Overunity.com Archives is Temporarily on Read Mode Only!



Free Energy will change the World - Free Energy will stop Climate Change - Free Energy will give us hope
and we will not surrender until free energy will be enabled all over the world, to power planes, cars, ships and trains.
Free energy will help the poor to become independent of needing expensive fuels.
So all in all Free energy will bring far more peace to the world than any other invention has already brought to the world.
Those beautiful words were written by Stefan Hartmann/Owner/Admin at overunity.com
Unfortunately now, Stefan Hartmann is very ill and He needs our help
Stefan wanted that I have all these massive data to get it back online
even being as ill as Stefan is, he transferred all databases and folders
that without his help, this Forum Archives would have never been published here
so, please, as the Webmaster and Creator of these Archives, I am asking that you help him
by making a donation on the Paypal Button above.
You can visit us or register at my main site at:
Overunity Machines Forum



This is HOW THE TPU WORKS!!!!

Started by Bruce_TPU, April 23, 2007, 08:42:28 PM

Previous topic - Next topic

0 Members and 2 Guests are viewing this topic.

Print
Go Down Pages 1 ... 3 4 5
User actions

Bruce_TPU

#20
April 25, 2007, 12:31:30 AM
 :-X
1.  Lindsay's Stack TPU Posted Picture.  All Wound CCW  Collectors three turns and HORIZONTAL, not vertical.

2.  3 Tube amps, sending three frequency's, each having two signals, one in-phase & one inverted 180 deg, opposing signals in each collector (via control wires). 

3.  Collector is Magnetic Loop Antenna, made of lamp chord wire, wound flat.  Inside loop is antenna, outside loop is for output.  First collector is tuned via tuned tank, to the fundamental.  Second collector is tuned tank to the second harmonic (component).  Third collector is tuned tank to the third harmonic (component)  Frequency is determined by taking the circumference frequency, reducing the size by .88 inches.  Divide this frequency by 1000, and you have your second harmonic.  Divide this by 2 and you have your fundamental.  Multiply that by 3 and you have your third harmonic component.  Tune the collectors to each of these.  Input the fundamental and two modulation frequencies, made to create replicas of the fundamental, second harmonic and the third.

4.  The three frequency's circulating in the collectors, both in phase and inverted, begin to create hundreds of thousands of created frequency's, via intermodulation, that subtract to the fundamental and its harmonics.  This is called "Catalyst".

5.  The three AC PURE sine signals, travel through the amplification stage, Nonlinear, producing the second harmonic and third.  (distortion)

6.  These signals then travel the control coils, are rectified by a full wave bridge, and then sent into the output outer loop as all positive pulsed DC.  This then becomes the output and "collects" the current.

P.S.  The Kicks are harmonic distortion with passive intermodulation.  Can't see it without a spectrum analyzer, normally unless trained to see it on a scope.

turbosetch

#21
April 25, 2007, 04:19:11 AM
I am finding that coulpling with these wires at any freq is tough. I could just brute force pulsed dc or ac here but I can't figure how you get multiple freqs on the wire. I see your posts about using tubes. I am a big time tube guy in the RF field. The problem with experimenting with tubes is the power supply can be high voltage and usually have to be built. Depending on the type of tube and application you may need several power sources just to get it going.

Another thing that puzzles me is the fact you talk about lower resistance on the larger wire yer the air gap or spark gap as you call it is the biggest resistor of them all. Its a neat idea but seems like more is missing then just the controller. Perhaps there is more to decode.

BTW some people on the boards are suspect in terms of credibilty. I have heard rumors of companys that are on the verge of the same technology planting people on these boards to spread disinformation and to bash others that are close to the secrets.

UncleFester

#22
April 25, 2007, 07:09:04 AM
Have you seen anything resembling a vacuum tube in the SM videos? Nothing larger than a sugar cube is apparent in the coils he is running. Transformers and tubes and other cumbersome devices are simply distractions. Sm is not using them in the videos, so if you want power from the device you should not need to use any of those things.

Bruce_TPU

#23
April 25, 2007, 04:40:20 PM
 :-X
1.  Lindsay's Stack TPU Posted Picture.  All Wound CCW  Collectors three turns and HORIZONTAL, not vertical.

2.  3 Tube amps, sending three frequency's, each having two signals, one in-phase & one inverted 180 deg, opposing signals in each collector (via control wires). 

3.  Collector is Magnetic Loop Antenna, made of lamp chord wire, wound flat.  Inside loop is antenna, outside loop is for output.  First collector is tuned via tuned tank, to the fundamental.  Second collector is tuned tank to the second harmonic (component).  Third collector is tuned tank to the third harmonic (component)  Frequency is determined by taking the circumference frequency, reducing the size by .88 inches.  Divide this frequency by 1000, and you have your second harmonic.  Divide this by 2 and you have your fundamental.  Multiply that by 3 and you have your third harmonic component.  Tune the collectors to each of these.  Input the fundamental and two modulation frequencies, made to create replicas of the fundamental, second harmonic and the third.

4.  The three frequency's circulating in the collectors, both in phase and inverted, begin to create hundreds of thousands of created frequency's, via intermodulation, that subtract to the fundamental and its harmonics.  This is called "Catalyst".

5.  The three AC PURE sine signals, travel through the amplification stage, Nonlinear, producing the second harmonic and third.  (distortion)

6.  These signals then travel the control coils, are rectified by a full wave bridge, and then sent into the output outer loop as all positive pulsed DC.  This then becomes the output and "collects" the current.

P.S.  The Kicks are harmonic distortion with passive intermodulation.  Can't see it without a spectrum analyzer, normally unless trained to see it on a scope.

giantkiller

#24
April 25, 2007, 06:40:39 PM
@butzer,
Don't waste your time. We are already here and in full force. The TPU dynamics have already been presented to qualified professionals 'OUT there' to no avail.
Steven had tube equipment available at the time so that is what he used.
I used my electric guitar and sound processor to measure the extent of the magnetic field around the GK4 when it was kicking out VHRF and microwave. Does that make me Eddy Van Halen?

Back away from the keyboard and put your head down.

--giantkiller. Can you spell audio engineer?
Print
Go Up Pages 1 ... 3 4 5
User actions