HIGH QUALITY TPU DVD Video Released from Jack Durban

[EMdevices]

Where is the energy imbalance to start the reaction?

Like in oscillators (with the right gain and positive feedback) what starts the oscillations?Ã, Ã,  It's the constant electrical noise, very small, but quickly can amplify and cause big signals.Ã, 

Or,Ã,  in a speaker/mic causing feedback and the ear pearcing ringing, what initiates that?Ã, Ã,  Even the smallest actual audio noise.

However, he places a magnet there,Ã,  that's quite something.Ã, Ã,  Also notice he does not turn ON any switch or anything, he just places a magnet there.Ã,  That's how the device starts it's operation.Ã, Ã,  Got theories?Ã, Ã,  I do.

EM

P.S.   Here's some practical advice.   Free you mind from all you heard from SM via Lindsay.  Imagine that it was something else, and then look at the videos as if you never saw them before, and just take it in for what it's worth.  It's easier than done, since our minds are so bent on "curvefitting" everyting we see into some theory or patern.  After all, storage space is limited and "compression" of info must take place in our minds. 

[innovation_station]

so consider this

scalabilty is no problem. Jack you know mosfets were available in the 80's when SM developed this tech. If those are fets in the ftpu, they are large package devices. high power is not required here, and the small blue unit obviously is a much later model and could have used surface mount mosfets...they are pretty small, and were available in the 90's. yes a small button battery or 2 may be all that is required to get the process going.

yes, the control boxes...a diversion? i really doubt that. if that's the case then you should be questioning everything you see on the ftpu (and all the others) as a possible diversion, including that spiral wrap thingy of yours, and the choke. see where this goes?

sm agreed with carl saying sequential pulsing of coils. that's not really possible without some electronics.

there are electronics in there, in some cases minimal, but there

im not so sure i beleave this quote i bolded   could you not do this with  spark gaps and diffrent value caps ?? and i guess if you were tesla you could wind your coils so as you dont need a diode

i do not claim to be correct in this thing  altho tests i have done and things i have seen lead me to beleave it is a simple device with out electronics  the basic unit anyways and if not sm's device the little mess i made a wile ago did some verry neat things

the advanced units i beleave they make rotating standing waves with electronics thus elemanitaning the heat problem

@sparks nice post     

oh wait a min....    i have a coil  just like ....   where is it agin.....   oh yea the turbo coil

here is a link  it is a invertor or a convertor    http://www.overunity.com/index.php/topic,2220.0.html

been here a wile .....

ist

[Grumpy]

Where is the energy imbalance to start the reaction?

Like in oscillators (with the right gain and positive feedback) what starts the oscillations?   It's the constant electrical noise, very small, but quickly can amplify and cause big signals. 

Or,  in a speaker/mic causing feedback and the ear pearcing ringing, what initiates that?   Even the smallest actual audio noise.

However, he places a magnet there,  that's quite something.   Also notice he does not turn ON any switch or anything, he just places a magnet there.  That's how the device starts it's operation.   Got theories?   I do.

EM

P.S.   Here's some practical advice.   Free you mind from all you heard from SM via Lindsay.  Imagine that it was something else, and then look at the videos as if you never saw them before, and just take it in for what it's worth.  It's easier than done, since our minds are so bent on "curvefitting" everyting we see into some theory or patern.  After all, storage space is limited and "compression" of info must take place in our minds. 

I don't recall SM ever stating or even implying that a magnet was "required" for operation.  If this was the case, then would external magnetic fields pose a problem.

Also, the TPU doesn't seem to interfere with the TV.  Is it even "electromagnetic" after all?

[wattsup]

@JD

You say there is no battery because you do not conceive seeing him taking off all that tape. Who said you have to take all the tape off. If I had a battery in the small taped TPUs it would be under the first tape I removed, not the last. No one was every allowed to take one apart besides the cut-away. On the smallest taped TPU, you would have to take a look to see if a part of that wrinkled tape covering is newer then the rest. That would explain battery change. All the other devices all have their places for a battery. But right now I am concentrating on the FPTU.

@EM

I have been using the new VirtualDubMod with all those filters. But I really miss being able to zoom in and then pan around the image. Then do some forward/backwards movement. It's too bad I cannot pan or there is no scroll bars.

As for no pulsing. This is DC and if there is no pulsing, there is no primary to secondary coupling. The toroid would not produce current on that 8 laced black wire and you would just produce heat.

Let me show you somethings.

Photo ftpu-maybe-reed1.jpg shows A and B point. The A point is a connection with some spaghetti tube right next to the toroid and the magnet area. There could be a reed in there easy. The B point direct to the top of the toroid are where there is a same spaghetti connector just hanging over the toroid. You cannot see it in the photo because you have to play around with the image to see it but it is there. A is on the right half, B is on the left half. Why would you have this there?

Photo ftpu-battery1.jpg points to the underside center hole that is very bright for a hole. When you look closely, you will see what looks like the positive of a B type 1.5 volt battery. You can also see there is a wire there that just stops on the surface of the battery. Have you ever soldered a wire to a battery. lol

The picture you posted showing the three white wires rising from the center is very good also. When you follow these wires, you will see they are connected to the primary in the way shown in my animation. But that is not important right now.

I asked about Zener diodes on a previous post that I referred you guys to the Tesla Project thread. In the Tesla Project thread, we have shown that you can energize a circuit, make a short, and use the flyback. Making two movements for the price of one. And all that's required is a short. But I do not think SM was that advanced to think of the flyback.

The FPTU in probably using two loops, one low level loop that is isolated from the higher voltage loop coming from the primary/secondary action. The isolation is taking place in the toroid by the black wire that is laced through the toroid holes. I will get into this aspect soon but need a few more pieces of the puzzle. Looks like

Meanwhile............

1) If there are any EE guys like @eldarion that can make a quick mock up of the FTPU rings using two iron wires and a secondary wire and wrap four primaries of maximum 12 turns per quad, then connect as per the animation  and do some alternating pulsing and measure the secondary output, this would help incredibly at this stage. You can then try other primary connecting schemes and polarities to finalize this section.

2) If there are any guys that have a virgin toroid core, make 4 holes on each half, lace a thin multi-strand wire through the holes, then wrap two coils on each half and do some testing, this again would help advance forward.

[sparks]

  Wattsup.,

The magnet is used just like a speaker magnet is used as a reference.  Then you sense the change in the magnetic field so you know what the Earth's magnetic field is doing.  Obviously SM didn't know what his machine was doing at this stage in product development he just knew how it worked.
 
@ Inno

  Too old guy Stephan made it disappear.  Thanks which one.?  My electric motor that is run by an inverter spiked  4000 times a second is burning electrons in my modem to street dsl connection this morning.  Voltage signal is so low from the modem I've got communications problems.  I've got to shield the line to stop the fire.