Stubblefield coils (bifilar) and speculations

[jeanna]

There are different demintions it is only by phase shifting driving the different <more than 1 180s driven in to each other>The bifilar does the 180 out the rest of the story.regards Andy

Andy,
This is very much the line of thinking I am wanting to be on.

The following examples may NOT be phase shifts because the cycle is not exactly the same:

If 2 cellos are looking for the same A440 but they are not exactly right on, there is an audible beat. This beat gets faster as the 2 cellos get more in tune and  the frequency is matching closer and closer.
A musical "round" is really a better example of a phase shift in music, I guess.


Precession of the equinoxes is another example,  the precession of the moon every month is another. These both come about because the orbits are a different diameter so it may not be phase. Just concentric neighbors.

I know the sound thing can cause antigravity. I didn't think I would ever meet someone who could talk about it, though. And I certainly didn't know the role of phonons. I look forward to learning more.

wonderful.
-----------
Koen started a thread about the cadeusus.. As he was describing it and making his own very interesting comments,  I realized the NS battery is a cadeusus. - There are many differing examples of the cadeusus and many of them have the snake tails connected. So if one snake= one bifilar wind, this battery is in the form of a cadeusus.

If that weren't enough, the next post showed a thing from the JLNaudin site with the same kind of coils wound the way we are winding them with 6 layers,(just copper but down and back, I mean,)  which has anti faraday shielding properties !!!

Whatever NS did he, like Tesla could have taken our planet to a great place if circumstances had been different. I keep wanting to say (In the words of OB1) "Nows the time"

Andy, thank you so much for your input,

jeanna

[1tesla01]

Jenna, A cadeusus,bifilar,and a moebius coil, all do this phase shift, only different patterns.Which is why all have to do with antigravity and free energy.All the strange effects we all have seen through these coils.There is another way: it is through the center of a silonoid.The same wave pattern or what we call a standing wave.All 180 out.When two waves converge.at certin angles.mostly (45s) degees,comming from different angles like 2 - 45s intersecting (>) example or 4 - 45s (x) example.the 4 45s =180 out x 4 = 720 out of phase "forth demision" = Antigravity or 8 x 180 out = warp! =1440 out!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! the interesting part is the (intensity or how much power is backing it up ) = frequency, voltage,and amperage.This is the push, look how lifters are made. I wrote about them to jnaudin in 1998-1999 and 2000.Then another friend of jnaudin, DeAquino came out with great!!!!!! formula on antigravity in 2000.Which still equals -0- I have been screaming for years.If you look at the wave pattern in the lifter you will see the waves comming from all different directions slaming against each other.Then look what I have been writing for years.Example THIS reply save this. lOOk and see the (center) where all the (waves drive into themselves.)This is the (center) of a circle or triangle mabe a hexagon,square, the waves still drive into themselves which is the (center.)The amplifier is the tesla coil one very small can buy one for about 50 USD.This is the e-mail of the centry if you pay attention to waht is here in this reply Regards Andy McQuerry e-mail address (phononstring@yahoo.com) phone 870-862-8020

[Pirate88179]

@ Jeanna:

I believe your description of the two cellos is not correct.  I have never played a cello but have played guitar for over 30 years.  When tuning a tensioned string to another, the beats get slower as they come into tune.  I taught myself how to tune pianos using this method. (It is not easy, I have only tuned 2 of them)  You can hear the beats and adjust accordingly.  As they slow, you know you are closer and keep going in that direction.

As far as not being able to "see" ac, we see it every day.  When I first got my new monitor, it was set on default at 60hz refresh rate.  I got very bad headaches and eyestrain within a few minutes of using it.  I found I could reset the rates to 75 hz, which my eyes can not seem to detect.  If you blink your eyes very fast, you can see the strobe effect on a regular light bulb if you can't see it already.  Our eyes get used to it but 60hz is not a good frequency for most humans.  If you have access to an adjustable strobe light, you can tune it to see the 60hz pulses on any electric light source.  You can either freeze it on, or off.  Well, you have to consider that the true hz of our electrical power varies as well, within a certain tolerance set by the power company.

Why am I telling you this?  I don't know.  I guess it is just yet more trivial information that I seem to have and wanted to pass it on.  I have to pretend like I know some things right?

As we all talked about in the "old" days, remember Hans's work with Keely?, resonance is probably everything.  And on many levels.  I like your thoughts on reversing Les Paul's pick-up design to use on our systems.  If things convert one way, why not the other?  I try to think like that myself and I believe our best creations may come out of that kind of thinking.  Hey, gas heats when compressed, why not decompress it for air conditioning or refrigeration?  LEDS light up with electricity, why not shine light on them to produce electricity? (which is now being done, and I have done this myself after reading about it)  It takes electricity to separate water into hydrogen and oxygen, why not combine them to produce electricity?  (fuel cells)  Great thinking Jeanna.

Bill

[resonanceman]

I  have made a couple  very simple  coils to test  the  some of the  A field properties of  copper and iron .

I  started  with  2 cores  one  #6  copper   another  iron  rebar tie wire  4 painted strands .

Over  the cores I slipped  a  polyethelene tube  as insulation .

I then  wrapped  each  core with wire .   Painted  rebar tye wire on  the copper  core   21 gage magnet  wire on the  iron  core.    It  would  have been nice to  have  a little closer match in wire size .  but I  have to use what I have on hand.


I didn't  get any  DC on any  reading.

I also  didn't get any usable   power , these are small coils  ..... no real power was expected.

Iron  core

5  & 6    .020  V AC

Copper core

5 & 6    .028 V AC


When  placed  on my wet pancake  coils     the readings were.

Iron  core

5&6    .060 V AC

copper core

5&6   .065 V AC

I am planning on adding a few more layers on both of these coils and making them into cadeusus coils .
I am  thinking of adding  copper  winding  to  the  copper  core coil   for  its 3rd and 4th  layers .  I am guessing that the iron windings will act like a   core .   



I have all the parts  ready to  wind a 3rd pancake  coil  tonight
It  will have the copper  insulated   with plastic .
It  will be interesting  to see  if a non  galvanic   coil  adds to the  galvanic  coils .

gary

[Pirate88179]

@ Gary:

Wow!  That's a lot of winding.  I too have been thinking of alternative core materials.  More on this later.

Bill