Working Kapanadze Generator Circuit!

[pix]

Do you remember Herman Plauson devices ?  Between ground and elevated capcity there is potential capable of generating current. I think  Tesla , Kapanadze and others created antenna replacing elevating capacity to attact ground electrons (or rather free electrons in metal at ground potential) to "think" they are attached to highly elevated capacity. So yes, energy does not come from ground but ground is required. In fact Tesla said it clearly in his article from 1900, and even posted analogy descibing process of obtaining energy at the "faster rate". This method is not different then heat pump.
Statement : Of course those are only theoretical divagations

Hi Forest,
1. I you create high positive potential  , that potential attracts ground electrons. That's why in Kapanadze and other replications  there is a Tesla Coil part to create HV, and there is spiral antenna wrapped losely AROUND "grenade" coil. Very high potential electric fields generated by "antenna" acts on "grenade coil". Why "grenade" is wound this way I am not sure 100% but I guess it is to minimise inductance because "antenna" action on the "grenade coil" must be electrostatic not magnetic.


2. Another thing regarding a "heat pump analogy" - I totally agree. I imagine Tesla Coil and COP>1 devices by a "heat pump " analogy: converting not so useable low grade "ambient" energy into "high grade" useable energy.
Tesla coil is a slow wave helical resonator, in it's resonant freguency secondary coil ACCUMULATES incoming energy. With every incoming impulse from primary- wave amplitude in secondary rises: 1,2,3,4,5,6....  At  the same time energy accumulated in secondary increases squared: 1,4,9,16,25,36  It is expotential rise of electromagnetic energy accumulated in Tesla secondary. The results in enormous reactive enegy , high potentials on top of 1/4 wave resonator and high currents on ground point. Imagine enormous Poynting Vector enerygy flow on Tesla secondary.
To get a "heat pump" result- we need to unload periodically that accumulated energy into "stepping voltage down" device.  Through rotary spark gap like in Turkish video, or "Kapanadze" way- by antenna acting on some kind of "grenade coil".
All we need is to tap to some electromagnetic wave of certain frequency F1, addjust Tesla resonator to that F1 frequency and unload accumulated energy periodically with frequency F2<<F1.
It could be a radio  wave, Schumann wave or- as in typical Tesla : LC tank circuit
Lower frequency minimises radiative losses from Tesla resonator.
Those are my thoughts on Tesla, Kapanadze and derivatives.


Cheers,
PiX

[worldcup]

   Guys:
   With or without a schematic, no one has been able to replicate any of Kapanadze's devices. That is why there is no verifiable open source information on it. And his patents don't explain enough of just how to build it, either.
   That is also why Akula started his own versions of the original Kapanadze self running   device. Which were later replicated by Ruslan, and then later by Stalker, and also by the late Andrian Gustav, who is now dead.
  I don't think that the schematic above is from a Kapanadze device. As Tariel could not build such a circuit, nor could his son.
  Concerning the Earth ground line, keep in mind that Akula showed his second self runner operating without an Earth ground, for a while. But, overheating of the device was his issue to deal with, without using a ground connection on the circuit.
He showed that is was possible, though. As well as proving that the extra energy does NOT come from the ground.
Yet Earth grounding is needed for maximum gain, and to help keep the device from overheating.

  If any of you are going to be replicating the above posted circuit, you're going to need more than just some luck, in actually getting it to work, and self run. Replicating these types of devices, is not for the faint of heart, or impatient builders, with no test gear.

   NickZ

  That is also why Akula started his own versions of the original Kapanadze self running   device. Which were later replicated by Ruslan, and then later by Stalker, and also by the late Andrian Gustav, who is now dead.

'Akula', 'Ruslan', 'Stalker' Are this buddies registered here! someone got any way to reach them to share their thoughts in this thread!

I don't think that the schematic above is from a Kapanadze device. As Tariel could not build such a circuit, nor could his son.

I think ,i read somewhere here, some guy shown them device in some aviation hanger and someone tried to steal his design, who?tariel or taimur ? sorry, if i'm mistaken ,i dont wont to blame anyone.
Regards

[NickZ]

'Akula', 'Ruslan', 'Stalker' Are this buddies registered here! someone got any way to reach them to share their thoughts in this thread!
I think ,i read somewhere here, some guy shown them device in some aviation hanger and someone tried to steal his design, who?tariel or taimur ? sorry, if i'm mistaken ,i dont wont to blame anyone.
Regards

   worldcup:  Please remember that you are new here on this forum thread, and if you don't know or haven't heard of Akula, Ruslan, nor Stalker, and their shown self running devices, you have much to learn. No, they are NOT members here, nor can they be easily reached, and they have most likely all been warned to stop, or else. No joke...
   
   This thread is about a working Kapanadze circuit. The only "working TK devices" are the ones shown by Kapanadze himself. Yet, there are many similar type of device replications made mostly by Slavic people. Not all are shown, nor will be shown self running any more. Due to the above mentioned threats.
   These are serious devices, not to be taken lightly for various reasons. As they also have been associated with UFOs power systems, antigravity, and other electromagnetic anomalies. So, we also have lots to learn... while the various governments are trying hard to keep all this a hidden secret, as long as possible.  That is why there is so much mystery behind free energy, and self running devices. And is still something that none of us on any of these forums have been able to show working and self running. Most input to output readings are false, with these types of devices. And so, these types of OU readings are practically impossible, and will not provide us with actual and accurate details. At least not yet...Therefore, self running devices are what are really needed, and not more theories, and input to output tests, as some kind of proof.
   worldcup, please limit and resize your attachments to less that 960 pixels wide, or you mess up the width of this page, like it is now.The page will reset by itself to the correct dimensions, once it gets to the end of this current page.   Thanks,
               NickZ

[forest]

.

[worldcup]

any inputs ? not even close to BTG!

any inputs  on this attached circuit from ikako chubinidze video ?

anyone could translate!