Overunity.com Archives is Temporarily on Read Mode Only!



Free Energy will change the World - Free Energy will stop Climate Change - Free Energy will give us hope
and we will not surrender until free energy will be enabled all over the world, to power planes, cars, ships and trains.
Free energy will help the poor to become independent of needing expensive fuels.
So all in all Free energy will bring far more peace to the world than any other invention has already brought to the world.
Those beautiful words were written by Stefan Hartmann/Owner/Admin at overunity.com
Unfortunately now, Stefan Hartmann is very ill and He needs our help
Stefan wanted that I have all these massive data to get it back online
even being as ill as Stefan is, he transferred all databases and folders
that without his help, this Forum Archives would have never been published here
so, please, as the Webmaster and Creator of these Archives, I am asking that you help him
by making a donation on the Paypal Button above.
You can visit us or register at my main site at:
Overunity Machines Forum



Successful TPU-ECD replication !

Started by mrd10, June 12, 2007, 05:12:47 AM

Previous topic - Next topic

0 Members and 27 Guests are viewing this topic.

Print
Go Down Pages 1 ... 169 170 171 172 173 ... 358
User actions

otto

#850
July 18, 2007, 01:49:36 AM
Hello all,

what to say??

In short:

I made a magnetic amplifier, pulsed it and now again, I have nothing anymore. Everything burned. A lot of smoke and power supply and oscillators are damaged. Totally. Scope, OK, because it was NOT connected.

As Im on vacation from next Monday so please, dont sent me PMs and mails because I cant answer.

For at least I month Im out of "Game".

I wish and I KNOW that the people here can built a good TPU in this month.

Good luck to you all, be very carefull.

Otto

Bruce_TPU

#851
July 18, 2007, 03:32:53 AM
Hello Otto,

I am very sorry to hear about your loss of your oscillators, controller and power supply.  I can imagine how frustrating that can be.  Hang in there!  :(

Warm regards and peace,
Bruce
1.  Lindsay's Stack TPU Posted Picture.  All Wound CCW  Collectors three turns and HORIZONTAL, not vertical.

2.  3 Tube amps, sending three frequency's, each having two signals, one in-phase & one inverted 180 deg, opposing signals in each collector (via control wires). 

3.  Collector is Magnetic Loop Antenna, made of lamp chord wire, wound flat.  Inside loop is antenna, outside loop is for output.  First collector is tuned via tuned tank, to the fundamental.  Second collector is tuned tank to the second harmonic (component).  Third collector is tuned tank to the third harmonic (component)  Frequency is determined by taking the circumference frequency, reducing the size by .88 inches.  Divide this frequency by 1000, and you have your second harmonic.  Divide this by 2 and you have your fundamental.  Multiply that by 3 and you have your third harmonic component.  Tune the collectors to each of these.  Input the fundamental and two modulation frequencies, made to create replicas of the fundamental, second harmonic and the third.

4.  The three frequency's circulating in the collectors, both in phase and inverted, begin to create hundreds of thousands of created frequency's, via intermodulation, that subtract to the fundamental and its harmonics.  This is called "Catalyst".

5.  The three AC PURE sine signals, travel through the amplification stage, Nonlinear, producing the second harmonic and third.  (distortion)

6.  These signals then travel the control coils, are rectified by a full wave bridge, and then sent into the output outer loop as all positive pulsed DC.  This then becomes the output and "collects" the current.

P.S.  The Kicks are harmonic distortion with passive intermodulation.  Can't see it without a spectrum analyzer, normally unless trained to see it on a scope.

Earl

#852
July 18, 2007, 03:36:39 AM
Otto,

so sorry to hear this.

May I suggest to all experimenters to only use batteries for testing and NEVER use
regulated power supplies.

Earl

Quote from: otto on July 18, 2007, 01:49:36 AM
Hello all,

what to say??

In short:

I made a magnetic amplifier, pulsed it and now again, I have nothing anymore. Everything burned. A lot of smoke and power supply and oscillators are damaged. Totally. Scope, OK, because it was NOT connected.

As Im on vacation from next Monday so please, dont sent me PMs and mails because I cant answer.

For at least I month Im out of "Game".

I wish and I KNOW that the people here can built a good TPU in this month.

Good luck to you all, be very carefull.

Otto
"It is through science that we prove, but through intuition that we discover." - H. Poincare

"Most of all, start every day asking yourself what you will do today to make the world a better place to live in."  Mark Snoswell

"As we look ahead, we have an expression in Shell, which we like to use, and that is just as the Stone Age did not end for the lack of rocks, the oil and gas age will not end for the lack oil and gas, but rather technology will move us forward." John Hofmeister, president Shell Oil Company

ronotte

#853
July 18, 2007, 04:24:08 AM
Hello Otto,

what happened exactly? We all are anxious to help you if possible!!

P.S. and oscillators are not a big problem.

Roberto

otto

#854
July 18, 2007, 05:37:30 AM
Hello all,

yesterday I tried to make a magnetic amplifier like in the picture showed yesterday. A little bias voltage.....2 contra connected coils like in the picture.....and thats it. In 1 moment rised the amperage from the power supply to an value that I even cant imagine.

Now you will say a short. Yes, but this is impossible. ALL my wires are very good isolated....

I really dont know what happened. I only pulsed the coils, changed the frequencies...

OK. Now I finally have the chance to build good oscillators.

@Roberto,

are your oscillators OK??
I have the 4427 ICs, not using them....I think I will build my oscillators like you have done it.

Otto
Print
Go Up Pages 1 ... 169 170 171 172 173 ... 358
User actions