Overunity.com Archives is Temporarily on Read Mode Only!



Free Energy will change the World - Free Energy will stop Climate Change - Free Energy will give us hope
and we will not surrender until free energy will be enabled all over the world, to power planes, cars, ships and trains.
Free energy will help the poor to become independent of needing expensive fuels.
So all in all Free energy will bring far more peace to the world than any other invention has already brought to the world.
Those beautiful words were written by Stefan Hartmann/Owner/Admin at overunity.com
Unfortunately now, Stefan Hartmann is very ill and He needs our help
Stefan wanted that I have all these massive data to get it back online
even being as ill as Stefan is, he transferred all databases and folders
that without his help, this Forum Archives would have never been published here
so, please, as the Webmaster and Creator of these Archives, I am asking that you help him
by making a donation on the Paypal Button above.
You can visit us or register at my main site at:
Overunity Machines Forum



Successful TPU-ECD replication !

Started by mrd10, June 12, 2007, 05:12:47 AM

Previous topic - Next topic

0 Members and 2 Guests are viewing this topic.

Print
Go Down Pages 1 ... 156 157 158 159 160 ... 358
User actions

kosmoss

#785
July 13, 2007, 12:18:11 AM
Hi, Everybody.

   I am new to this forum and I admire all of you and the hard work you put in the subject. I've been doing
research of OU devices for some time now and i when I came across this topic I was quite excited.
I would like to replicate TPU myself, but before investing time and money in a project, I do my homework.

   I have read all the essential messages in this topic and I must admit, my enthusiasm has faded. Why?

   After the first messages, I saw the video of Jason lighting the light bulb obviously. The power supply
shows 40V input or something after the bulb is fully lit. If the coil returned power to the power supply,
the voltage on the display should go down not up, it is just logical to me. My conclusion is, that the light
bulb was just powered from the power supply via transformer. You all saw what happened after connecting the coil to the battery.

   I was trying to find some info on Steven Mark. Some credentials, website, anything. I thought that the
man called "The Master of Magnetics" or his UEC Corporation should have a website. Nothing I could find. But found this, and you better take your time to read this just in case:  http://www.padrak.com/ine/SMARK.html

   Obviously, I watched the videos of SM devices on YouTube. This 38 min video is nicely done, ties, nice
house, furniture etc. But, it proves nothing. Inside the house, many trics can be done like induction,
hidden power cables, batteries, etc. I know what you will say: he took it outside! Right, but look carefully
at the camerawork at that moment; still inside the house camera loses the contact with the person who
carries the coil for a brief moment, just enough to switch it to battery pack. He goes outside, demonstrates
that the light bulb is lit. The same trick on the way back, you loose visual contact with the coil yet
again. It can be switched to anything. This video proves nothing.

   In another video SM demonstrates his device to some people. The date is 1997. If the coil is working,
what took him 10 years, just to make another video. It is just common sense, that somthing is not right
here.

   Did any of you see the device working with your own eyes, not on video? If even so, did you have a chance to test it properly, like running TV for 24 hours? Talk is cheap, seeing is beliving.


   Please don't understand me wrong, I am not writing this to undermine your efforts, I am just looking for
some answers.


   Best Regards,

      Kosmoss

chrisC

#786
July 13, 2007, 12:48:38 AM
@kosmoss

Welcome to the SM TPU Research forum. Obviously you have not read far and wide nor deep enough. The stuff you posted is more than misleading.

Start with these condensed readings first.

1. http://www.overunity.com/index.php/topic,712.2560.html

from Darren (ZPE)

2. http://www.overunity.com/index.php/topic,2383.0.html

Stefan's - the webmaster of OU

3. Then when you understand enough, look at Otto's, Renotte's and follow Tao!

cheers
chrisC

Bruce_TPU

#787
July 13, 2007, 12:52:39 AM
Oh brother!

Another Kokomojo.  He forever haunts the forum!  LOL

Mr. I did my homework, you mean well, I'm sure but...Back to your studies.  We have covered all of this many, many, many, times.  Please do a search of Kokomojo's old thread...LOL  You will save us all the time of writing the same things...again.

Cheers,
Bruce
1.  Lindsay's Stack TPU Posted Picture.  All Wound CCW  Collectors three turns and HORIZONTAL, not vertical.

2.  3 Tube amps, sending three frequency's, each having two signals, one in-phase & one inverted 180 deg, opposing signals in each collector (via control wires). 

3.  Collector is Magnetic Loop Antenna, made of lamp chord wire, wound flat.  Inside loop is antenna, outside loop is for output.  First collector is tuned via tuned tank, to the fundamental.  Second collector is tuned tank to the second harmonic (component).  Third collector is tuned tank to the third harmonic (component)  Frequency is determined by taking the circumference frequency, reducing the size by .88 inches.  Divide this frequency by 1000, and you have your second harmonic.  Divide this by 2 and you have your fundamental.  Multiply that by 3 and you have your third harmonic component.  Tune the collectors to each of these.  Input the fundamental and two modulation frequencies, made to create replicas of the fundamental, second harmonic and the third.

4.  The three frequency's circulating in the collectors, both in phase and inverted, begin to create hundreds of thousands of created frequency's, via intermodulation, that subtract to the fundamental and its harmonics.  This is called "Catalyst".

5.  The three AC PURE sine signals, travel through the amplification stage, Nonlinear, producing the second harmonic and third.  (distortion)

6.  These signals then travel the control coils, are rectified by a full wave bridge, and then sent into the output outer loop as all positive pulsed DC.  This then becomes the output and "collects" the current.

P.S.  The Kicks are harmonic distortion with passive intermodulation.  Can't see it without a spectrum analyzer, normally unless trained to see it on a scope.

otto

#788
July 13, 2007, 01:17:40 AM
Hello all,

@Kosmoss

1. forget to find patents about the TPU
2. forget the padrak.com shit
3. forget that this videos are a fake

You want or dont want to work.

If yes, you are wellcome but I must warn you: its a veeery hard "job".

If you are a "PC hero" then stand back and let us work.

THE TPU IS REAL!!!!!

Otto

HopeForHumanity

#789
July 13, 2007, 02:48:48 AM
I notice these people every where on the internet. They trust anything negative they read, and automaticaly think there a know it all. Standard ignorant skeptic....

Time TPU was made and size of generator = no batteries to create output...

Works outside = no hidden indoor power source...

Amount of current = impossible power amount being transmitted...

Doesn't work upside down = pointless to fake such difficult task...

Judging by evidence, I would say the amount of money it would take to fake something of this would be more than the amount of money earned from investors...

Thats just MO... ;)
Ron Paul is internet overunity: http://www.youtube.com/watch?v=vXnBZd4nyWk

WE MUST STOP THIS! Free energy is being surpressed because of it!
Print
Go Up Pages 1 ... 156 157 158 159 160 ... 358
User actions