Overunity.com Archives is Temporarily on Read Mode Only!



Free Energy will change the World - Free Energy will stop Climate Change - Free Energy will give us hope
and we will not surrender until free energy will be enabled all over the world, to power planes, cars, ships and trains.
Free energy will help the poor to become independent of needing expensive fuels.
So all in all Free energy will bring far more peace to the world than any other invention has already brought to the world.
Those beautiful words were written by Stefan Hartmann/Owner/Admin at overunity.com
Unfortunately now, Stefan Hartmann is very ill and He needs our help
Stefan wanted that I have all these massive data to get it back online
even being as ill as Stefan is, he transferred all databases and folders
that without his help, this Forum Archives would have never been published here
so, please, as the Webmaster and Creator of these Archives, I am asking that you help him
by making a donation on the Paypal Button above.
You can visit us or register at my main site at:
Overunity Machines Forum



Working Magnetic Motor on you tube??

Started by Craigy, January 04, 2008, 04:11:39 PM

Previous topic - Next topic

0 Members and 46 Guests are viewing this topic.

Print
Go Down Pages 1 ... 434 435 436 437 438 ... 613
User actions

Bruce_TPU

#2175
February 04, 2008, 07:28:18 PM
Hello all,

I ordered from Mike, today, two ABEC 7 bearings, in preparation for my correct sized and weight Rotor to arrive.

I have asked Mike, the bearing guy, to look at the photo of Al's bearing to see if he can identify it.  It is a closed bearing from what I can see.  Al said stainless steel.  And being enclosed, it has lubricant already in it.  So that solves the lubricant question in my mind.

Anyway, Mike agreed, and when my new bearings arrive, tomorrow or Wednesday, I will listen to what he has to say about them.

Cheers,

Bruce

1.  Lindsay's Stack TPU Posted Picture.  All Wound CCW  Collectors three turns and HORIZONTAL, not vertical.

2.  3 Tube amps, sending three frequency's, each having two signals, one in-phase & one inverted 180 deg, opposing signals in each collector (via control wires). 

3.  Collector is Magnetic Loop Antenna, made of lamp chord wire, wound flat.  Inside loop is antenna, outside loop is for output.  First collector is tuned via tuned tank, to the fundamental.  Second collector is tuned tank to the second harmonic (component).  Third collector is tuned tank to the third harmonic (component)  Frequency is determined by taking the circumference frequency, reducing the size by .88 inches.  Divide this frequency by 1000, and you have your second harmonic.  Divide this by 2 and you have your fundamental.  Multiply that by 3 and you have your third harmonic component.  Tune the collectors to each of these.  Input the fundamental and two modulation frequencies, made to create replicas of the fundamental, second harmonic and the third.

4.  The three frequency's circulating in the collectors, both in phase and inverted, begin to create hundreds of thousands of created frequency's, via intermodulation, that subtract to the fundamental and its harmonics.  This is called "Catalyst".

5.  The three AC PURE sine signals, travel through the amplification stage, Nonlinear, producing the second harmonic and third.  (distortion)

6.  These signals then travel the control coils, are rectified by a full wave bridge, and then sent into the output outer loop as all positive pulsed DC.  This then becomes the output and "collects" the current.

P.S.  The Kicks are harmonic distortion with passive intermodulation.  Can't see it without a spectrum analyzer, normally unless trained to see it on a scope.

Yadaraf

#2176
February 04, 2008, 07:52:27 PM
Quote from: mramos on February 04, 2008, 07:15:42 PM
John Lennon, Imagine...

Uploading it now (sending it) to letussendyoursongintospace@nasa.gov. The toll free number did not work, but the link they emailed me I was able to buy 2000 acres on the moon, and it was cheap.  Might get 2000 more tomorrow..  Mars is a little less, gonna order some of that too.

So anyone seen this magic motor, that does not degauss?  Seen it spin up after a hard spin and gain speed and run for 7 hours?

