOW),  digitalWrite(18,LOW),  digitalWrite(30,LOW);     // turn the LED off by making the voltage LOW
  delay(x);              // wait for a second
  digitalWrite(8,HIGH), digitalWrite(20,HIGH), digitalWrite(32,HIGH); // turn the LED on (HIGH is the voltage level)
  delay(x);              // wait for a second
  digitalWrite(7,LOW),  digitalWrite(19,LOW),  digitalWrite(31,LOW);     // turn the LED off by making the voltage LOW
  delay(x);              // wait for a second
  digitalWrite(9,HIGH), digitalWrite(21,HIGH), digitalWrite(33,HIGH);   // turn the LED on (HIGH is the voltage level)
  delay(x);              // wait for a second
  digitalWrite(8,LOW),  digitalWrite(20,LOW),  digitalWrite(32,LOW);     // turn the LED off by making the voltage LOW
  delay(x);              // wait for a second
  digitalWrite(10,HIGH), digitalWrite(22,HIGH), digitalWrite(34,HIGH); // turn the LED on (HIGH is the voltage level)
  delay(x);              // wait for a second
  digitalWrite(9,LOW),  digitalWrite(21,LOW),  digitalWrite(33,LOW);     // turn the LED off by making the voltage LOW
  delay(x);              // wait for a second
  digitalWrite(11,HIGH), digitalWrite(23,HIGH), digitalWrite(35,HIGH);   // turn the LED on (HIGH is the voltage level)
  delay(x);              // wait for a second
  digitalWrite(10,LOW),  digitalWrite(22,LOW),  digitalWrite(34,LOW);     // turn the LED off by making the voltage LOW
  delay(x);              // wait for a second
  digitalWrite(12,HIGH), digitalWrite(24,HIGH), digitalWrite(36,HIGH); // turn the LED on (HIGH is the voltage level)
  delay(x);              // wait for a second
  digitalWrite(11,LOW),  digitalWrite(23,LOW),  digitalWrite(35,LOW);     // turn the LED off by making the voltage LOW
  delay(x);              // wait for a second
  digitalWrite(12,LOW),  digitalWrite(24,LOW),  digitalWrite(36,LOW);     // turn the LED off by making the voltage LOW
  delay(x);              // wait for a second

[listener192]

I would like to provide more but I dont seem to reliably post messages with attachments

[Ufopolitics]

...

[listener192]

Wired like this

[Ufopolitics]

Ok, thanks L192,


I finally understood how Pierre wired his setup...


I see a lot of problems in that design...from the winding of the coils (stepping down by one slot), to the way he is switching coils.


Now I realize why his setup caught on fire.


He has too many relays per group of 6 or 4 coils, as I understand now, what he meant by "isolating" the coils, or the magnetic fields...


Poor relays, they were getting super high reverse currents at all times...very hot inside contacts!!...maybe not reflected high temp. on their outer casing...




I finally understand what has happened here...




I will go in detail tomorrow, as I will have to make some graphics for better understanding.




And I rather open a dedicated thread just to go over this setup in detail, not to keep over populating this Thread here...






Regards








Ufopolitics