Overunity.com Archives is Temporarily on Read Mode Only!



Free Energy will change the World - Free Energy will stop Climate Change - Free Energy will give us hope
and we will not surrender until free energy will be enabled all over the world, to power planes, cars, ships and trains.
Free energy will help the poor to become independent of needing expensive fuels.
So all in all Free energy will bring far more peace to the world than any other invention has already brought to the world.
Those beautiful words were written by Stefan Hartmann/Owner/Admin at overunity.com
Unfortunately now, Stefan Hartmann is very ill and He needs our help
Stefan wanted that I have all these massive data to get it back online
even being as ill as Stefan is, he transferred all databases and folders
that without his help, this Forum Archives would have never been published here
so, please, as the Webmaster and Creator of these Archives, I am asking that you help him
by making a donation on the Paypal Button above.
You can visit us or register at my main site at:
Overunity Machines Forum



Holcomb Energy Systems:Breakthrough technology to the world

Started by ramset, March 14, 2022, 11:07:24 AM

Previous topic - Next topic

0 Members and 15 Guests are viewing this topic.

rakarskiy

Quote from: TommeyReed on August 21, 2023, 07:09:18 AM
https://overunity.com/19069/holcomb-energy-systemsbreakthrough-technology-to-the-world/msg581453/#msg581453

With all due respect ..., I owe no one anything. Holcomb's converter is workable for the СOP>1 result, but there are technical peculiarities of replacing the mechanical electromagnetic rotor with a solid-state rotor, according to Holcomb's version. Holcomb declared that he, can in the traditional synchronous three-phase generator replace the traditional electromagnetic mechanical rotor with his solid-state rotor and start the generator in work. Yes it is possible, but with one reservation that the primary magnetic flux of the solid state rotor will be less than that of the traditional rotor. To understand this it is enough just to study the course of higher school in the direction of design of electromechanical devices. In the direction of calculation of magnetic circuits of electromechanical devices.  This says a lot about the quality of performance.  I have no sense to prove anything to anyone, all that I wanted I indicated in my posts.

No offense, but you remind me of a character who came to the store to buy a gasoline generator.  And he needed a constant load of 3 kW. Looking at the samples on display, he saw a discrepancy Nominal power -2.3 kW and maximum 3 kW, for a lower price than a generator with a nominal power of 3 kW (maximum power of 3.92 kW). He approached and asked the sales assistant if the generator with a rated output of 2.3 kW would work with a connected load of 3 kW.  The consultant answered in the affirmative, noting that such a mode is considered to be marginal and not desirable, plus in this mode will increase fuel consumption. The customer was satisfied with the answer, purchased the generator and needed to connect a 3 kW engine.  The mode of operation of the load (engine 3 kW, was periodic with starts and stops), that is, at the time of starting the motor will require starting power. A week later the buyer came to the store with claims that the generator was out of order and constantly overstressed when connecting the load. After reviewing the circumstances of the case, the store owner denied the buyer's claim. Since the inrush currents were constantly affecting the generator winding, the fuses were blown, which the buyer replaced with more powerful ones, and as a result the winding overheated and failed.  Thus, the rules of operation were violated, the fault of the buyer who wanted to save money on the price of the generator and still did not have sufficient knowledge for operation. So I do not feel sorry for this buyer, on the contrary, it is well worth it to him.  A stingy fool has to pay twice, once for his training, through the loss of his money. To do something you need to learn, and the one who does not want it as just like I described above.

Before you invest in anything, you should at least be knowledgeable about it.

lancaIV

For me unknown : STH Technologies
https://sth-technology.ru/index.php?id=nasha-kompaniya
In 2011, the technology was presented at a scientific conference in Hanover, dedicated to the  Free Energy subject, where it was highly appreciated.

Really quiet from 2023 standpoint !

But by the Hannover conference pictures to see and read : Steho

Okay,  https://overunity.com/17446/steho-energy-saving-system/
Progress since theretime ,2017  ?

Somebody who claims instead 600 Km a 4000 Km drive range enhancement and stays unknown,by not claim open demonstration ....,
https://sth-technology.ru/index.php?id=auto01


wmbr
OCWL

rakarskiy

Quote from: lancaIV on August 21, 2023, 10:29:17 AM
For me unknown : STH Technologies
https://sth-technology.ru/index.php?id=nasha-kompaniya
In 2011, the technology was presented at a scientific conference in Hanover, dedicated to the  Free Energy subject, where it was highly appreciated.

Really quiet from 2023 standpoint !

But by the Hannover conference pictures to see and read : Steho

Okay,  https://overunity.com/17446/steho-energy-saving-system/
Progress since theretime ,2017  ?

Somebody who claims instead 600 Km a 4000 Km drive range enhancement and stays unknown,by not claim open demonstration ....,
https://sth-technology.ru/index.php?id=auto01


wmbr
OCWL

Stepanov was very specific in stating and demonstrating his power increase devices. Meaning resonant. I came to the conclusion that he managed to turn a transformer into a generator.
https://rakatskiy.blogspot.com/2022/12/blog-post.html?m=1

By the way Stepanov (STECHO laboratory) where he presents a power amplification unit allowing to save up to 50%

https://www.youtube.com/watch?v=5kOVMUloBXI

QuoteOur REM (Regenerator of Electric Power) unit allows you to reduce electricity consumption by more than 50%. You can imagine what this means for business. The unit is already in operation not only in Russia, but also in the Czech Republic, Germany, Slovenia and other countries. The unit is patented and certified in Russia and EU countries. It can be used in a wide range of businesses: from large enterprises to gas stations and greenhouses.

(video dated 4 years ago)

This video is from a very long time ago https://youtu.be/fDRTdTJTgGc?list=PLRYhzUMB2BkK-tcJrOj950naG1It7I2kf

12 years ago, where Stepanov demonstrates power amplification. Measurement, two electric meters at the input to the converter and at the output before the load. This method of measurement is the most correct - Quantitative.

Attached is a picture of the STECHO regenerator they installed at the mining farm. (photo from a guy who was there) he said that the input consumption is 6 kW and the output is 17 kW. I can neither confirm nor deny it.  I know the guy virtually and for a long time, he will not make it up for sure, he does not need it. That's why by external signs my opinion is that just the transformer is switched to generator mode.  Фотография и посещение сделаны 4 года назад.


Goat

Quote from: TommeyReed on August 20, 2023, 08:58:35 PM
Goat,

First of all I don't know a Bob walker or even care who he is.

Just because I didn't answer someone question , doesn't mean I know that person.

I have a few friend who Visit Holcomb in Florida, this Bob Walker I don't know.

I look at the facts and was ask to looking into Holcomb claims. After just a little research BS meter started to go off.

Nice try Goat, but I have more integrity then your buddy SL.

It's just a matter of time people will want their money back, did you invest or are you like SL collecting investment on a unproven claim?

I answer your question, now answer mine, are you a investor or selling false claims?

It seem like many people on this forum has been pushing Holcomb device like they know him. Are you a salesman or a investor GOAT?

Tom
Hi Tom
I'm sorry but you seem to have misinterpreted my post, I used the quote function from a post by SL to ask a question, not to get involved in your above flame war with SL.

To repeat, my question was:

@ SL

Is the above Aetherholic COP_2.56 Device Description in a thread on a forum that describes the materials and circuit to achieve this?

Is it based on Holcomb or something else?

Tom, if you can delete your above post it would be greatly appreciated as it makes me look like an antagonist to the FE community which I assure you I am not.

Thank you