Overunity.com Archives is Temporarily on Read Mode Only!



Free Energy will change the World - Free Energy will stop Climate Change - Free Energy will give us hope
and we will not surrender until free energy will be enabled all over the world, to power planes, cars, ships and trains.
Free energy will help the poor to become independent of needing expensive fuels.
So all in all Free energy will bring far more peace to the world than any other invention has already brought to the world.
Those beautiful words were written by Stefan Hartmann/Owner/Admin at overunity.com
Unfortunately now, Stefan Hartmann is very ill and He needs our help
Stefan wanted that I have all these massive data to get it back online
even being as ill as Stefan is, he transferred all databases and folders
that without his help, this Forum Archives would have never been published here
so, please, as the Webmaster and Creator of these Archives, I am asking that you help him
by making a donation on the Paypal Button above.
You can visit us or register at my main site at:
Overunity Machines Forum



Nathan Stubblefield Earth battery/Self Generating Induction Coil Replications

Started by Localjoe, October 19, 2007, 02:42:39 PM

Previous topic - Next topic

0 Members and 112 Guests are viewing this topic.

hansvonlieven

Quote from: Pirate88179 on February 14, 2008, 02:22:22 PM

@ Hans:

What do you think about my above remarks?  I realize this branch of research may be a little off topic but then again, maybe not.  How is your coil coming along?

Bill


G'day Bill,

I don't think you are off the topic at all. This area must definitely be investigated further.

Hans

BTW I am trying to get my hands on a camera so I can show you my coil.
When all is said and done, more is said than done.     Groucho Marx

Bruce_TPU

Quote from: Pirate88179 on February 14, 2008, 02:41:31 PM
@ Bruce:

Here is a modified version of your drawing showing how I believe we can use the coil cells for this.

Bill

Hi Bill,

Yes, your drawing is exactly what I hope works also.  This is something we must investigate right away.

Do you remember yours and my test, where we hooked a nine volt battery to the earth battery and the voltage and amperage jumped?

With no diodes, I see the current not only flowing to the load, but also flowing to the ground and then from ground back to the battery.  Almost like a capacitor on an L/C coil.

If this turns out to be true, it would be incredible....! 

Now we must verify.  (So little time, so many experiments!)  Remember to use a regular low voltage bulb and not an LED. 

Tonight I will finish winding three more layers on my coil.  I am hoping for 75 ma's.  I do not know how many we need, but that should be a good start.

@ Joe
I wonder what would happen if you placed your little discovery, between your primary and secondary of your Earth battery.  Then you would be sending High voltage pulsed into your secondary.  It would be a good test, since the rest of us have low voltage, high current to pulse.  We can see which is more effective, underground in garnering those Telluric Currents.  What kind of relay is it?  Did you get it from Radio Shack?  If so, what is the number and type?

Cheers,

Bruce

EDIT:
I am speculating now, but perhaps the way Stubblefields battery works is the same, as if we hooked up a battery as we plan on testing to see if it stays charged.  Perhaps as the secondary is pulsing, it begins to act as an electron pump as well?  We will see.
1.  Lindsay's Stack TPU Posted Picture.  All Wound CCW  Collectors three turns and HORIZONTAL, not vertical.

2.  3 Tube amps, sending three frequency's, each having two signals, one in-phase & one inverted 180 deg, opposing signals in each collector (via control wires). 

3.  Collector is Magnetic Loop Antenna, made of lamp chord wire, wound flat.  Inside loop is antenna, outside loop is for output.  First collector is tuned via tuned tank, to the fundamental.  Second collector is tuned tank to the second harmonic (component).  Third collector is tuned tank to the third harmonic (component)  Frequency is determined by taking the circumference frequency, reducing the size by .88 inches.  Divide this frequency by 1000, and you have your second harmonic.  Divide this by 2 and you have your fundamental.  Multiply that by 3 and you have your third harmonic component.  Tune the collectors to each of these.  Input the fundamental and two modulation frequencies, made to create replicas of the fundamental, second harmonic and the third.

4.  The three frequency's circulating in the collectors, both in phase and inverted, begin to create hundreds of thousands of created frequency's, via intermodulation, that subtract to the fundamental and its harmonics.  This is called "Catalyst".

5.  The three AC PURE sine signals, travel through the amplification stage, Nonlinear, producing the second harmonic and third.  (distortion)

6.  These signals then travel the control coils, are rectified by a full wave bridge, and then sent into the output outer loop as all positive pulsed DC.  This then becomes the output and "collects" the current.

P.S.  The Kicks are harmonic distortion with passive intermodulation.  Can't see it without a spectrum analyzer, normally unless trained to see it on a scope.

