OverUnity prize money 15825 US$ total until now

[OffGrid rdnck]

One device must be shipped to me at OverUnity.com ( Dip. Ing. Stefan Hartmann)
and the 2 other devices can be shipped for instance to Mr. Jean Louis Naudin
(jlnlabs.org) and Mr. Sterling D.Allan ( freeenergynews.com)

There is no way any  serious person would send anything to moonbats associated with T Bearden. Sterrling Allan is legit, but anyone associated with "AIAS", which is just a new name for Vangard Sciences/KeelyNet, same moonbats, and same nonsensical "<a href="http://groups.yahoo.com/group/free_energy/files/meg_debunk.pdf>"Bearden Math"</a> mumbo jumbo. (What does AIAS stand for? AIAS - "Alpha Foundation's Institute for Advanced Study." Where does "Alpha" come from? I don't know.) It is obvious Tom Bearden, AIAS,  and everyone involved in the MEG project, do not understand basic textbook physics. This is not especially surprising, when one considers Tom Bearden has repeatedly stated everything in standard textbooks is wrong.

Taking a 100w resister and zaping it with high voltage, thus frying it, then claiming it is some miracle wonder device  which "recieves energy from the vaccum"  still makes engineers roll around the floor in fits of laughter.

"Bearden has a litany of spurious claims. It is amazing how much damage somebody like Bearden can cause."  Lawrence B. Crowell'

"Abstract: We show that the AIAS group collection of papers on a ``new electrodynamics'' recently published in the Journal of New Energy, as well as other papers signed by that group (and also other authors) appearing in other established physical journals and in many books published by leading international publishers (see references) are full of misconceptions and misunderstandings concerning the theory of the electromagnetic field and contain fatal mathematical flaws, which invalidates almost all claims done by the authors."

[Note: At the meeting of the Natural Philosophy Alliance quoted in footnote 2, Dr. Munera was present. He confirmed to the public attending W.A.R. lecture at that meeting that his name has been used withouth his consent in some publications of the AIAS group.

A.L. Trovon de Carvalho and W.A. Rodrigues Jr, published in "Random Operators and Stochastic Equations"

It would be wize to read the rest.

It would also be wize to dissasociate your contest from  quacks.

[fesearcher]

Hi OffGrid rdnck (redneck?),
I wan't to beleive that it is possible to tap the see of energy which is just some sort of a potential field an a therory that nobody can proof just like the big bang, but many are talking about as they have witnessed it.
I do agree that many are talking rubbish. I can state this as far it concerns electronics since I have studied electronics at university. But I'm open to other ideas. However, before I call out everything is possible and can be done, I try it myself and do my own research. When I'm successful in making excess energy then, and only then I will call out that free energy is real an possible.
I regret that many of the (self named) experts are topping each other in just guessing. Science today is able to do many unbelievable things which are repeatable and which are based on proofed theories. All their scientific works are comprehensible and fully documented.
I won't agree that the idea of gaining free energy which is only the tapping of energy that is already around, would not be possible, but I can say that for the non-aceptance of this idea it's "researcher" have to be blamed, because of their sloppy work, no matter if they are right or wrong!

So don't pay attention to all the other bullshit artists and faultfinder who want to attend scientific research and have not done their homework yet.
P.K.

[hartiberlin]

As of until now J.L.Naudin and St. D. Allan did not answer my emails,if they want and can
test the devices.

So I have now choosen Rich Weber from gn0sis.com in the US to be the second party.

The best thing for the 3rd party would be an independent  university I guess.

So who is applying for this challenge ?
Please send me a private email.

Thanks.

Regards, Stefan.

[JackH]

Hello Stefan,

Well I have somthing to say here.    Now I have been working on a free energy project for over 25 years now.   I have just about tryed about everything. That is on the internet.   And after the new rare earth magnets came out I tryed them all again.  I could not get anything to produce power out.  I have suceded in making severial self running models, but in time they would guit because of magnet degradation.

   So I am here to say that there is no simple way to build a self runner that will produce extra power.  It is going to cost alot of money.   Now I am very gratfull that you are going to give a reward for a self runner that produces 50 watts of extra energy.   I think it will aspire more interest in people to get on the band wagon.

