Selfrunning cold electricity circuit from Dr.Stiffler

[DrStiffler]

Everyone is so interested in getting to the end with just the two coils and ground so I have included a picture for thos that have the single coil circuit working. This would be the next step towards the dual coil system.

You need to perfectly match to single coil systems so that their response peaks match. When done you can drive one from your generator hot and one from ground as shown in the photo. The SEC zone extends some 3 meters. There is not much to explain here if you have the basic one coil working, make another and adjust one or the other to where they have the same energy peaks, then drive one from earth ground.

This is not simple induction between the coils, remember three meters away connected only to ground!

[armagdn03]

R Stiffler

have you noticed the extropy in the system? and its mirror oposite entropy? you are leading people down an interesting path I think will be most interesting when people realize it.

[hartiberlin]

Dear Ron,
looks nice,
but please try to build up your circuit
not anymore onto your experimentation breadboard.

These capacitances at these frequencies just have a major impact
and also the backplate aluplate...

What frequency did you use in this last test ?

Here are some more measurements from my latest setup:

oscillator Frequency : around 27 Mhz
Input Voltage : 12.5 Volts DC
Input DC current : 25 milliAmps

Input power: 312.5 milliWatts

DC Voltage at 10 LED stack: 31 Volts
DC current through 10 LED stack: 2 milliAmps

output power at the LEDs: 62 milliWatts

Without LED-AP load just feeding the oscillator at 27 Mhz:
Input Voltage : 12.7 Volts DC
Input DC current : 17 milliAmps

Input power: 215.9 milliWatts
So you see, although the brightness of the LED seems pretty bright,
they just only need around 62 milliWatts of power.

So you see, when we connect the LED load via the Avramenko plug
we raise the input power by 96.6 milliWatts
and get only 62 milliWatts of light power out there.
The rest is probably radiated away.
So I am still underunity with my circuit, although the LEDs
look pretty bright for this small 62 milliWatts of power...

So I just paid the cores to the Ebay seller and will now wait to
receive them.
Now back to some other circuits.

Regards, Stefan.

[dean_mcgowan]

R Stiffler

have you noticed the extropy in the system? and its mirror oposite entropy? you are leading people down an interesting path I think will be most interesting when people realize it.

Only time will tell .. cant wait for the grand finale video myself

[Branko]

I would like to see if this work or not...
If work in "generator in input" form, I know why.
If work in "2 core, without generator input" form, I would like to know source from ground.
In Tesla's patent ( 787 412 ), where he talk about 'standing waves', he was mention thunders storm waves (25-70 km from max to min point of wave).
Tesla's energy transmitter and receiver is easy for understanding (to me).

If this Stiffler's device work or not, I know that in ground we have energy in some form.
In Tesla's receiver we need two plates in the ground on some distance, and "no barrier" rectifier.
In 25 - 70 km wave form, we have lot of thunders waves energy (with lot of frequency form). Tesla was measure that form of energy.

White diodes is easy to light-on. 3 AAA type battery could work with 3 diodes around 100 hours (you can by it everywhere) .
It is easy to light-on 50 diodes, with 1.5 V converter and with 1 AAA battery, and have full light around 2 hours.

We will see...