Overunity.com Archives is Temporarily on Read Mode Only!



Free Energy will change the World - Free Energy will stop Climate Change - Free Energy will give us hope
and we will not surrender until free energy will be enabled all over the world, to power planes, cars, ships and trains.
Free energy will help the poor to become independent of needing expensive fuels.
So all in all Free energy will bring far more peace to the world than any other invention has already brought to the world.
Those beautiful words were written by Stefan Hartmann/Owner/Admin at overunity.com
Unfortunately now, Stefan Hartmann is very ill and He needs our help
Stefan wanted that I have all these massive data to get it back online
even being as ill as Stefan is, he transferred all databases and folders
that without his help, this Forum Archives would have never been published here
so, please, as the Webmaster and Creator of this Forum, I am asking that you help him
by making a donation on the Paypal Button above
Thanks to ALL for your help!!


The Brnbrade Coil/Overunity?

Started by Bruce_TPU, July 01, 2007, 12:14:40 AM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Print
Go Down Pages 1 2 3 4 5 ... 116
User actions

Bruce_TPU

#10
July 01, 2007, 02:04:27 AM
I am being a helping soul.  :)  Besides, one never knows.

Also, not long ago, I heard a story of someone who put long waves into a coil and got a surprise.  I am just helping out.

Brn brades idea is to have several of these coils in a circle in ECD fashion. 

Besides Mannix, I am always looking for pieces for they add up to the sum. ;)

Cheers,
Bruce
1.  Lindsay's Stack TPU Posted Picture.  All Wound CCW  Collectors three turns and HORIZONTAL, not vertical.

2.  3 Tube amps, sending three frequency's, each having two signals, one in-phase & one inverted 180 deg, opposing signals in each collector (via control wires). 

3.  Collector is Magnetic Loop Antenna, made of lamp chord wire, wound flat.  Inside loop is antenna, outside loop is for output.  First collector is tuned via tuned tank, to the fundamental.  Second collector is tuned tank to the second harmonic (component).  Third collector is tuned tank to the third harmonic (component)  Frequency is determined by taking the circumference frequency, reducing the size by .88 inches.  Divide this frequency by 1000, and you have your second harmonic.  Divide this by 2 and you have your fundamental.  Multiply that by 3 and you have your third harmonic component.  Tune the collectors to each of these.  Input the fundamental and two modulation frequencies, made to create replicas of the fundamental, second harmonic and the third.

4.  The three frequency's circulating in the collectors, both in phase and inverted, begin to create hundreds of thousands of created frequency's, via intermodulation, that subtract to the fundamental and its harmonics.  This is called "Catalyst".

5.  The three AC PURE sine signals, travel through the amplification stage, Nonlinear, producing the second harmonic and third.  (distortion)

6.  These signals then travel the control coils, are rectified by a full wave bridge, and then sent into the output outer loop as all positive pulsed DC.  This then becomes the output and "collects" the current.

P.S.  The Kicks are harmonic distortion with passive intermodulation.  Can't see it without a spectrum analyzer, normally unless trained to see it on a scope.

chrisC

#11
July 01, 2007, 02:22:18 AM
Brnbrade & Bruce:

A couple of weeks ago, you had a set-up with a vertical large magnet positioned over the coils. What is the difference between what you showed to what is here? Can you please draw a simple circuit and some more information about the sound?
It does look a lot simpler than a TPU/ECD, deceptively simple.

Also where/how is the loop closed?

Thanks

chrisC

Bruce_TPU

#12
July 01, 2007, 02:37:56 AM
Quote from: chrisC on July 01, 2007, 02:22:18 AM
Brnbrade & Bruce:

A couple of weeks ago, you had a set-up with a vertical large magnet positioned over the coils. What is the difference between what you showed to what is here? Can you please draw a simple circuit and some more information about the sound?
It does look a lot simpler than a TPU/ECD, deceptively simple.

Also where/how is the loop closed?

Thanks

chrisC

Hey Chris,
You can see where the magnet is in the pictures.  Right behind the coils.  It is large.  As for the sound waves, what do you want to know?  Stereo, two channels, I believe from his other posts.

He said he was wanting to close the loop in the future, ie switch the battery off, and also put it into a round shape that is more appealing to some here.  LOL

I asked him to get back to us when he takes a picture with a bulb attached, regardless of how bright it is, while he looks to borrow an amp meter.  He is anxious to prove that it is not a transformer, but that the magnet is interacting with the oscillations through vibrations on the coils to produce the additional power.  I think I said that right for him.

Cheers,
Bruce
1.  Lindsay's Stack TPU Posted Picture.  All Wound CCW  Collectors three turns and HORIZONTAL, not vertical.

2.  3 Tube amps, sending three frequency's, each having two signals, one in-phase & one inverted 180 deg, opposing signals in each collector (via control wires). 

3.  Collector is Magnetic Loop Antenna, made of lamp chord wire, wound flat.  Inside loop is antenna, outside loop is for output.  First collector is tuned via tuned tank, to the fundamental.  Second collector is tuned tank to the second harmonic (component).  Third collector is tuned tank to the third harmonic (component)  Frequency is determined by taking the circumference frequency, reducing the size by .88 inches.  Divide this frequency by 1000, and you have your second harmonic.  Divide this by 2 and you have your fundamental.  Multiply that by 3 and you have your third harmonic component.  Tune the collectors to each of these.  Input the fundamental and two modulation frequencies, made to create replicas of the fundamental, second harmonic and the third.

4.  The three frequency's circulating in the collectors, both in phase and inverted, begin to create hundreds of thousands of created frequency's, via intermodulation, that subtract to the fundamental and its harmonics.  This is called "Catalyst".

5.  The three AC PURE sine signals, travel through the amplification stage, Nonlinear, producing the second harmonic and third.  (distortion)

6.  These signals then travel the control coils, are rectified by a full wave bridge, and then sent into the output outer loop as all positive pulsed DC.  This then becomes the output and "collects" the current.

P.S.  The Kicks are harmonic distortion with passive intermodulation.  Can't see it without a spectrum analyzer, normally unless trained to see it on a scope.

brnbrade

#13
July 01, 2007, 02:43:29 AM
...

bob.rennips

#14
July 01, 2007, 03:34:10 AM
Hi Brnbrade,

Thanks for posting. I think you need to provide a detailed drawing of what wires are connected to what. The placement of the magnet. Where the poles are of the magnet are. Where the +ve. and -ve of the battary go. Whether the batteris are in series or parallel etc.

I really don't want to have another guessing game, SM pictures are quite enough!!
But in the last picture showing 250V the magnet does not appear to be part of the circuit ?

This circuit digrammer is quick and easy for drawing components and linking with wires:
http://www.falstad.com/circuit/

Select Menu 'Circuits' - item -'Blank Circuits' to get going.
RIGHT CLICK to access all the components and wires.

Cheer, Bob
Print
Go Up Pages 1 2 3 4 5 ... 116
User actions