Holcomb Energy Systems:Breakthrough technology to the world

[TommeyReed]

SL,

"How well do you know "Bob Walker?"

I don't care if its Donald Duck, anyone can make claims and sell anything.

Until a real system can be tested by independent companies in the USA, I would be very caution of investing any money is these claims.

You would think by now, companies like Tesla would love to have these magic motors/generators in their cars and run for ever if the claims of 4:1 efficiency was true.

My own opinion is the facts that it doesn't work with people who got a unit as claimed, so I would stay far from this investment.

Sl, you are a Salesman. But what are you trying to sell?

No unit to show off!
Funny videos!
Funny data!
Funny math!

You have nothing SL, integrity must not be your cup of tea!

At least a car salesman, can show off a car to sell!

Tom

[rakarskiy]

You would think by now, companies like Tesla would love to have these magic motors/generators in their cars and run for ever if the claims of 4:1 efficiency was true.

When Musk got involved in the electric car project (he wasn't the author), he was trying to get Joe Flynn's engine-generator for the electric car. He was quickly told by the system what he could and couldn't do. That's the kind of insider info back in the day.

https://rakatskiy-blogspot-com.translate.goog/2023/05/blog-post.html?_x_tr_sl=ru&_x_tr_tl=en&_x_tr_hl=ru&_x_tr_pto=wapp

For example, I had information about Konilov's project (similar system to Joe Flynn), unfortunately both of them are no longer there, for very strange reasons. But such systems, both in the USA and in the USSR, were produced and used (all of them still are) in the defense industry.

https://en.wikipedia.org/wiki/Flux_switching_alternator

A flux switching alternator is a form of high-speed alternator, an AC electrical generator, intended for direct drive by a turbine. They are simple in design with the rotor containing no coils or magnets, making them rugged and capable of high rotation speeds. This makes them suitable for their only widespread use, in guided missiles

it was written for losers.

It's hard to convince a naive person.

[stivep]

Tommey,
SO LET'S SEE YOUR Excess Energy DEVICE(S)!
We're all waiting...  I'm sure your device can do a lot better than the ILPG, s

Tommey looks to me  honest, natural, traditional in value , familiar with  some classical physics guy.
   who thinks that he is fair to you and  the audience.
       No access of energy devices by Tommy nor his such claims are  known to me.
           So he doesn't need to have one  nor present it to you

________________________________________________________

"open source", "no cost to build", and "no cost to install" with a 5 year
warrantee and free delivery.  Please include a link where we all can order one.

"open source" doesn't do manufacturing .
              "open source" is a platform not  entity.
                     and that is why  it will not deliver  stated by you device.

________________________________________________________

Here's a link where Gene is making measurements on the "ILPG Unit (not looped):"
https://vimeo.com/user81692192  [upper left video] 
Your saying it doesn't work does NOT make that a true fact, based on all the evidence against your claims.

I see a guy having access to Holcomb facility and his equipment.
   This guy is familiar with  the device its concept its futures and we are not.
      I see some talking to the camera guy holding some instrument connected to wires of  "invisible"
         - non presented  in video device.
             I'm not saying that he is a liar  or not.

So the guy is likely trusted  and/or payed  by Holcomb to talk, act, and make videos.
   However  that video is 11 months old and in that folder, since than there was not a single video  made.
      Wesley

[SolarLab]

In General:

Tommey - So, based on your answer, I'll assume, you do know Bob Walker and, likely, may have been
working with him. That would explain your bitterness. Sorry it didn't work out.


Stivep - A while back UFOPolitics worked on a similar (HES like) device and showed several videos and
posted other information where, if I recall, he had achieved a >2 COP. There isn't any recent information
that I can find. He may have achieved success and, thus, stopped posting on OU (not that uncommon).

Also; it appears that on another forum (Aboveunity.com) a member recently posted a device that might
be similar to the "LinGen" where he claims a COP = 2.56. He claims to have had a Metrology Lab test
it as well. See Below:

Aetherholic COP_2.56 Device Description (Brief - as presented)

https://www.aboveunity.com/thread/aetherholic-s-cop-2-56-device-test/?order=all#comment-d8a09194-7010-4301-98b9-b059003cee8c

Approximate measurements and specifications (according to the Designer)
[see attachment]

This device was posted about 6 days ago (03 Aug 23) by a poster known as
Aetherholic claiming a COP of 2.56.

Some details were given as follows:

- 16 bit 2 channel Arbitrary Function Generator set to Square Wave 11.4 Khz 15% duty 10V
- Metglass core and took 3 days to build
- 2 x 100W 230V bulbs in parallel to act as a load
- Input power 23.55V x 0.04A = 0.942W
- Output power 11.6Vrms x 104/500 Arms = 2.4128W
- COP = 2.1428/0.942 = 2.5614

Aetherholic advises that the device was tested at a National Institute of Metrology in an
attempt to validate the measurements an obtain a report and certificate.

Unfortunately, to date, for a variety of reasons, a report and certificate were not acquired.

At this point I have no reason to doubt Aetherholic's claims. Here's why:

Aetherholics device appears to physically mimic the original (WAG) LinGen dimensions
COP-2.56 [L ~ 4.54", W ~ 2.55", H ~ 0.9"]; LinGen [L ~ 5", W ~ 3", H ~ 0.5"]. The COP-2.56
extra height would easily enclose the uprocessor, drivers and FETs.

The COP-2.56 Device performance characteristics also closely match the original LinGen.

Unfortunately, to date I have not found anything similar on this Forum.

Have a good one,

SL

[SolarLab]

LinGen Dimensions

Just noticed the "LinGen Simplified Schematic" diagram does not contain the dimensions.
These dimensions, along with some other information, are found in the "Caution Notes"
attached below:

SL

NOTE:
Development of the LinGen begins by performing a Numeric Analysis of the
methods and techniques involved. These are found in Dr. Holcombs patent
WO 2018/134233 A2 found here:

https://patents.google.com/patent/WO2018134233A2/en?oq=wo2018134233

The Analysis begins here, although there are a lot of other posts to sort through;
the main informational ones are found under "solarlab." These include a lot of
support technical information as well as some Computer Aided Engineering
animations:

https://www.overunityresearch.com/index.php?topic=4261.msg98509#msg98509

Hope these help a bit!