High voltage HHO by IronHead

[keithturtle]

About that vacuum pump;

I have one of these sitting on the shelf
http://www.surpluscenter.com/item.asp?UID=2007060819394962&item=16-1139&catname=electric
Haven't hooked it up yet but it'll probably do the job.

Depending on how much negative pressure is needed, a ram air venturi in the air intake may work.  The comment earlier about manifold vacuum as a function of throttle plate position is important... as long as the engine is running, there is vacuum available in the air snout.. and the faster, the greater.

Keith

[hartiberlin]

Hi All,
really please watch these videos form Roy Mcallister and Steve Harris:

http://video.google.de/videosearch?q=Hydrogen+Fuel+Car+and+MultiFuel&so=0


They are really very good !

The question still is, how do we produce the Terpine cheaply via
converting woodgas and destillation ?
How does this exactly work ?

Roy Mcallister mentions, when he drives in his car, that he uses Terpine in his
car helped with a bit of hydrogen.

If Terpine can be cheaply selfmade from destillation
of woodgas or biomass destillation, this would be ideal to store
the fuel as a liquid Terpine..
Then you don?t have the problems to directly drive via woodgas
and fiddle around before start to get the wood burning...

Regards, Stefan.

[hartiberlin]

Especially this video is very important,
cause he shows an actual ride in a homemade "terpine"
fueled car with hydrogen boost.

http://video.google.de/videoplay?docid=4463667203960833886


Can all be selfmade !

So how do we produce this homemade fuel Terpine" the easiest way ?

The car has a 700 miles range !
Incrediable !

Regards, Stefan.

[hartiberlin]

Something simular  to this,
but without burning the gases, just to condense them to Methanol or
Terpine ?

http://www.youtube.com/watch?v=OYA-Er2zmbE


How good does the condensation process work and
how much fluid fuel could you get out of it when using
such a pepsi can full of sawdust?

Regards, Stefan.

[popeye68]

Hi IronHead ,

two questions;

How much vacuum (approx.) on a cell to have any effect ,
i was thinking on first using an old vacuum-cleaner blower.
Using the same diameter tubing to the cell , rebuild the output
side a little. Just to see the difference with or without...
Would the plastic blower create static discharge you think ?

You spoke of learning us to trick the  O2-sensor , in the Magdrive video's
this guy say's the computer is adjusting the fuel-injectors leaner automatictly.
Does it depents on the type of ecu?

thanks