New accelerating gravity wheel ! Converted video from www.newenergymachine.com !

[LarryC]

Could you please direct me to the post where you learned of the cam and levered followers? All I can find is  mention of a cam.  I am lacking input as to what kind of cam or its function, hydraulic valve cam, make and break contact cam, lifter cam, ETC.

Bob's post follows:

The way to lift the weight to the opposit end is at the 4:00 oclock position (later he states 3:30) an  arm from the centre, on a cam mecanisum to the end of the arm (2.5 ft) is forced around and lifts the linked weights 1" farther than 1/2 the total travel. Centricical force will lift it the rest of the way. It acts like a leaver 2.5" to centre and 10" past.The farther it pushes the weight from the bottom the easier it gets.The first 2" is the heaviest. The spring mecanisum helps at the first of the upward stroke.

This was hard to figure until we applied it as a third class lever. First a pivot point than a roller at 2.5" from the pivot and then at 10" past the 2.5" roller it connects to the 2.5 FT lift arm connected to the weight boxes. Once this lever mechanism was established than the cam requirement fall into place. If the cam lifts the 2.5" roller .8" over 45 degrees (3:30 to 5:00) with spring assist then the 10" past will lift the weight boxes at the end of the 2.5FT rods 4". If another 1.6" lift was added to the 2.5" roller at 5:00 to 6:00 (30 degrees) than the weight box lift will be another 8". The last 1.6" is done by the actuator arm (6/36") plus supercharger per Bob.

Regards, Larry

[rlortie]

LarryC , Charlie and broli,

Thank you for your research and input.

Shaking the apple tree as we have been doing the last couple of days, has caused an apple or two to fall! They are not ripe yet and we know green apples are not good for us.

I suggest we all go back to our own research or what ever and proceed  our favored path, whether it be hands on research or armchair philosophy.  I have recieved confirmation that we have all we are going to get for now regarding Bob's machine. I feel that any more speculation here other than reference to personal progress of ones own endeavors will be in vain.  We are not going to hear from Bob until he is ready to pull back the curtain.

Those concerned about the possibility of Bob and his machine going the same way as Bessler need not fear, it is not going to happen!

If you are attempting to duplicate as Larry is doing, I suggest you proceed using your own innovation. I am going to shelve all my research on this and wait for an announcement which hopefully (as quoted) will come before the end of November. If we do not hear anything by then I for one will consider proceeding with my own version. I have been patient for fifty years, another couple of weeks is a drop in the bucket!

Tomorrow I return to the shop, I have a couple of concepts to work on. Luckily I have three test beds, when I tire or loose patience with one I jump to another, giving my mind a chance to clear and reflect. Its my way of avoiding 'tunnel vision' 

Regards,

Ralph Lortie



 

[LarryC]

@Ralph,

If you are attempting to duplicate as Larry is doing, I suggest you proceed using your own innovation. I am going to shelve all my research on this and wait for an announcement which hopefully (as quoted) will come before the end of November. If we do not hear anything by then I for one will consider proceeding with my own version. I have been patient for fifty years, another couple of weeks is a drop in the bucket!


Yes, Ralph, I tried to valiantly responsed to you earlier, that is gone now as I cannot sustain.

Do you really think you may have all the time in the world? My father in law, not much older than you, but earlier today (2:47 Ct AM), I was awaking by a phone call from the hospital with my father in laws unsuspected death and my wife's (his daughter) extreme sadness. So I may be out of touch for a while.

So please people, get er done while you're here, for your family and the world, before your ability to do so is going!

Regards, Larry 

[rlortie]

Larry,

Do you really think you may have all the time in the world? My father in law, not much older than you, but earlier today (2:47 Ct AM), I was awaking by a phone call from the hospital with my father in laws unsuspected death and my wife's (his daughter) extreme sadness. So I may be out of touch for a while.


I am sorry to hear of your loss and offer my condolence. And no! we do not have all the time in the world, at least not as an individual. I am on borrowed time now.

So please people, get er done while you're here, for your family and the world, before your ability to do so is going!

I only exist for that reason, its a long story and I will not go into full detail but after my second heart attack I was diagnosed in August of 2002 and told I would be dead by February of 2003

In October 2002 I flat lined and was revived 27 times in a period of a 300 mile fixed wing jet airplane ride while being transported to a Cardiology Hospital. There after awakening  I was informed that I was a prime candidate for a new experimental heart surgery procedure.  I offered myself as a walk in cadaver to Oregon State University teaching hospital,

The operation procedure was explained to me and  that my chances of surviving  the operation were very low.  Both my wife and I had to sign a contractual agreement.  My heart was sliced and diced and sewn back together.  When I came out of the anesthesia Alan Alda and the crew from Scientific American Frontiers was there.  Two months later a defibrillator was implanted in my chest. Every three months I now go in and have my inboard computer downloaded and battery checked.   

Now I am not a Bible thumper but for some reason it just wasn't my time to go. Ever since I have had this insatiable urge to put full time into seeking a new energy source, I chose to pursue gravity after spending many years with magnets. For me it is the only reason I am alive. it is as though God said, No I am not ready for you yet, you have something more to do, and I cannot think of what it is other than turning gravity into a clean energy source. It is the direction he pointed me in! 

For those that follow the readings of the Bible, God said in so many words that there is everything here man will ever desire, seek and ye shall find. As our technology grows so does our seeking and finding. But IMO we are not going to find it until we are smart or evolved enough to utilize it, a walk through history will tend to confirm this.   

My life is built around gravity wheels and that damn guy named Bessler. Before I die it is imperative that I or some one stands on his shoulders while he is in a lake over his head!. In the meantime my house that is in need of maintainance is falling down around my ears. Research in the shop and on the computer are more important until the roof springs a leak!

Maybe this will help explain why I offer to build viable or questionable designs for people who lack the resources or empirical skills to build their own.    
   

[noonespecial]

Odd...isn't it?

The problem with these forums is that we converse/spar with faceless nicknames. Its so easy to view them adversarially until you 'walk a mile in their shoes' so to speak.

Thank you Ralph...very inspirational.

And sincere condolences to LarryC.

Regards,
Charlie