Overunity.com Archives is Temporarily on Read Mode Only!



Free Energy will change the World - Free Energy will stop Climate Change - Free Energy will give us hope
and we will not surrender until free energy will be enabled all over the world, to power planes, cars, ships and trains.
Free energy will help the poor to become independent of needing expensive fuels.
So all in all Free energy will bring far more peace to the world than any other invention has already brought to the world.
Those beautiful words were written by Stefan Hartmann/Owner/Admin at overunity.com
Unfortunately now, Stefan Hartmann is very ill and He needs our help
Stefan wanted that I have all these massive data to get it back online
even being as ill as Stefan is, he transferred all databases and folders
that without his help, this Forum Archives would have never been published here
so, please, as the Webmaster and Creator of these Archives, I am asking that you help him
by making a donation on the Paypal Button above.
You can visit us or register at my main site at:
Overunity Machines Forum



all you need is spead diode to make tpu bealivet

Started by MACEDONIA CD, June 02, 2007, 03:57:49 PM

Previous topic - Next topic

0 Members and 2 Guests are viewing this topic.

Print
Go Down Pages 1 2 3 4 5 ... 7
User actions

MACEDONIA CD

#10
June 06, 2007, 03:00:07 PM
ok   HI    this circuits   is  not  a  have make   R E A D  PLEASE   I GET MORE  >>>>>>>> POWER   I MEAN  WATT  IN OUT  COLEC. COIL  ,A NOT  BIGER VOLTAGE   <<<<<<<<<    I SAY  A BROKE   BULB  25 WATT 12 VOLTS   ,,,,,   WHIT  8WATT INPUT ENERGY  .......     DO YOU ANDERSTEND    A SAY POWER  I MEAN  WATT  NO DUBLE VOLTAGE     




                     ....................
                       

Bruce_TPU

#11
June 06, 2007, 03:29:19 PM
Thank you Macedonia,

Please draw a simple circuit including the pieces you are using and post it here.  It will make it easier to understand.  If you need help with this, please let us know and one of us will attempt to assist you in drawing it. 

Thank you,
Bruce
1.  Lindsay's Stack TPU Posted Picture.  All Wound CCW  Collectors three turns and HORIZONTAL, not vertical.

2.  3 Tube amps, sending three frequency's, each having two signals, one in-phase & one inverted 180 deg, opposing signals in each collector (via control wires). 

3.  Collector is Magnetic Loop Antenna, made of lamp chord wire, wound flat.  Inside loop is antenna, outside loop is for output.  First collector is tuned via tuned tank, to the fundamental.  Second collector is tuned tank to the second harmonic (component).  Third collector is tuned tank to the third harmonic (component)  Frequency is determined by taking the circumference frequency, reducing the size by .88 inches.  Divide this frequency by 1000, and you have your second harmonic.  Divide this by 2 and you have your fundamental.  Multiply that by 3 and you have your third harmonic component.  Tune the collectors to each of these.  Input the fundamental and two modulation frequencies, made to create replicas of the fundamental, second harmonic and the third.

4.  The three frequency's circulating in the collectors, both in phase and inverted, begin to create hundreds of thousands of created frequency's, via intermodulation, that subtract to the fundamental and its harmonics.  This is called "Catalyst".

5.  The three AC PURE sine signals, travel through the amplification stage, Nonlinear, producing the second harmonic and third.  (distortion)

6.  These signals then travel the control coils, are rectified by a full wave bridge, and then sent into the output outer loop as all positive pulsed DC.  This then becomes the output and "collects" the current.

P.S.  The Kicks are harmonic distortion with passive intermodulation.  Can't see it without a spectrum analyzer, normally unless trained to see it on a scope.

FreeEnergy

#12
June 06, 2007, 03:39:32 PM
Quote from: btentzer on June 06, 2007, 03:29:19 PM
Thank you Macedonia,

Please draw a simple circuit including the pieces you are using and post it here.  It will make it easier to understand.  If you need help with this, please let us know and one of us will attempt to assist you in drawing it. 

Thank you,
Bruce

i already said that, but i don't think it's going to happen.

so far all i see is empty claims.

wattsup

#13
June 07, 2007, 02:18:14 AM
Received this message from Macedonia today.

I had asked him about his speed diode.

I think we will have a communication problem. I sent  him an email but I think he cannot understand or it is neither here nor there. But there is a problem in communication so if there is anyone that speaks Macedonian, we need your help.

QUOTE
HI this is macedonia cd ... sory wor my reply but i whant to say to you ,,, this diode its like the figure like ordonery BUZ11 tranzistor ,,,
in this object is a 2 diode i have make 4 duble diode as 1 and i have a ac/dc convertor but


this diode you made find in the power suply in the PC comuters in this box power suply is 2 diode ho is have small resistance
BY THANKS
UNQUOTE

Bruce_TPU

#14
June 07, 2007, 09:00:03 AM
@ everyone

I recieved further instructions as well from our Macedonian friend.  Perhaps some one can understand this and try a replication:

Cheers,
Bruce

Message:
HI    IF YOU WANT  TO MAKE THIS   
  YOU GET  SOME  SPEAD DIODE    YOU CAN FIND IN THE  POWER SUPLY IN THE PC COMPUTER   IN THIS BOX  YOU CAN FIND  2 DIODE WHIT  A CASE  LIKE    ,,,   BUZ 11A,,,  OK  THEN YOU  GET  A 20000yf  63v  capacitator    .....

  then you  make simple  ac/dc  convertor ..
  then you make simple  tpu whit primar   and  secondar  colector   ho is conected  to a ac/dc converter   then you  bring a  250Khz  impluse  ho is not a  sinusoide votage  ,,  in the primari coil

  you make  6 inces colector coil     then around this  coil   make  about 20 turns  coil   
1.  Lindsay's Stack TPU Posted Picture.  All Wound CCW  Collectors three turns and HORIZONTAL, not vertical.

2.  3 Tube amps, sending three frequency's, each having two signals, one in-phase & one inverted 180 deg, opposing signals in each collector (via control wires). 

3.  Collector is Magnetic Loop Antenna, made of lamp chord wire, wound flat.  Inside loop is antenna, outside loop is for output.  First collector is tuned via tuned tank, to the fundamental.  Second collector is tuned tank to the second harmonic (component).  Third collector is tuned tank to the third harmonic (component)  Frequency is determined by taking the circumference frequency, reducing the size by .88 inches.  Divide this frequency by 1000, and you have your second harmonic.  Divide this by 2 and you have your fundamental.  Multiply that by 3 and you have your third harmonic component.  Tune the collectors to each of these.  Input the fundamental and two modulation frequencies, made to create replicas of the fundamental, second harmonic and the third.

4.  The three frequency's circulating in the collectors, both in phase and inverted, begin to create hundreds of thousands of created frequency's, via intermodulation, that subtract to the fundamental and its harmonics.  This is called "Catalyst".

5.  The three AC PURE sine signals, travel through the amplification stage, Nonlinear, producing the second harmonic and third.  (distortion)

6.  These signals then travel the control coils, are rectified by a full wave bridge, and then sent into the output outer loop as all positive pulsed DC.  This then becomes the output and "collects" the current.

P.S.  The Kicks are harmonic distortion with passive intermodulation.  Can't see it without a spectrum analyzer, normally unless trained to see it on a scope.
Print
Go Up Pages 1 2 3 4 5 ... 7
User actions