Steven Mark`s TPU

[BEP]

Is there any idea how to better protect the equipment and your, my live?

Otto

Just a thought....
Place vertical coils at opposite sides. Drive them with the output of the TPU. When the output increases the fields in those coils increase. This should provide a braking effect like seen in old watt-hour meters (braking magnets). Place magnets over the ends of these coils to make them saturate sooner  

Or maybe that is all backwards.

I'll let you know what I do but first I need to make it work.

[wattsup]

@otto

Since z_p_e is no longer here, I will be lost for a while.

So.......... regarding your 3-stack protection, what if you use a zener diode at the required maximum voltage cut-off on the TPU output, then to a resistor then to a latching relay that will cut off the power supply. Any time you reach the maximum, the unit will shut -off.

[popolibero]

Hello all,

@Mario

sorry not to respond, I forgot.

The 3 stack picture is in the "some thoughts of how......" thread, page 1.

Otto

Hi Otto and all,

I'm sure you guys and especially you Otto have already tried almost all the possibilities and have narrowed the options down a lot through hard work and experiments wich are the only way to find out if something works rather than theorizing. So, I'm sorry if you already went through this, but from what I gathered reading SM's posts and his statement that Carl was right about most everything, in my head I started figuring the TPU as following: 3 collector coils, at least 3 control coils on each collector pulsed sequentially, meaning that on each collector coil there is a sequentially pulsed rotating magnetic field. Basically 3 rotating magnetic fields one on top of the other, and the 3 fields are pulsed at 3 different frequencies. The whole thing is wrapped in a control winding were the TPU output is fed back for resonance feedback and control. Reminds me a bit the Searl effect...
The collectors could be wired in series from the slowest one to the fastest in order to have the multiplied cannon/projectile effect.
I know you are way ahead, this is just a thought from a humble newbie, at least in the TPU stuff. Maybe you did this already?

regards,
Mario

[otto]

Hello all,

if allowed, the first time a little theory in simple words:

We have the 230V/50Hz or 110V/60Hz grid. The particles would move very slowly in a toroid, TPU but you can light a bulb BECAUSE the particles are moving slowly.

Now imagine a voltage of 12000V. AC, DC, it doesnt matter. In this 12kV the particles are veeeery fast. Try to light a bulb. No way because we have this 12kV in MILIAMPERES. The 12kV are only an example.

Now our TPU:

We are pulsing our TPU with waves (square or sine). Everybody has a biiiiig voltage. Look at the ECD TPU. But the problem is that the light was not sooo good. Maybe 60W. And I was sitting at this 60W for a long time because I didnt know what to do. Whats the problem??
With high accelerated particles you cant light a bulb.

What to do??

Decelerate the f....g particles. Slow them down!!!! Not stopping, SLOWING DOWN!!!

I wrote about this over 1 year ago but....

How?

TOP AND BOTTOM CONTROLS AND ALL COLLECTORS PULSED IN ONE DIRECTION AND NOW THE POINT, MIDDLE CONTROL COIL PULSED IN THE CONTRA DIRECTION.

In this way the particles are slowed down and you can light a bulb.

The result you can see with your 3 stack TPUs.

@EM

I want to thank you very much for your work on the micro TPU. I hope you didnt patent it ( just joking) because I want to use your little TPU to drive my 6" TPU. Of course I also want to thank the other guys working on your micro TPU.

The point of a self runner is that I saw a big mistake that I did: my self made power supply has an autotransformer. I dont have to say that Im feeding a lot of the TPU output power back to the grid!!! Im using only a part of the output to light my bulb. Everything else is feeded back and WASTED!!! S..t!!

Forgive me people!!

Guys, today its more then enough from me.

@Bep, wattsup, Mario, thanks for your help but.....

More tomorrow, on Sunday. When do I rest?? Hmmm...when I finish my work!!

Otto

[MACEDONIA CD]

hi
   
finaly somthing good

ASK FOR YOU
HOW TO MOVE   NUKLEUSE  OF  MAGNET ZONES  IN THE PERMANENT MAG NOT ELKTROMAGNET  FORCE 
SOMTHING  ELSE IS     
   P.S<<<<<<<MAGNET  IS LIKE  URANIUM  STANDING ALONE  WHIT  DOING NOTHING   >>>>\
HIT WHIT HAMER THE MAGNET ZONES  TO MOVE

THE SAME PROBLEM HAS BEING  ALSO WHIT THE URANIUM  TO START THE  ATOMS  TO SEPARATED  ITSELF
 
NOW  HOW    TO  START MAGNET ZONE TO  MOVE  IN ATHER WAY

<<<FOR START URANIUM TO GIVE ENERGY  IS HIT WHIT SOMTHING ELSE   AND THAT ELSE IS LITLE ENRGY  TO START BIG ENRGY>>>>


MAGNET PERM.. IS LIKE THAT  BUT HOW TO START WHIT SMALL ENRGY TO MOVE THIS NUCLEUSE INSAID 
WHIT ATHER WAY  >

THEORY<<<< IN PRACTICAL

EXPLANE  --------------  YOU HAVE GLASS SIMPLE  AND  PUT SOME AUDIO FREK  AND BOOM THE GLASS   THIS SMALL ENERGY IS  BRILIANT  + RESONANCE