Pirate88179

@ Bruce:

I agree 100% with what you said in your last post.  I think the guy's (who replied on youtube) analogy might be brilliant:  Like bailing out a boat with a hole in it, the more you bail out, the more water flows in.  I have been thinking lately of experimenting with some solar cells along with our earth battery experiments.  I have been reading up on the latest in the solar area and this little discovery, again if true, could put that technology out in front of many others as it fixes a main drawback of that technology; no power generated at night or on cloudy days.  At one of the electronics supply/surplus sites Joe posted a while back, I found some amazing little cells that put out .9 vdc @ 2.0 amps!  These only cost like $4.00 ea.  I have seen solar panels (consisting of many cells) costing many, many dollars that don't put out that much.  Anyway, like you said, so many experiments, so little time, and $$.

Bill
See the Joule thief Circuit Diagrams, etc. topic here:
http://www.overunity.com/index.php?topic=6942.0;topicseen

Localjoe

@hans
Anytime  ;)

@Bruce

The relay is homade just like shown, i used 4 layers of the green "magnet" wire from Radio shack for the 4 inch bolt i wound it on, i think that was steel.  The metal thing that resembles a spring board is a coping saw  blade about an eight of an inch wide and probably 5 inches long
the contact above it looks like a nail but i dont have a nonmagnetic metal to use in skrew or nail form so i was just holding a peice of thin copper wire (stranded) gently on the saw blade and it starts vibrating rather quick never hits the electromagnet below it either just up and down in mid air.  It only took like 20 mins to build .. umm i have power tools that helped me a bit tho  :)
                                                 
                                                                                         Joe
GET THIS ONE - Bush wants to stop Iran from enriching uranium .. now as oberman said and others any drunk coke head can find out how to do this not just bush.

Also in reality Google has provided this info for some time.. so heres my point.

It's OK for GOOGLE TO PROVIDE INSTRUCTIONS FOR URANIUM ENRICHMENT but not OK FOR FOLKS TO SHARE TORRENTS OF MUSIC THEY POTENTIALLY OWN> AS WELL THEIR GOODS SHOULD BE SEIZED AND CHECKED AT AIRPORTS For copyright infringement.. ?????

This is the world we live in. More concerned if some exec doesn't get his buck than if some terrorist blows us to hell..

Bruce_TPU

@ Bill
Please repost that link for that cell, or PM it to me.  I would appreciate it very much.

@ Joe
Thanks!  It sounds like a great little relay.  I can't wait to see how it does hooked to your coil.

@ All
I just ran a great little experiment! 

Setup:

Carbon tube is North - Positive
Galvanized Spike is South - Negative (both have been in my yard for awhile. )
Voltage reading from this "couple"
.824 volts
Amperage reading from this "couple".
.12 ma

My "baby" coil, (Completely wrapped in cotton, to insulate!!) Buried 6 inches North of the carbon tube.
Voltage reading of "baby" coil
.710 volts
Amps reading of "baby" coil
.6 ma

NEXT:
I wired the "baby" coil in SERIES with the carbon and galvanized couple.

Volts
1.4 volts  ;D  (Cotton is the perfect insulator for these things!  We should be able to put as many in the ground as we want!!)

Amperage

2.2 ma's          (WHERE DID THESE EXTRA MA'S COME FROM?   ??? :D ;D ;D  )

SPECULATION:

The small baby coil, acting like a battery hooked to the "couple" in series put power into the couple and MORE power came back!

Of course we need many, many more tests, but I can not tell you how encouraged I am!

Cheers,

Bruce
1.  Lindsay's Stack TPU Posted Picture.  All Wound CCW  Collectors three turns and HORIZONTAL, not vertical.

2.  3 Tube amps, sending three frequency's, each having two signals, one in-phase & one inverted 180 deg, opposing signals in each collector (via control wires). 

3.  Collector is Magnetic Loop Antenna, made of lamp chord wire, wound flat.  Inside loop is antenna, outside loop is for output.  First collector is tuned via tuned tank, to the fundamental.  Second collector is tuned tank to the second harmonic (component).  Third collector is tuned tank to the third harmonic (component)  Frequency is determined by taking the circumference frequency, reducing the size by .88 inches.  Divide this frequency by 1000, and you have your second harmonic.  Divide this by 2 and you have your fundamental.  Multiply that by 3 and you have your third harmonic component.  Tune the collectors to each of these.  Input the fundamental and two modulation frequencies, made to create replicas of the fundamental, second harmonic and the third.

4.  The three frequency's circulating in the collectors, both in phase and inverted, begin to create hundreds of thousands of created frequency's, via intermodulation, that subtract to the fundamental and its harmonics.  This is called "Catalyst".

5.  The three AC PURE sine signals, travel through the amplification stage, Nonlinear, producing the second harmonic and third.  (distortion)

6.  These signals then travel the control coils, are rectified by a full wave bridge, and then sent into the output outer loop as all positive pulsed DC.  This then becomes the output and "collects" the current.

P.S.  The Kicks are harmonic distortion with passive intermodulation.  Can't see it without a spectrum analyzer, normally unless trained to see it on a scope.