Muller Dynamo

[giantkiller]

<sup>No more 'Side fumbling' here...
The frequency and severity of Coronal Mass Ejections are increasing.
http://www.spaceweather.com/

So you think you have the time to procrastinate for financial recovery? Think again my friends... These things we strive for are very temporary. I don't think a free energy device is of much use inside a microwave oven.

In a coil switching off, the key is to pulse again at the 75% mark up from the bottom of the spike thereby pushing the collapse into the coil to promote a positive upsurge. This leads to resonant rise energy formation. This can be done with a rotorized device also. This is what is on the scope.</sup>

[teslaalset]

Bloody hell you got a good imagination.

The Muller replication came around the same time as the launch of the Modular Rig System. The Modular Rig System was designed before the the Muller Replication was even started.

I did not realise the response so going to be so big on the Modular Rig System and we have had to stop taking orders, due to just not enough time.

As most people know I get 2 days back home each week to play with this stuff and this weekend just gone was spent drilling holes in bases. It was also winding the new coils with correct 7x0.125 stranded wire, while the machine was running.

I posted energy plots from using coils with the 7 x 0.250 wire and straight away got critised for not using correct coils, even though I pointed out it was just for testing the rig and out of curiosity.
So the next tests will be with the same coils as Romero used.

But it will be on my time line and when I get time. I do not get over excited these days on replications, done too many. So no rush and it will wait, I will come to my own conclusion and take it from there.

Also I have all the cores/wires and components arrive a couple of weeks ago to replicate Dr. Steven E. Jones' circuit and the X8 OU claim.
This interests me and looking forward to playing with this one, but again it will have to wait.

As far as Steorn, they have not even had contact with most of the SKDB for 3 months, so no idea what they are upto and not really that interested these days, if honest.
Certainly not working with them and never had. The E-Orbo test rigs were made for members of the SKDB and I did not charge a penny or take a penny from Steorn. Others supplied parts for those Rigs in the SKDB also, so a joint effort.

Now I have finished justifying myself to yet another stranger, I will get back to doing other stuff

Some guys just love any conspiracy theory!

Cheers

Sean.

Sometimes one has to provoke a bit to eliminate possibilities.
Thanks GLaNZeR for the quick response.

[Tudi]

<sup>No more 'Side fumbling' here...
The frequency and severity of Coronal Mass Ejections are increasing.
http://www.spaceweather.com/

So you think you have the time to procrastinate for financial recovery? Think again my friends... These things we strive for are very temporary. I don't think a free energy device is of much use inside a microwave oven.

In a coil switching off, the key is to pulse again at the 75% mark up from the bottom of the spike thereby pushing the collapse into the coil to promote a positive upsurge. This leads to resonant rise energy formation. This can be done with a rotorized device also. This is what is on the scope.</sup>

^{it was well predicted that these eruption swill increase even further in the upcomming years. This is a well known cycle in our sun life. We lived these cycles more then once..with luck we will spend more time near campfires
Not sure how that coil shorting poped in but sure sounds interesting enough.}

[kEhYo77]

@all
I've got a simple setup to play with, as RomeroUK suggested for a start. Right now I am controlling it using a micro controller ArduinoUNO. I have implemented driver coil pulsing with precision timing so my current draw is stable. I measure the RPM with a small LCD timer/counter counting the impulses from the Hall sensor, triggered by tiny magnets underneath the rotor plate. I have been doing coil shorting for quite some time but no matter what I do I can't get the rotor to speed up. I have tried many positions on the sine wave and different coil short times with no luck (although my little neon is blinking nicely)... My generator coils are bifilar in series and 2 of them again in series (10 mH, 2 Ohms each). My rotor is all north poles. I also have biasing magnets at the cores' back sides on all three coils in bucking mode - north facing north (not on the photo yet). I haven't managed to do the trick the other way with a AC capacitor in series either. I have only one channel scope maybe this is my problem...
Can my setup work with an AC cap in series at all?

[JouleSeeker]

[snip]
I did not realise the response so going to be so big on the Modular Rig System and we have had to stop taking orders, due to just not enough time.

Also I have all the cores/wires and components arrive a couple of weeks ago to replicate Dr. Steven E. Jones' circuit and the X8 OU claim.
This interests me and looking forward to playing with this one, but again it will have to wait.
[snip]
Cheers

Sean.

First, thank you Sean for working on that circuit (this is Dr. Jones) -- as you have time.  Nul-pts and Xee2 and ChrisC and a few others have done some great work along these lines already...

OK -- this discussion about how to make a decent "return on investment" was raised again today by Romero, with a solution embedded in the response by Sean above:

I did not realise the response so going to be so big on the Modular Rig System and we have had to stop taking orders, due to just not enough time.

So there is a huge demand -- not surprising really -- for a system that will allow for testing, as Gyula said:

This is a very good idea,  looks like a Lego set for free energy tinkerers... 

  If you could do something along these lines with your latest non-Muller device, Romero, many would be willing to buy a "Lego set" and put it together...

   I think Konehead (Doug) could also do this with his "OU pulse motor".
Ideal to start with an existing motor + generator and tell us how to modify it as you have done.

   My interest is personally not in making a lot of money on electrodynamic energy research, but rather in helping these devices to reach families and communities throughout the world, while preventing BigOyl from stomping or controlling the new energy source.  (Or even some smaller corporation that stomps on inventors because they want to "protect their patent;" either of the above may have happened to friend Romero.)

   The answer, IMHO, is to do as Sean is doing... "Lego sets" for us nerds who want to build and at the same time make a little money in our local areas while working towards independence from grid/greed.  A royalty would go to the "Lego set" provider via signed agreement on purchase of a Lego set (e.g. with Sean or Konzen or Romero) for each unit built and sold locally.   

The idea is to get the idea out quickly with local "businesses" building the units in non-centralized fashion; with royalties going back to the inventors. OK, signed honor-system, but I think this is better than expecting big gov't to protect your patent from BigOyl etc..

If centralized power is the problem, then independent off-grid families and communities are the answer...

"Revenge of the Nerds"!   

How's that sound?

PS -- I would forget about the 3-year patent procedure followed by more years of fighting down the attempts to steal it from you...  Gov't may stomp on you right away, saying your invention is a "national security" matter, as now some Gov'ts evidently seek to protect the profits of Big Global Corps and Banks.