Overunity.com Archives is Temporarily on Read Mode Only!



Free Energy will change the World - Free Energy will stop Climate Change - Free Energy will give us hope
and we will not surrender until free energy will be enabled all over the world, to power planes, cars, ships and trains.
Free energy will help the poor to become independent of needing expensive fuels.
So all in all Free energy will bring far more peace to the world than any other invention has already brought to the world.
Those beautiful words were written by Stefan Hartmann/Owner/Admin at overunity.com
Unfortunately now, Stefan Hartmann is very ill and He needs our help
Stefan wanted that I have all these massive data to get it back online
even being as ill as Stefan is, he transferred all databases and folders
that without his help, this Forum Archives would have never been published here
so, please, as the Webmaster and Creator of these Archives, I am asking that you help him
by making a donation on the Paypal Button above.
You can visit us or register at my main site at:
Overunity Machines Forum



Bob Boyce TPU thread

Started by hartiberlin, July 26, 2007, 12:03:41 PM

Previous topic - Next topic

0 Members and 2 Guests are viewing this topic.

Print
Go Down Pages 1 ... 11 12 13 14 15 ... 46
User actions

Bob Boyce

#60
August 03, 2007, 06:01:08 PM
The woven fiberglass sleeving was cut to size, installed on the longitudinal winding leads, and the core taped up a bit more with winding tape. I marked top and bottom for reference.

Bob

Bob Boyce

#61
August 03, 2007, 06:13:47 PM
I had to make up a small spool that could pass through the toroid hole. This was made from a 3 1/2" long piece of 1" electrical PVC tubing solvent welded to a couple of 2 3/4" diameter discs. These were cut from 1/4" PVC sheet. I turned these on the lathe so they would fit over the ends of the tubing.

I began winding the secondary. This will take me a while to wind and space evenly considering I get tired easy ;-)

Bob

weri812

#62
August 03, 2007, 08:01:24 PM
hi All

Got my fiberglass sleeve from  Skycraft Parts & Surplus ,
along with the wire i needed.

Now i wait.

wer
PUT YOUR MIND IN GEAR BEFORE  YOU PUT YOUR MOUTH IN MOTION

Bruce_TPU

#63
August 03, 2007, 08:34:50 PM
Quote from: Bob Boyce on August 03, 2007, 06:13:47 PM
I had to make up a small spool that could pass through the toroid hole. This was made from a 3 1/2" long piece of 1" electrical PVC tubing solvent welded to a couple of 2 3/4" diameter discs. These were cut from 1/4" PVC sheet. I turned these on the lathe so they would fit over the ends of the tubing.

I began winding the secondary. This will take me a while to wind and space evenly considering I get tired easy ;-)

Bob


Hi Bob,

Not a problem, we are a patient bunch.  (Most of the time... ;))  We are all waiting for our cores any way.  I for one would enjoy seeing a picture of your little winding spool that you made.  Also, do you already know how many feet of wire is required for the secondary winding?

Quote from: weri812 on August 03, 2007, 08:01:24 PM
hi All

Got my fiberglass sleeve from  Skycraft Parts & Surplus ,
along with the wire i needed.

Now i wait.

wer


Thank you Wer, and that is very good information as well.

Bruce
1.  Lindsay's Stack TPU Posted Picture.  All Wound CCW  Collectors three turns and HORIZONTAL, not vertical.

2.  3 Tube amps, sending three frequency's, each having two signals, one in-phase & one inverted 180 deg, opposing signals in each collector (via control wires). 

3.  Collector is Magnetic Loop Antenna, made of lamp chord wire, wound flat.  Inside loop is antenna, outside loop is for output.  First collector is tuned via tuned tank, to the fundamental.  Second collector is tuned tank to the second harmonic (component).  Third collector is tuned tank to the third harmonic (component)  Frequency is determined by taking the circumference frequency, reducing the size by .88 inches.  Divide this frequency by 1000, and you have your second harmonic.  Divide this by 2 and you have your fundamental.  Multiply that by 3 and you have your third harmonic component.  Tune the collectors to each of these.  Input the fundamental and two modulation frequencies, made to create replicas of the fundamental, second harmonic and the third.

4.  The three frequency's circulating in the collectors, both in phase and inverted, begin to create hundreds of thousands of created frequency's, via intermodulation, that subtract to the fundamental and its harmonics.  This is called "Catalyst".

5.  The three AC PURE sine signals, travel through the amplification stage, Nonlinear, producing the second harmonic and third.  (distortion)

6.  These signals then travel the control coils, are rectified by a full wave bridge, and then sent into the output outer loop as all positive pulsed DC.  This then becomes the output and "collects" the current.

P.S.  The Kicks are harmonic distortion with passive intermodulation.  Can't see it without a spectrum analyzer, normally unless trained to see it on a scope.

weri812

#64
August 03, 2007, 09:00:01 PM
taking in the extra windings and tape 

useing 16ga tifflon coating  at 200 turns will be a little
over 117 ft

PUT YOUR MIND IN GEAR BEFORE  YOU PUT YOUR MOUTH IN MOTION
Print
Go Up Pages 1 ... 11 12 13 14 15 ... 46
User actions