My s1r9a9m9 replication!

[pablitosax]

xbox hacker  :

About your schematic:

You obtain AC 110v of your inverter,yes ?..but this is AC, and you send it to a spark plug whit a serial diode , yes ?. Are one point that your obtain 0 volt at your spark plug....(semi-senoidal signal each 50 hz ...).
That is what we're looking for?
would be wrong to rectify and put a capacitor before the microwave diode ?

[xbox hacker]

xbox hacker  :

About your schematic:

You obtain AC 110v of your inverter,yes ?..but this is AC, and you send it to a spark plug whit a serial diode , yes ?. Are one point that your obtain 0 volt at your spark plug....(semi-senoidal signal each 50 hz ...).
That is what we're looking for?
would be wrong to rectify and put a capacitor before the microwave diode ?

In the real S1r video on youtube, he would appear not to be using a bridge rectifier...one leg of the 110v to the can and one to the base of the plug.

[22vision]

Cap I am having some issues I had some great spark but never with the inverter connected so I figured I would try
so I went and got a 25$ inverter 400W and reied it and POOF smoke and fire came out of it! I didn't catch anything on fire thank god!

any Iedas as to what might be wrong sorry for the bad pic!

If I disconnect the inverter circuit all works well and I get a nice spark but if I connect well...............poof
or no spark at all!

[ninjadaniel]

Cap I am having some issues I had some great spark but never with the inverter connected so I figured I would try
so I went and got a 25$ inverter 400W and reied it and POOF smoke and fire came out of it! I didn't catch anything on fire thank god!

any Iedas as to what might be wrong sorry for the bad pic!

If I disconnect the inverter circuit all works well and I get a nice spark but if I connect well...............poof
or no spark at all!

Could be that your spark is more powerful than all your combined diodes and is going back to the inverter.  Remove the 'dc pos lead' from the bridge rectifier, remove the spark plug and see if you can get the 'dc pos lead' to arc against the grounding point you just took off the plug, this would mean that your diodes are not overcoming the HV from the coil.  Please dont touch the terminals like i did.. numerous times.  I am having the same issue currently as my jacobs ladder makes the coil run at far greater frequency than a car would.

[pablitosax]

Hi :

We can found schematics about s1r9a9m9 in this link :

http://sdch2o.free.fr/vrac/        (download the watercar.rar archive )




regards.