ZERG generator nullifies EMF with field, "doubles input efficiency"

[bistander]

bi,

Be aware I know, and see, the game in the broad scope - been there, and fought that before, a few times. Your not fooling anyone.

Your "fame and fortune and pot-of-gold" are the topic. It's a very old game BTW.

Nowhere have you ever shown how, if you gained the $10T/yr technology, you would save the World. So, why would anyone just
give that technology to you? You can't even define what a "proof" would consist of, or is!

Besides; you already have the technology (LinGen) - why don't you just build it and test it yourself - small effort on your part to, as
you claim, "Save The World" - an extremely small effort. You are certainly NOT the Authority "Proof" Guru, that's for sure.   

Your aim is clear - it's to stop it - not just my opinion BTW! I wasn't born yesturday... neither was Chris.

We can go on forever, but I'm convinced you, et. al., have now been exposed - prove me wrong!

Show your "Save the World" plan. Show anything of value; other than "give me this technology" because "I say so." 

SL

SL,
You're delusional. I play no game. But it isn't about me. Read the topic. Look at the forum mission statement. I'm here to help in the quest for a better energy source for the benefit of mankind and mother earth. Period.

After a long and successful, IMO, career, I hoped I might share some knowledge and experience with a younger enthusiastic researcher to help them see through the scams and BS to apply science and truth, stimulating perhaps a novel idea of their own. It amazes me how much resistance and crap I take helping others. It is true, no good deed goes unpunished. But I endure.

I know I'll not save the world, but I can call BS on greedy scammers. Prove Holcomb has anything of value. I dare you. Your LinGen prototype is small enough to put in a box so details are hidden. Meter input and output, loop it and run it for a month on camera. How's that for a test procedure? You're a smart boy. If you really have it, you could easily figure a way to prove it without divulging any details not already published. I don't accept you're lame excuses. We know why you won't show your in-lab proof don't we.
bi

[SolarLab]

SL,
You're delusional. I play no game. But it isn't about me. Read the topic. Look at the forum mission statement. I'm here to help in the quest for a better energy source for the benefit of mankind and mother earth. Period.

After a long and successful, IMO, career, I hoped I might share some knowledge and experience with a younger enthusiastic researcher to help them see through the scams and BS to apply science and truth, stimulating perhaps a novel idea of their own. It amazes me how much resistance and crap I take helping others. It is true, no good deed goes unpunished. But I endure.

I know I'll not save the world, but I can call BS on greedy scammers. Prove Holcomb has anything of value. I dare you. Your LinGen prototype is small enough to put in a box so details are hidden. Meter input and output, loop it and run it for a month on camera. How's that for a test procedure? You're a smart boy. If you really have it, you could easily figure a way to prove it without divulging any details not already published. I don't accept you're lame excuses. We know why you won't show your in-lab proof don't we.
bi

bi,

Thanks for sharing your "Save the World Plan" and "What a Proof really is" - enlightening, I guess?

I'll leave you in this "forum bubble" and let you have the last post, as you seem to think that's important!

Have a good one, but keep in mind the "LinGen" is the first device to be presented here that shows (proven)
Excess Energy. Of course you already knew that being the resident "Proof" expert here - no CAE experience however;
and no shown build T&M; but lots of forum chit chat which, you seem to think, makes up for this gross lack.

Whatever...

Be careful about the "greedy scammers" comments however, might come back to bite you, and et. al.. 

Take care and have a good one,

SL

[bistander]

bi,

Thanks for sharing your "Save the World Plan" and "What a Proof really is" - enlightening, I guess?

I'll leave you in the "forum bubble" and let you have the last post as you seem to think that's important!

Have a good one, but keep in mind the "LinGen" is the first device to be presented here that shows (proven)
Excess Energy. Of course you already knew that being the resident "Proof" expert here - no CAE experience however;
but lots of forum chit chat which, you seem to think, makes up for the gross lack. Whatever...

Be careful about the "greedy scammers" comments however, might come back to bite you, and et. al.. 

Take care and have a good one,

SL

SL

What value is hidden proof?

None.

If CAE was proof, why did you build LinGen prototype and test it?

Oh yeah, you know. I know.

C'ya.
bi

{edit}
Saving SL's reply here as I've noticed he deleted one earlier.

Wanted to show you all how modern technolgy development is done - as i've posted
many times here and elsewhere.

It was a hobby project to basically provide another approach to design and development,
take a CAE course and see how things are done these days - only after varifying your
design using modern tools, do you move to spending time and money winding coils and
soldering.

Too expensive, not really, do it as a project while learning or working (off-hours if need be).
Plus, you can get a high paying job with your new found skills.

CAE does not allow you hide anything as you should know; if you were skilled in the Profession.

BTW, you don't know shit!  as you have indicated many times...

Like I said:

Look somewhere else for your fame and fortune, pot of gold, or whatever your after.

Case Closed - Bye Bye...

[SolarLab]

SL

What value is hidden proof?

None.

If CAE was proof, why did you build LinGen prototype and test it?

Oh yeah, you know. I know.

C'ya.
bi

Wanted to show you all how modern technolgy development is done - as i've posted
many times here and elsewhere.

It was a hobby project to basically provide another approach to design and development,
take a CAE course and see how things are done these days - only after varifying your
design using modern tools, do you move to spending time and money winding coils and
soldering.

Too expensive, not really, do it as a project while learning or working (off-hours if need be).
Plus, you can get a high paying job with your new found skills.

CAE does not allow you hide anything as you should know; if you were skilled in the Profession.

BTW, you don't know shit!  as you have indicated many times...

Like I said:

Look somewhere else for your fame and fortune, pot of gold, or whatever your after.

Case Closed - Bye Bye...

[SolarLab]

A Perfect Example of How 
"THE CONSPIRACY AGAINST EXCESS ENERGY DEVICES WORKS"
     (And how the "Trolls Shills and LARPs operate)

The preceding 5 pages provides a good example of how some participants in these forums
perpetuate, and carry out, their Troll Shill Conspiracies, and worse.

In the first page a diagram and patent for the Excess Energy Generator (ZERG) is given.
But before "the ink is even dry" along comes the Troll Shills claiming great knowledge and
and proclaiming the the device "BS" )I know BS when I see it).

Now this Troll Shill has a history of this behaviour and it is brought to his attention. But
to no avail - this Troll Shill carries on and on for 5 pages. Spouting " The ones I've
commented on don't work" and bla bla...

Then the Co-Conspirators join the "Nay Say" supposedly claiming failed replications; even
though they have no knowledge of the detailed design nor engineering specifications.

MR. ZERG (the Inventor of the ZERG) then joins the posting on page 2 where he briefly
describs his Z.E.R.G Generator, including a third party varification by Intertek.

The next few pages are typical "Troll Roll" and great wisdom from the masses.

So, after 3 pages - lets "flush these Trolls!  It took several more pages but the results
speak for themselves:

Here you have a Troll Shill with no knowledge of Excess Energy Devices and no Skill
Set in Professional CAE Analysis nor any knowledge of, or "Hands On" experience
with, any form of "Proof of Concept;" let alone a technical appreciation of such
devices - oh, he does apparently know how a motor works => so => an OU Expert?

Now the plot thickens - the real Trolling is exposed - he want's the complete details
of the device testing, etc. - So, we ask why - but we know why - and the whole
scheme is finally exposed! Disrupt the technology by any means possible!

We've seen this time and again but it's rare its brought to light so quickly (5 pages).

JMHO