Mosfet Capacitor Dump Experiments

[Dave Wing]

Why I'm so anal over the cap dump method is simply because a video from dr peter Lindemann on Aaron Murakami book site states that john Bedini was only able to get perpetual motion or near if you want to consider years of operation from the same battery bank. Was using cap dump methods, He admits on the site from one of the conference video's that John was only able to produce these effects with cap dumps, But later on when it came to charging a separate industrial battery bank of like 48 volts, It was much better to use the radiant directly. But this was not a setup for "Self running" Just charging an isolated bank.  It seems from the various insinuations around John did that way back in the day with the original gravity wheel and got "bored", As in the perpetual stuff. Personally I think the idea of a motor self operating and able to do moderate work at the same time (the cromley or how ever its spelt motor) for example is a better deal for the general user, Where you have this thing that self runs and you get to use a few watts to drive a small lamp without draining the battery etc.. vs trying to charge industrial 48 volt banks. Not everyone has that setup or is it practical or portable for real world use. I wonder why john stepped away from what I think is the much better achievements.


Hey Joel

Hope you are well

I think John realised that what he had was around 98 or 99% efficient.  After years of claiming OU he would be a fool to suddenly change his tune, very much like vegetarians that claim awesome health but then after 2 years of eating too clean, they realize they have nutrient deficiencies an\d have to go back to some animal products to get whats needed.

Look....I always play devils advocate and look fair on both sides.  Im a genuine researcher and engineer.  99% efficiency IS amazing and looks OU.  Hell its better than any tech thats currently out there.  But the world and money doesnt work that way.  Most appliances are super crap and wasteful and the energy companies love that.  They dont want to rebuild everything and have us use less power.

Then theres the University stale boffins that refuse to believe that there can be something better.  Fact is there are ways to draw energy from elsewhere but the system is dead against it for now.  So what happened with Rick and John is they realized they didnt have enough and needed to shoot for the stars- which they NEVER ever were going to do with rotating battery banks.  Instead they just went to energy conferences and talked pseudo nonsense and took handouts.  Whats worse they purposely posted rubbish schematics that kept people away from what they had.  If they had just shared then smarter minds combined would have perhaps helped out.....but hey after that nobody would come to their energy conferences anymore either would they!!    Lindemann was useless also and he perpetuated the lie.

  They also took payments for machines they never delivered.   +Fraudsters

They were not fraudsters what they did was play the game by giving little bits of information here and there and then watch to see who could take those bits and turn them into a working machine that would run it's self plus produce power. John's ferris wheel was his final example of all his work, it was a big example of a free energy machine that Bearden talked about in video nine of Energy from the Vacuum series at the 23:32 mark. Not many know what John was displaying in that machine that had the three inductors. John also talks about it on Bill Jenkins old radio shows, he tells Bill he has the three coil system in use way back then. The zero force motor also produces a similar result as the ferris wheel.

Erfinder who frequented many of these forums back in the day shared quite a bit of insight into his research into Johns Ferris wheel and zero force motor. These machines are very low drag in operation.

What many miss is that a pulse motor that harnesses the coil collapse will never be more out than in until you install extra low drag generating coils that are used to put the machine over the top. Peter Lindemann also has demonstrated such a machine it had 4 low drag generating coils and two power coils , it also had the three battery system battery swapper attached to it. As I see it you do not need the three battery system to produce the results of more out than in. Peter could have added more low drag generating coils until he had more out than in. As Peter said that machine he made was flea power, it was gutless for lack of better wording.

It is the principle of the devices which should be looked into, John and Peter were trying to tell you with out telling you. It may have been a game to see who could figure it out, but when you really look at it who out there in the free energy community has offered you more than them? It takes real work and perseverance to succeed in this field. They were not going to just hand it all over to everyone for free.

Paul Babcock, Jim Murray, Toby Grotz etc. also have revealed excellent information that will help the serious experimenter. I believe every pulse driven motor must be looked at as what it is and that is they are motor generators that do return the feedback to the front end battery and also to the secondary battery or capacitor. It is not over unity until you add in extra low drag generating coils. All the greats had motor coils and feed back coils (generating coils) on their machines, the two go hand in hand.

Dave Wing

Both John and Peter claimed the SG was upto 95% electrically efficient with 28% mechanical output if you built it right. I never have heard them say anything more than this, except for the Ferris Wheel machine which I was told indirectly it was 350watts over unity.

[SkyWatcher123]

Hi all, Hi erfandl, i will get to work on drawing the capacitor dump circuit i am using.
Hi joellagace, good thoughts you are sharing, i appreciate the work you are doing.
I think the good effects in these capacitor dump devices, are caused by things similar
or equal to, the electret effect.
An electret effect, is seen in the dump capacitor, due to the impulsing, and is most likely
also occurring within the charge battery.
With proper tuning (ultra sharp impulses) and the lowest possible load resistance, (it is
why Bedini used those
gigantic telephone batteries, because they had ultra low resistance, as do ultra capacitors)
super charging effects can happen.
peace love light

[SkyWatcher123]

Hi all, here is the mosfet cap dump circuit, at the moment.
peace love light


https://i.postimg.cc/hjDgvw73/Mosfet-Capacitor-Dump-Circuit1.png

[joellagace]

Here is another method I found works well for charging capacitors if you have the luck of being able to put up some sort of outside rx antenna,

Here it is working: https://youtu.be/aE5mmG5JKTM

Here I have a simple AC voltage multiplier circuit. These are typically used to step up low AC voltages to high voltage spark output.

I decided to use the concept with very small value capacitors and small ultra fast switching RF diodes to multiply the 0.5 volts or so stray ambient voltages that come from natural and man made sources.  These energy fields may be laying around should you be located anywhere half civilized. even a town.

I'm able to get over 30 volts DC for free from the nearby ambient with a simple outdoor ham radio antenna. Using one antenna ground and the other for receive.

Using voltage multiplier this way does not give that much current. How ever, We can use this method to quickly charge capacitors at high voltages, similar to how I do with back emf, however this method proves that when you have no other source of input power available, no batteries, no chemicals, no sun, no water no wind etc. We can borrow it from the ambient! with the addition of various cap dump circuits, dump the high voltage charge from the capacitor into a set of charging batteries and charge for free! COP = infinite as you don't have to provide a penny of your money to get your output charge. This works rain or shine. Day and night.

Just thought I'd share an alternative method to accumulate a charge.

[SkyWatcher123]

Hi all, Hi joellagace, thanks for the informative post.

I will have to ponder that idea of energy collection, though i think
that method has been used in large scale ways, in a previous era.

Would be good for the people to know, that this technology is still
in use today, though guised from the people.

As far as these mosfet capacitor dump experiments, I've decided
to try and rejuvenate a 12 volt lawn mower battery, 7 years old.
Already seeing positive results, though it will take many hours of
charge/discharge cycles.
I've gone back to the 5600uF low esr capacitor, this capacitor is the
perfect sweet spot.
Using 19.5 volts input to the oscillator, which helps charge the
capacitor higher
The capacitor is being dumped once every second and is building a
capacitor voltage of around 27 volts per capacitor discharge.
This is having a strong effect on the battery, will be keeping track of
battery improvements over time.


All benevolent comments welcome.
peace love light