And who is Al?  If he has one why can we not see it?  7 hours running.  That is impressive.  MIB got him or OIL people made him rich..  OR IT DID NOT WORK?



Mramos,

LOL.  I didn't know NASA was accepting uploads. 

I hope they know what they're doing.  I hope I never have to say.  "Gort! Klaatu barada nikto!"

Cheers,  :)

Yada..
.

blue_energy

#2177
February 05, 2008, 01:02:02 AM
Quote from: Yadaraf on February 04, 2008, 06:48:05 PM
Quote from: mramos on February 04, 2008, 04:56:03 PM
I do not work for NASA, so I can not say what they sent into space this morning.  Sure there is a crackpot website that will tell me if I look. 

But I would think it was English if they did.  If not, I wish they would save my tax dollars for something with a big bright flame.  So NASA thinks the people in space do not speak English, but speak a tongue from this planet..  Cool.  Glad they are on top of the Universe and have it all figured out.

So these charts are based on audio from a video file clip from the internet?

An Dean is the crazy one here...  OK..

Off to find a good song and see if I can get a @nasa.gov email and "request form" so I can have this song I like sent up in the morning.

Some people took Close Encounters a little too close..  It was a movie..

Mramos,

Here is the official news release @ Nasa.gov:

NASA to Beam Beatles' 'Across the Universe' Into Space

... http://www.nasa.gov/topics/universe/features/across_universe.html

My favorite version is sung by Fiona Apple.  Check it out @YouTube.

Cheers,  :)

Yada..
.

In some distant future, aliens on a far distant world will gather around their version of SETI and thrill that a planet in the Sol system, long ago, beamed yet another message directly at them - and lament that, to this point, no-one has figured out how to decipher it.  "They didn't send it to just anywhere, did they?  They sent it to us.  They sent it centuries ago - how could they even know we'd be here!?  It must mean something!  Every few years, a new message - and we fail the test..."

j7

#2178
February 05, 2008, 01:48:21 AM
@meggerman   
This is the first post that I have made to this and any other form so dare say that I will screw it up some how. 
As I have followed the threads there is one glaring observation that I have not yet seen even after having read all the miles of script and dialog posted. It is rather obvious that the bearings are a real bugaboo. This application of ball bearings is pure torture to them plain and simple. Ball bearings are designed for rotary motion not oscillation, especially at the speeds required in this application. So?? what ever happened to the old low tech device, the bronze oil impregnated bearing? In the electrical industry they are the product of choice in large horsepower motors. Just ask an engineer to put a bearing with balls into a 4000 HP electric motor. I?d like to see the look on the face of the engineer who designs these large horse power motors when he hears that one. There is an amazing durability and reliability to these bearing IF they are kept oiled properly. I do understand that ?replication? is the goal but with all the variations to the basic theme why this one has not been explored is beyond me.

Cheers

j7   

vipond50

#2179
February 05, 2008, 02:19:05 AM
Quote from: j7 on February 05, 2008, 01:48:21 AM
@meggerman   
This is the first post that I have made to this and any other form so dare say that I will screw it up some how. 
As I have followed the threads there is one glaring observation that I have not yet seen even after having read all the miles of script and dialog posted. It is rather obvious that the bearings are a real bugaboo. This application of ball bearings is pure torture to them plain and simple. Ball bearings are designed for rotary motion not oscillation, especially at the speeds required in this application. So?? what ever happened to the old low tech device, the bronze oil impregnated bearing? In the electrical industry they are the product of choice in large horsepower motors. Just ask an engineer to put a bearing with balls into a 4000 HP electric motor. I?d like to see the look on the face of the engineer who designs these large horse power motors when he hears that one. There is an amazing durability and reliability to these bearing IF they are kept oiled properly. I do understand that ?replication? is the goal but with all the variations to the basic theme why this one has not been explored is beyond me.

Cheers

j7   

Here Here j7
U are quite correct.
B.
Print
Go Up Pages 1 ... 434 435 436 437 438 ... 613
User actions