I have been very carefull of what I had to say here on this forum about my motor.  However I am going to state something in hopes that I don't get a visit from the MIB,  I have allready gotten six thretening calls, from I don't now where. The calls were not traseable, One I found out was from my home town made from a pay phone at a super market. The person on the line said to stop building the motor or my family was dead.

The 2" magnet motor I had running, I took it down to Goodyear Atomic plant to have it tested by one of there electronics and motor tecknitions.    Now mind you that this motor was just a two valve motor and it was running of a set of motorcycle points.  Now the points would only last just over 5 minuts at full load till they burnt up.  And the motor was just a two valve motor using 2" diam.  magnets.  It had at least 1/4 turn/rev of cost time.

This motor tested out to be in the range of 200% efficiency.  The guy that tested the motor imediatly baught into my company. Now I have been very cauthous to tell this story, because of feer of someone trying to put me to sleep.

Now my problem,  I have built a new motor that uses 4"x2"x1" magnets.  Now when I built this motor there was three different places that had the magnets I needed, when I got the motor done, I didn't have the money to buy the magnets.   Now I finally got the money and I cannot find the magnets anywhere.   So I am currently building a motor that will be a three valve motor that uses three stacks of 1" magnets 6 inches high.   Now the magnets alone cost over $700.00 in us currency.  The total cost of this new motor I estimate will be over $3000.00.  I had to buy more solicon steel and more aluminum to build it, more stanless steel bolts and bearings for the shaft.

This new motor will use 2"x2"x1" N48 Magnets stacked 6 high.  Just the magnets alone will produse about 20% more power over the 2" round magnets.  This new motor will also have a 7 inch rotor over the 5 inch rotor that the old motor had.  This should mean much more torque to the shaft.   I have found someone that is willing to build an electronic controller(Honk) for this new motor for free. However I have pleged him a shares of the company.   I am very gratfull to him.    I also found someone to donate the magnet wire(boxofsparks) to to wind the coils for this motor.  He also will get a new motor.

Now when this new motor is built I am going to take it to the Ohio State university to have it checked out.  They would not check the other motor out because it was not electronic controlled and it was sometimes not self starting because of the 1/4 cost time.

I would like to win your reward but I have a problem,  How am I going to get the money to build severial test units to send around the world, this motor weigh's in the neberhood of around 100 lbs so shipping alone would be very expencive.  It takes me around two months to just build one of these things, let alone the cost to build them.

I have plains to realease the plains to this motor on this message board as soon as I get the patents back from the patent aturney.   I would like to know what the problem is with getting patents on this thing and then turning it loose for every one to build.   I think getting patents on something like this is the best way to protect the invention itself.    If I don't get patents on it I run the risk of a big company getting patents and stoping everyone else from producing it.   Now I now you are going dispute that wance it is made public it cannot be patented, but I have found out that things can be baught and paid for in the good ole USA.

The one thing I want foir this motor is for it to be shared with everyone.  Now I realize that just everyone will not be able to build it, but with good plains they could have it built by a good machine shop.   I want my grand children to have just as good a life on this earth as at least I had or maybe even better.  And with global warming, if it keeps up, it's going to be hell on this earth in about 20 years from now if someone does not produce clean power.    I say hats of to every one that is working on clean power on this board.  However it is just not going to be cheep to do.

I have visited over three places just in Ohio that have self running units.  However they are just that, no extra power.   The simple ways are not going to produce extra power.  If that were the case there would be hundreds of them now on the market.

I would like to collect your prize money when this thing is built, and also make plains avalable to everyone, but I just do not know how I can aford to build units to send out to different people for testing.    Maybe you can tell me.

Thanks,,,,,,,,,Later,,,,,,,,,Jack W Hildenbrand

[hartiberlin]

Hi Jack,
sorry, I am a bit in a hurry now,
but still want to reply now.

If your new big motor will run with these expensive
magnets, it should be possible to scale it down
and build smaller maotors with using standard normal
neodym magnets , which only costs a few dollars.

So maybe you can learn from your new motor, which
parameters it really needs and try then to build smaller
ones, which also work and put out at least 50 Watts.

Would be interesting to hear from you, which motors
you saw, that selfrun, but just only overcome friction.
Thanks.

Regards, Stefan.